Fix ICE when parsing bad turbofish with lifetime argument
Generalize conditions where we suggest adding the turbofish operator, so we don't ICE during code like
```rust
fn foo() {
A<'a,>
}
```
but instead suggest adding a turbofish.
Fixes#93282
Remove deduplication of early lints
We already have a general mechanism for deduplicating reported
lints, so there's no need to have an additional one for early lints
specifically. This allows us to remove some `PartialEq` impls.
Store a `Symbol` instead of an `Ident` in `AssocItem`
This is the same idea as #92533, but for `AssocItem` instead
of `VariantDef`/`FieldDef`.
With this change, we no longer have any uses of
`#[stable_hasher(project(...))]`
Remove ordering traits from `OutlivesConstraint`
In two cases where this ordering was used, I've replaced the sorting to use a key that does not rely on `DefId` being `Ord`. This is part of #90317. If I understand correctly, whether this is correct depends on whether the `RegionVid`s are tracked during incremental compilation. But I might be mistaken in this approach. cc `@cjgillot`
Use error-on-mismatch policy for PAuth module flags.
This agrees with Clang, and avoids an error when using LTO with mixed
C/Rust. LLVM considers different behaviour flags to be a mismatch,
even when the flag value itself is the same.
This also makes the flag setting explicit for all uses of
LLVMRustAddModuleFlag.
----
I believe that this fixes#92885, but have only reproduced it locally on Linux hosts so cannot confirm that it fixes the issue as reported.
I have not included a test for this because it is covered by an existing test (`src/test/run-make-fulldeps/cross-lang-lto-clang`). It is not without its problems, though:
* The test requires Clang and `--run-clang-based-tests-with=...` to run, and this is not the case on the CI.
* Any test I add would have a similar requirement.
* With this patch applied, the test gets further, but it still fails (for other reasons). I don't think that affects #92885.
Work around missing code coverage data causing llvm-cov failures
If we do not add code coverage instrumentation to the `Body` of a
function, then when we go to generate the function record for it, we
won't write any data and this later causes llvm-cov to fail when
processing data for the entire coverage report.
I've identified two main cases where we do not currently add code
coverage instrumentation to the `Body` of a function:
1. If the function has a single `BasicBlock` and it ends with a
`TerminatorKind::Unreachable`.
2. If the function is created using a proc macro of some kind.
For case 1, this is typically not important as this most often occurs as
a result of function definitions that take or return uninhabited
types. These kinds of functions, by definition, cannot even be called so
they logically should not be counted in code coverage statistics.
For case 2, I haven't looked into this very much but I've noticed while
testing this patch that (other than functions which are covered by case
1) the skipped function coverage debug message is occasionally triggered
in large crate graphs by functions generated from a proc macro. This may
have something to do with weird spans being generated by the proc macro
but this is just a guess.
I think it's reasonable to land this change since currently, we fail to
generate *any* results from llvm-cov when a function has no coverage
instrumentation applied to it. With this change, we get coverage data
for all functions other than the two cases discussed above.
Fixes#93054 which occurs because of uncallable functions which shouldn't
have code coverage anyway.
I will open an issue for missing code coverage of proc macro generated
functions and leave a link here once I have a more minimal repro.
r? ``@tmandry``
cc ``@richkadel``
Move param count error emission to end of `check_argument_types`
The error emission here isn't exactly what is done in #92364, but replicating that is hard . The general move should make for a smaller diff.
Also included the `(usize, Ty, Ty)` to -> `Option<(Ty, Ty)>` commit.
r? ``@estebank``
Properly track `DepNode`s in trait evaluation provisional cache
Fixes#92987
During evaluation of an auto trait predicate, we may encounter a cycle.
This causes us to store the evaluation result in a special 'provisional
cache;. If we later end up determining that the type can legitimately
implement the auto trait despite the cycle, we remove the entry from
the provisional cache, and insert it into the evaluation cache.
Additionally, trait evaluation creates a special anonymous `DepNode`.
All queries invoked during the predicate evaluation are added as
outoging dependency edges from the `DepNode`. This `DepNode` is then
store in the evaluation cache - if a different query ends up reading
from the cache entry, it will also perform a read of the stored
`DepNode`. As a result, the cached evaluation will still end up
(transitively) incurring all of the same dependencies that it would
if it actually performed the uncached evaluation (e.g. a call to
`type_of` to determine constituent types).
