Move Error trait into core
This PR moves the error trait from the standard library into a new unstable `error` module within the core library. The goal of this PR is to help unify error reporting across the std and no_std ecosystems, as well as open the door to integrating the error trait into the panic reporting system when reporting panics whose source is an errors (such as via `expect`).
This PR is a rewrite of https://github.com/rust-lang/rust/pull/90328 using new compiler features that have been added to support error in core.
While the `provide_*` methods already short-circuit when a value has
been provided, there are times where an expensive computation is
needed to determine if the `provide_*` method can even be called.
Use pointer `is_aligned*` methods
This PR replaces some manual alignment checks with calls to `pointer::{is_aligned, is_aligned_to}` and removes a useless pointer cast.
r? `@scottmcm`
_split off from #100746_
Std module docs improvements
My primary goal is to create a cleaner separation between primitive types and primitive type helper modules (fixes#92777). I also changed a few header lines in other top-level std modules (seen at https://doc.rust-lang.org/std/) for consistency.
Some conventions used/established:
* "The \`Box\<T>` type for heap allocation." - if a module mainly provides a single type, name it and summarize its purpose in the module header
* "Utilities for the _ primitive type." - this wording is used for the header of helper modules
* Documentation for primitive types themselves are removed from helper modules
* provided-by-core functionality of primitive types is documented in the primitive type instead of the helper module (such as the "Iteration" section in the slice docs)
I wonder if some content in `std::ptr` should be in `pointer` but I did not address this.
Replace most uses of `pointer::offset` with `add` and `sub`
As PR title says, it replaces `pointer::offset` in compiler and standard library with `pointer::add` and `pointer::sub`. This generally makes code cleaner, easier to grasp and removes (or, well, hides) integer casts.
This is generally trivially correct, `.offset(-constant)` is just `.sub(constant)`, `.offset(usized as isize)` is just `.add(usized)`, etc. However in some cases we need to be careful with signs of things.
r? ````@scottmcm````
_split off from #100746_
Make some docs nicer wrt pointer offsets
This PR replaces `pointer::offset` with `pointer::add` and similarly `.cast().wrapping_add().cast()` with `.wrapping_byte_add()` **in docs**.
r? ``````@scottmcm``````
_split off from #100746_
Clamp Function for f32 and f64
I thought the clamp function could use a little improvement for readability purposes. The function now returns early in order to skip the extra bound checks.
If there was a reason for binding `self` to `x` or if this code is incorrect, please correct me :)
This commit adds the following functions all of which have a signature
`pointer, usize -> pointer`:
- `<*mut T>::mask`
- `<*const T>::mask`
- `intrinsics::ptr_mask`
These functions are equivalent to `.map_addr(|a| a & mask)` but they
utilize `llvm.ptrmask` llvm intrinsic.
*masks your pointers*
Fix trailing space showing up in example
The current text is rendered as: U+005B ..= U+0060 ``[ \ ] ^ _ ` ``, or (**note the final space!**)
This patch changes that to render as: U+005B ..= U+0060 `` [ \ ] ^ _ ` ``, or (**note no final space!**)
The reason for that, is that CommonMark has a solution for starting or ending inline code with a backtick/grave accent: padding both sides with a space, makes that padding disappear.
Expose `Utf8Lossy` as `Utf8Chunks`
This PR changes the feature for `Utf8Lossy` from `str_internals` to `utf8_lossy` and improves the API. This is done to eventually expose the API as stable.
Proposal: rust-lang/libs-team#54
Tracking Issue: #99543
Refactor iteration logic in the `Flatten` and `FlatMap` iterators
The `Flatten` and `FlatMap` iterators both delegate to `FlattenCompat`:
```rust
struct FlattenCompat<I, U> {
iter: Fuse<I>,
frontiter: Option<U>,
backiter: Option<U>,
}
```
Every individual iterator method that `FlattenCompat` implements needs to carefully manage this state, checking whether the `frontiter` and `backiter` are present, and storing the current iterator appropriately if iteration is aborted. This has led to methods such as `next`, `advance_by`, and `try_fold` all having similar code for managing the iterator's state.
I have extracted this common logic of iterating the inner iterators with the option to exit early into a `iter_try_fold` method:
```rust
impl<I, U> FlattenCompat<I, U>
where
I: Iterator<Item: IntoIterator<IntoIter = U>>,
{
fn iter_try_fold<Acc, Fold, R>(&mut self, acc: Acc, fold: Fold) -> R
where
Fold: FnMut(Acc, &mut U) -> R,
R: Try<Output = Acc>,
{ ... }
}
```
It passes each of the inner iterators to the given function as long as it keep succeeding. It takes care of managing `FlattenCompat`'s state, so that the actual `Iterator` methods don't need to. The resulting code that makes use of this abstraction is much more straightforward:
```rust
fn next(&mut self) -> Option<U::Item> {
#[inline]
fn next<U: Iterator>((): (), iter: &mut U) -> ControlFlow<U::Item> {
match iter.next() {
None => ControlFlow::CONTINUE,
Some(x) => ControlFlow::Break(x),
}
}
self.iter_try_fold((), next).break_value()
}
```
Note that despite being implemented in terms of `iter_try_fold`, `next` is still able to benefit from `U`'s `next` method. It therefore does not take the performance hit that implementing `next` directly in terms of `Self::try_fold` causes (in some benchmarks).
