Recover error strings on Unix from_lossy_utf8
Some language settings can result in unreliable UTF-8 being produced.
This can result in failing to emit the error string, panicking instead.
from_lossy_utf8 allows us to assume these strings usually will be fine.
This fixes rust-lang#99535.
Remove use of `io::ErrorKind::Other` in std
The documentation states that this `ErrorKind` is not used by the standard library. Instead, `io::ErrorKind::Uncategorized` should be used.
The two instances are in the unstable API [linux_pidfd](https://github.com/rust-lang/rust/issues/82971).
std: use `sync::RwLock` for internal statics
Since `sync::RwLock` is now `const`-constructible, it can be used for internal statics, removing the need for `sys_common::StaticRwLock`. This adds some extra allocations on platforms which need to box their locks (currently SGX and some UNIX), but these will become unnecessary with the lock improvements tracked in #93740.
Make `ReentrantMutex` movable and `const`
As `MovableMutex` is now `const`, it can be used to simplify the implementation and interface of the internal reentrant mutex type. Consequently, the standard error stream does not need to be wrapped in `OnceLock` and `OnceLock::get_or_init_pin()` can be removed.
Support `#[unix_sigpipe = "inherit|sig_dfl"]` on `fn main()` to prevent ignoring `SIGPIPE`
When enabled, programs don't have to explicitly handle `ErrorKind::BrokenPipe` any longer. Currently, the program
```rust
fn main() { loop { println!("hello world"); } }
```
will print an error if used with a short-lived pipe, e.g.
% ./main | head -n 1
hello world
thread 'main' panicked at 'failed printing to stdout: Broken pipe (os error 32)', library/std/src/io/stdio.rs:1016:9
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
by enabling `#[unix_sigpipe = "sig_dfl"]` like this
```rust
#![feature(unix_sigpipe)]
#[unix_sigpipe = "sig_dfl"]
fn main() { loop { println!("hello world"); } }
```
there is no error, because `SIGPIPE` will not be ignored and thus the program will be killed appropriately:
% ./main | head -n 1
hello world
The current libstd behaviour of ignoring `SIGPIPE` before `fn main()` can be explicitly requested by using `#[unix_sigpipe = "sig_ign"]`.
With `#[unix_sigpipe = "inherit"]`, no change at all is made to `SIGPIPE`, which typically means the behaviour will be the same as `#[unix_sigpipe = "sig_dfl"]`.
See https://github.com/rust-lang/rust/issues/62569 and referenced issues for discussions regarding the `SIGPIPE` problem itself
See the [this](https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Proposal.3A.20First.20step.20towards.20solving.20the.20SIGPIPE.20problem) Zulip topic for more discussions, including about this PR.
Tracking issue: https://github.com/rust-lang/rust/issues/97889
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Use getentropy when possible on all Apple platforms
As the current code comments say, `SecRandomCopyBytes` is very heavyweight (regardless of purpose) compared to just asking the kernel directly for bytes from its own CSPRNG. We were not previously making an attempt to use the more efficient `getentropy` call on other Apple targets, instead solely using it on macOS. As the function is available on newer versions of Apple's different OSes, this changes the random filling to always attempt it first everywhere, only falling back to the less ideal alternatives after. This also cleans up the multiple Apple `imp` blocks into one.
It also should give a perf improvement, even if its likely unnoticeably small.
Refed XCode header for `getentropy` in the SDK:
```h
int getentropy(void* buffer, size_t size) __OSX_AVAILABLE(10.12) __IOS_AVAILABLE(10.0) __TVOS_AVAILABLE(10.0) __WATCHOS_AVAILABLE(3.0);
```
r? ``@thomcc``
Use posix_spawn for absolute paths on macOS
Currently, on macOS, Rust never uses the fast posix_spawn path if a
directory change is requested, due to a bug in Apple's libc. However, the
bug is only triggered if the program is a relative path.
This PR makes it so that the fast path continues to work if the program
is an absolute path or a lone filename.
This was an alternative proposed in https://github.com/rust-lang/rust/pull/80537#issue-776674009, and it makes a measurable performance difference in some of my code that spawns thousands of processes.
Currently, on macOS, Rust never uses the fast posix_spawn path if a
directory change is requested due to a bug in Apple's libc. However, the
bug is only triggered if the program is a relative path.
This PR makes it so that the fast path continues to work if the program
is an absolute path or a lone filename.
This was an alternative proposed in
https://github.com/rust-lang/rust/pull/80537#issue-776674009, and it
makes a measurable performance difference in some of my code that spawns
thousands of processes.
This makes it possible to instruct libstd to never touch the signal
handler for `SIGPIPE`, which makes programs pipeable by default (e.g.
with `./your-program | head -n 1`) without `ErrorKind::BrokenPipe`
errors.
std::io: migrate ReadBuf to BorrowBuf/BorrowCursor
This PR replaces `ReadBuf` (used by the `Read::read_buf` family of methods) with `BorrowBuf` and `BorrowCursor`.
The general idea is to split `ReadBuf` because its API is large and confusing. `BorrowBuf` represents a borrowed buffer which is mostly read-only and (other than for construction) deals only with filled vs unfilled segments. a `BorrowCursor` is a mostly write-only view of the unfilled part of a `BorrowBuf` which distinguishes between initialized and uninitialized segments. For `Read::read_buf`, the caller would create a `BorrowBuf`, then pass a `BorrowCursor` to `read_buf`.
