MIR required_consts, mentioned_items: ensure we do not forget to fill these lists
Bodies initially get created with empty required_consts and mentioned_items, but at some point those should be filled. Make sure we notice when that is forgotten.
raw_eq: using it on bytes with provenance is not UB (outside const-eval)
The current behavior of raw_eq violates provenance monotonicity. See https://github.com/rust-lang/rust/pull/124921 for an explanation of provenance monotonicity. It is violated in raw_eq because comparing bytes without provenance is well-defined, but adding provenance makes the operation UB.
So remove the no-provenance requirement from raw_eq. However, the requirement stays in-place for compile-time invocations of raw_eq, that indeed cannot deal with provenance.
Cc `@rust-lang/opsem`
Better handle suggestions for the already present code and fix some suggestions
When a suggestion part is for code that is already present, skip it. If all the suggestion parts for a suggestion are for code that is already there, do not emit the suggestion.
Fix two suggestions that treat `span_suggestion` as if it were `span_help`.
```
error[E0790]: cannot call associated function on trait without specifying the corresponding `impl` type
--> $DIR/E0283.rs:30:21
|
LL | fn create() -> u32;
| ------------------- `Coroutine::create` defined here
...
LL | let cont: u32 = Coroutine::create();
| ^^^^^^^^^^^^^^^^^^^ cannot call associated function of trait
|
help: use a fully-qualified path to a specific available implementation
|
LL | let cont: u32 = <Impl as Coroutine>::create();
| ++++++++ +
LL | let cont: u32 = <AnotherImpl as Coroutine>::create();
| +++++++++++++++ +
```
Since LLVM <https://reviews.llvm.org/D99439> (4c7f820b2b20, "Update
@llvm.powi to handle different int sizes for the exponent"), the size of
the integer can be specified for the `powi` intrinsic. Make use of this
so it is more obvious that integer size is consistent across all float
types.
This feature is available since LLVM 13 (October 2021). Based on
bootstrap we currently support >= 17.0, so there should be no support
problems.
When a suggestion part is for already present code, do not highlight it. If after that there are no highlights left, do not show the suggestion at all.
Fix clippy lint suggestion incorrectly treated as `span_help`.
interpret: on a signed deref check, mention the right pointer in the error
When a negative offset (like `ptr.offset(-10)`) goes out-of-bounds, we currently show an error saying that we expect the *resulting* pointer to be inbounds for 10 bytes. That's confusing, so this PR makes it so that instead we say that we expect the *original* pointer `ptr` to have 10 bytes *to the left*.
I also realized I can simplify the pointer arithmetic logic and handling of "staying inbounds of a target `usize`" quite a bit; the second commit does that.
More unsafe attr verification
This code denies unsafe on attributes such as `#[test]` and `#[ignore]`, while also changing the `MetaItem` parsing so `unsafe` in args like `#[allow(unsafe(dead_code))]` is not accidentally allowed.
Tracking:
- https://github.com/rust-lang/rust/issues/123757
When collecting tokens there are two kinds of range:
- a range relative to the parser's full token stream (which we get when
we are parsing);
- a range relative to a single AST node's token stream (which we use
within `LazyAttrTokenStreamImpl` when replacing tokens).
These are currently both represented with `Range<u32>` and it's easy to
mix them up -- until now I hadn't properly understood the difference.
This commit introduces `ParserRange` and `NodeRange` to distinguish
them. This also requires splitting `ReplaceRange` in two, giving the new
types `ParserReplacement` and `NodeReplacement`. (These latter two names
reduce the overloading of the word "range".)
The commit also rewrites some comments to be clearer.
The end result is a little more verbose, but much clearer.
Emit an error if `#[optimize]` is applied to an incompatible item
#54882
The RFC specifies that this should emit a lint. I used the same allow logic as the `coverage` attribute (also allowing modules and impl blocks) - this should possibly be changed depending on if it's decided to allow 'propogation' of the attribute.
Create COFF archives for non-LLVM backends
`ar_archive_writer` now supports creating COFF archives, so enable them for the non-LLVM backends when requested.
r? ``@bjorn3``
Rollup of 7 pull requests
Successful merges:
- #123813 (Add `REDUNDANT_IMPORTS` lint for new redundant import detection)
- #126697 ([RFC] mbe: consider the `_` in 2024 an expression)
- #127159 (match lowering: Hide `Candidate` from outside the lowering algorithm)
- #128244 (Peel off explicit (or implicit) deref before suggesting clone on move error in borrowck, remove some hacks)
- #128431 (Add myself as VxWorks target maintainer for reference)
- #128438 (Add special-case for [T, 0] in dropck_outlives)
- #128457 (Fix docs for OnceLock::get_mut_or_init)
r? `@ghost`
`@rustbot` modify labels: rollup
derive(SmartPointer): require pointee to be maybe sized
cc ``@Darksonn``
So `#[pointee]` has to be `?Sized` in order for deriving `SmartPointer` to be meaningful.
cc ``@compiler-errors`` for suggestions in #127681
Properly mark loop as diverging if it has no breaks
Due to specifics about the desugaring of the `.await` operator, HIR typeck doesn't recognize that `.await`ing an `impl Future<Output = !>` will diverge in the same way as calling a `fn() -> !`.