This PR also adds `iter_try_rfold` which captures the shared logic of `try_rfold` and `advance_back_by`, as well as `iter_fold` and `iter_rfold` for folding without early exits (used by `fold`, `rfold`, `count`, and `last`).
Benchmark results:
```
before after
bench_flat_map_sum 423,255 ns/iter 414,338 ns/iter
bench_flat_map_ref_sum 1,942,139 ns/iter 2,216,643 ns/iter
bench_flat_map_chain_sum 1,616,840 ns/iter 1,246,445 ns/iter
bench_flat_map_chain_ref_sum 4,348,110 ns/iter 3,574,775 ns/iter
bench_flat_map_chain_option_sum 780,037 ns/iter 780,679 ns/iter
bench_flat_map_chain_option_ref_sum 2,056,458 ns/iter 834,932 ns/iter
```
I added the last two benchmarks specifically to demonstrate an extreme case where `FlatMap::next` can benefit from custom internal iteration of the outer iterator, so take it with a grain of salt. We should probably do a perf run to see if the changes to `next` are worth it in practice.
I noticed in the MIR for <https://play.rust-lang.org/?version=nightly&mode=release&edition=2021&gist=67097e0494363ee27421a4e3bdfaf513> that it's inlined most stuff
```
scope 5 (inlined <Result<i32, u32> as Try>::branch)
```
```
scope 8 (inlined <Result<i32, u32> as Try>::from_output)
```
But yet the do-nothing `from` call was still there:
```
_17 = <u32 as From<u32>>::from(move _18) -> bb9;
```
So let's give this a try and see what perf has to say.
Don't derive `PartialEq::ne`.
Currently we skip deriving `PartialEq::ne` for C-like (fieldless) enums
and empty structs, thus reyling on the default `ne`. This behaviour is
unnecessarily conservative, because the `PartialEq` docs say this:
> Implementations must ensure that eq and ne are consistent with each other:
>
> `a != b` if and only if `!(a == b)` (ensured by the default
> implementation).
This means that the default implementation (`!(a == b)`) is always good
enough. So this commit changes things such that `ne` is never derived.
The motivation for this change is that not deriving `ne` reduces compile
times and binary sizes.
Observable behaviour may change if a user has defined a type `A` with an
inconsistent `PartialEq` and then defines a type `B` that contains an
`A` and also derives `PartialEq`. Such code is already buggy and
preserving bug-for-bug compatibility isn't necessary.
Two side-effects of the change:
- There is only one error message produced for types where `PartialEq`
cannot be derived, instead of two.
- For coverage reports, some warnings about generated `ne` methods not
being executed have disappeared.
Both side-effects seem fine, and possibly preferable.
Simple Clamp Function
I thought this was more robust and easier to read. I also allowed this function to return early in order to skip the extra bound check (I'm sure the difference is negligible). I'm not sure if there was a reason for binding `self` to `x`; if so, please correct me.
Simple Clamp Function for f64
I thought this was more robust and easier to read. I also allowed this function to return early in order to skip the extra bound check (I'm sure the difference is negligible). I'm not sure if there was a reason for binding `self` to `x`; if so, please correct me.
Floating point clamp test
f32 clamp using mut self
f64 clamp using mut self
Update library/core/src/num/f32.rs
Update f64.rs
Update x86_64-floating-point-clamp.rs
Update src/test/assembly/x86_64-floating-point-clamp.rs
Update x86_64-floating-point-clamp.rs
Co-Authored-By: scottmcm <scottmcm@users.noreply.github.com>
Update the minimum external LLVM to 13
With this change, we'll have stable support for LLVM 13 through 15 (pending release).
For reference, the previous increase to LLVM 12 was #90175.
r? `@nagisa`
The current text is rendered as: U+005B ..= U+0060 ``[ \ ] ^ _ ` ``, or.
This patch changes that to render as: U+005B ..= U+0060 `` [ \ ] ^ _ ` ``, or
The reason for that, is that CommonMark has a solution for starting or ending inline code with a backtick/grave accent: padding both sides with a space, makes that padding disappear.
Add `Iterator::array_chunks` (take N+1)
A revival of https://github.com/rust-lang/rust/pull/92393.
r? `@Mark-Simulacrum`
cc `@rossmacarthur` `@scottmcm` `@the8472`
I've tried to address most of the review comments on the previous attempt. The only thing I didn't address is `try_fold` implementation, I've left the "custom" one for now, not sure what exactly should it use.