In addition to the major API split, I've made the following smaller changes:
* Removed some methods entirely from the API (mostly the functionality can be replicated with two calls rather than a single one)
* Unified naming, e.g., by replacing initialized with init and assume_init with set_init
* Added an easy way to get the number of bytes written to a cursor (`written` method)
As well as simplifying the API (IMO), this approach has the following advantages:
* Since we pass the cursor by value, we remove the 'unsoundness footgun' where a malicious `read_buf` could swap out the `ReadBuf`.
* Since `read_buf` cannot write into the filled part of the buffer, we prevent the filled part shrinking or changing which could cause underflow for the caller or unexpected behaviour.
## Outline
```rust
pub struct BorrowBuf<'a>
impl Debug for BorrowBuf<'_>
impl<'a> From<&'a mut [u8]> for BorrowBuf<'a>
impl<'a> From<&'a mut [MaybeUninit<u8>]> for BorrowBuf<'a>
impl<'a> BorrowBuf<'a> {
pub fn capacity(&self) -> usize
pub fn len(&self) -> usize
pub fn init_len(&self) -> usize
pub fn filled(&self) -> &[u8]
pub fn unfilled<'this>(&'this mut self) -> BorrowCursor<'this, 'a>
pub fn clear(&mut self) -> &mut Self
pub unsafe fn set_init(&mut self, n: usize) -> &mut Self
}
pub struct BorrowCursor<'buf, 'data>
impl<'buf, 'data> BorrowCursor<'buf, 'data> {
pub fn clone<'this>(&'this mut self) -> BorrowCursor<'this, 'data>
pub fn capacity(&self) -> usize
pub fn written(&self) -> usize
pub fn init_ref(&self) -> &[u8]
pub fn init_mut(&mut self) -> &mut [u8]
pub fn uninit_mut(&mut self) -> &mut [MaybeUninit<u8>]
pub unsafe fn as_mut(&mut self) -> &mut [MaybeUninit<u8>]
pub unsafe fn advance(&mut self, n: usize) -> &mut Self
pub fn ensure_init(&mut self) -> &mut Self
pub unsafe fn set_init(&mut self, n: usize) -> &mut Self
pub fn append(&mut self, buf: &[u8])
}
```
## TODO
* ~~Migrate non-unix libs and tests~~
* ~~Naming~~
* ~~`BorrowBuf` or `BorrowedBuf` or `SliceBuf`? (We might want an owned equivalent for the async IO traits)~~
* ~~Should we rename the `readbuf` module? We might keep the name indicate it includes both the buf and cursor variations and someday the owned version too. Or we could change it. It is not publicly exposed, so it is not that important~~.
* ~~`read_buf` method: we read into the cursor now, so the `_buf` suffix is a bit weird.~~
* ~~Documentation~~
* Tests are incomplete (I adjusted existing tests, but did not add new ones).
cc https://github.com/rust-lang/rust/issues/78485, https://github.com/rust-lang/rust/issues/94741
supersedes: https://github.com/rust-lang/rust/pull/95770, https://github.com/rust-lang/rust/pull/93359fixes#93305
Align android `sigaddset` impl with the reference impl from Bionic
In https://github.com/rust-lang/rust/pull/100737 I noticed we were treating the sigset_t as an array of bytes, while referencing code from android (ad8dcd6023/libc/include/android/legacy_signal_inlines.h) which treats it as an array of unsigned long.
That said, the behavior difference is so subtle here that it's not hard to see why nobody noticed. This fixes the implementation to be equivalent to the one in bionic.
Expose `Utf8Lossy` as `Utf8Chunks`
This PR changes the feature for `Utf8Lossy` from `str_internals` to `utf8_lossy` and improves the API. This is done to eventually expose the API as stable.
Proposal: rust-lang/libs-team#54
Tracking Issue: #99543
Fix HorizonOS regression in FileTimes
The changes in #98246 caused a regression for multiple Newlib-based systems. This is just a fix including HorizonOS to the list of targets which require a workaround.
``@AzureMarker`` ``@ian-h-chamberlain``
r? ``@nagisa``
promote debug_assert to assert when possible and useful
This PR fixed a very old issue https://github.com/rust-lang/rust/issues/94705 to clarify and improve the POSIX error checking, and some of the checks are skipped because can have no benefit, but I'm sure that this can open some interesting discussion.
Fixes https://github.com/rust-lang/rust/issues/94705
cc: `@tavianator`
cc: `@cuviper`
linux: Use `pthread_setname_np` instead of `prctl`
This function is available on Linux since glibc 2.12, musl 1.1.16, and
uClibc 1.0.20. The main advantage over `prctl` is that it properly
represents the pointer argument, rather than a multi-purpose `long`,
so we're better representing strict provenance (#95496).
This function is available on Linux since glibc 2.12, musl 1.1.16, and
uClibc 1.0.20. The main advantage over `prctl` is that it properly
represents the pointer argument, rather than a multi-purpose `long`,
so we're better representing strict provenance (#95496).