Previously, we did not correctly handle the interaction between the
provisional cache and the created `DepNode`. Storing an evaluation
result in the provisional cache would cause us to lose the `DepNode`
created during the evaluation. If we later moved the entry from the
provisional cache to the evaluation cache, we would use the `DepNode`
associated with the evaluation that caused us to 'complete' the cycle,
not the evaluatoon where we first discovered the cycle. As a result,
future reads from the evaluation cache would miss some incremental
compilation dependencies that would have otherwise been added if the
evaluation was *not* cached.
Under the right circumstances, this could lead to us trying to force
a query with a no-longer-existing `DefPathHash`, since we were missing
the (red) dependency edge that would have caused us to bail out before
attempting forcing.
This commit makes the provisional cache store the `DepNode` create
during the provisional evaluation. When we move an entry from the
provisional cache to the evaluation cache, we create a *new* `DepNode`
that has dependencies going to *both* of the evaluation `DepNodes` we
have available. This ensures that cached reads will incur all of
the necessary dependency edges.
The previous PR, #93165, still performed the drop range analysis
despite ignoring the results. Unfortunately, there were ICEs in
the analysis as well, so some packages failed to build (see the
issue #93197 for an example). This change further disables the
analysis and just provides dummy results in that case.
This agrees with Clang, and avoids an error when using LTO with mixed
C/Rust. LLVM considers different behaviour flags to be a mismatch,
even when the flag value itself is the same.
This also makes the flag setting explicit for all uses of
LLVMRustAddModuleFlag.
Revert "Do not hash leading zero bytes of i64 numbers in Sip128 hasher"
Reverts rust-lang/rust#92103. It had a (in retrospect, obvious) correctness problem where changing the order of two adjacent values would produce identical hashes, which is problematic in stable hashing (see [this comment](https://github.com/rust-lang/rust/pull/92103#issuecomment-1014625442)).
I'll try to send the PR again with a fix for this issue.
r? `@the8472`
Check `const Drop` impls considering `~const` Bounds
This PR adds logic to trait selection to account for `~const` bounds in custom `impl const Drop` for types, elaborates the `const Drop` check in `rustc_const_eval` to check those bounds, and steals some drop linting fixes from #92922, thanks `@DrMeepster.`
r? `@fee1-dead` `@oli-obk` <sup>(edit: guess I can't request review from two people, lol)</sup>
since each of you wrote and reviewed #88558, respectively.
Since the logic here is more complicated than what existed, it's possible that this is a perf regression. But it works correctly with tests, and that makes me happy.
Fixes#92881
We already have a general mechanism for deduplicating reported
lints, so there's no need to have an additional one for early lints
specifically. This allows us to remove some `PartialEq` impls.
rustc_mir_itertools: Avoid needless `collect` with itertools
I don't think this should have measurable perf impact (at least not on perf.rlo benchmarks), it's mostly for readability.
Liberate late bound regions when collecting GAT substs in wfcheck
The issue here is that the [`GATSubstCollector`](https://github.com/rust-lang/rust/blob/master/compiler/rustc_typeck/src/check/wfcheck.rs#L604) does not currently do anything wrt `Binder`s, so the GAT substs it copies out have escaping late bound regions when it walks through types like `for<'x> fn() -> Self::Gat<'x>`.
I made that visitor call `liberate_late_bound_regions`, not sure if that's the right thing here or we need to do something else to replace these bound vars with placeholders. I'm not familiar with other code doing anything similar.. But the issue is indeed no longer ICEing.
Fixes#92954
r? `@jackh726`
since you last touched this code, feel free to reassign
Normalize field access types during borrowck
I think a normalize was just left out here, since we normalize analogously throughout this file.
Fixes#93141
Add preliminary support for inline assembly for msp430.
The `llvm_asm` macro was removed recently, and the MSP430 backend relies on inline assembly to build useful embedded apps. I conveniently "found" time to implement basic support for the new inline `asm` macro syntax with the help of `@Amanieu` :D.
In addition to tests in the compiler, I have tested this locally against deployed MSP430 code and have not found any noticeable differences in firmware operation or `objdump` disassemblies between the old `llvm_asm` and the new `asm` syntax.
rustc_lint: Some early linting refactorings
The first one removes and renames some fields and methods from `EarlyContext`.
The second one uses the set of registered tools (for tool attributes and tool lints) in a more centralized way.
The third one removes creation of a fake `ast::Crate` from `fn pre_expansion_lint`.
Pre-expansion linting is done with per-module granularity on freshly loaded modules, and it previously synthesized an `ast::Crate` to visit non-root modules, now they are visited as modules.
The node ID used for pre-expansion linting is also made more precise (the loaded module ID is used).