This is because the await operator desugars to approximately:
```rust
loop {
match future.poll(...) {
Poll::Ready(x) => break x,
Poll::Pending => {}
}
}
```
We know that the value of `x` is `!`, however since `break` is a coercion site, we coerce `!` to some `?0` (the type of the loop expression). Then since the type of the `loop {...}` expression is `?0`, we will not detect the loop as diverging like we do with other expressions that evaluate to `!`:
0b5eb7ba7b/compiler/rustc_hir_typeck/src/expr.rs (L240-L243)
We can technically fix this in two ways:
1. Make coercion of loop exprs more eagerly result in a type of `!` when the only break expressions have type `!`.
2. Make loops understand that all of that if they have only diverging break values, then the loop diverges as well.
(1.) likely has negative effects on inference, and seems like a weird special case to drill into coercion. However, it turns out that (2.) is very easy to implement, we already record whether a loop has any break expressions, and when we do so, we actually skip over any break expressions with diverging values!:
0b5eb7ba7b/compiler/rustc_hir_typeck/src/expr.rs (L713-L716)
Thus, we can consider the loop as diverging if we see that it has no breaks, which is the change implemented in this PR.
This is not usually a problem in regular code for two reasons:
1. In regular code, we already mark `break diverging()` as unreachable if `diverging()` is unreachable. We don't do this for `.await`, since we suppress unreachable errors within `.await` (#64930). Un-suppressing this code will result in spurious unreachable expression errors pointing to internal await machinery.
3. In loops that truly have no breaks (e.g. `loop {}`), we already evaluate the type of the loop to `!`, so this special case is kinda moot. This only affects loops that have `break`s with values of type `!`.
Thus, this seems like a change that may affect more code than just `.await`, but it likely does not in meaningful ways; if it does, it's certainly correct to apply.
Fixes#128434
Peel off explicit (or implicit) deref before suggesting clone on move error in borrowck, remove some hacks
Also remove a heck of a lot of weird hacks in `suggest_cloning` that I don't think we should have around.
I know this regresses tests, but I don't believe most of these suggestions were accurate, b/c:
1. They either produced type errors (e.g. turning `&x` into `x.clone()`)
2. They don't fix the issue
3. They fix the issue ostensibly, but introduce logic errors (e.g. cloning a `&mut Option<T>` to then `Option::take` out...)
Most of the suggestions are still wrong, but they're not particularly *less* wrong IMO.
Stacked on top of #128241, which is an "obviously worth landing" subset of this PR.
r? estebank
match lowering: Hide `Candidate` from outside the lowering algorithm
The internals of `Candidate` are tricky and a source of confusion. This PR makes it so we don't expose `Candidate`s outside the lowering algorithm. Now:
- false edges are handled in `lower_match_tree`;
- `lower_match_tree` takes a list of patterns as input;
- `lower_match_tree` returns a flat datastructure that contains only the necessary information.
r? ```@matthewjasper```
Add `REDUNDANT_IMPORTS` lint for new redundant import detection
Defaults to Allow for now. Stacked on #123744 to avoid merge conflict, but much easier to review all as one.
r? petrochenkov
Accelerate GVN a little
This PR addresses a few inefficiencies I've seen in callgrind profiles.
Commits are independent.
Only the first commit introduces a change in behaviour: we stop substituting some constant pointers. But we keep propagating their contents that have no provenance, so we don't lose much.
r? `@saethlin`
Rollup of 9 pull requests
Successful merges:
- #126454 (bump-stage0: use IndexMap for determinism)
- #127681 (derive(SmartPointer): rewrite bounds in where and generic bounds)
- #127830 (When an archive fails to build, print the path)
- #128151 (Structured suggestion for `extern crate foo` when `foo` isn't resolved in import)
- #128387 (More detailed note to deprecate ONCE_INIT)
- #128388 (Match LLVM ABI in `extern "C"` functions for `f128` on Windows)
- #128402 (Attribute checking simplifications)
- #128412 (Remove `crate_level_only` from `ELIDED_LIFETIMES_IN_PATHS`)
- #128430 (Use a separate pattern type for `rustc_pattern_analysis` diagnostics )
r? `@ghost`
`@rustbot` modify labels: rollup
Use a separate pattern type for `rustc_pattern_analysis` diagnostics
The pattern-analysis code needs to print patterns, as part of its user-visible diagnostics. But it never actually tries to print "real" patterns! Instead, it only ever prints synthetic patterns that it has reconstructed from its own internal represenations.
We can therefore simultaneously remove two obstacles to changing `thir::Pat`, by having the pattern-analysis code use its own dedicated type for building printable patterns, and then making `thir::Pat` not printable at all.
r? `@Nadrieril`
Remove `crate_level_only` from `ELIDED_LIFETIMES_IN_PATHS`
As far as I can tell, we provide the right node id to the `ELIDED_LIFETIMES_IN_PATHS` lint:
f8060d282d/compiler/rustc_resolve/src/late.rs (L2015-L2027)
So I've gone ahead and removed the restriction from this lint.
Attribute checking simplifications
remove an unused boolean and then merge two big matches into one
I was reviewing some attributes and realized we don't really check this list against the list of builtin attributes, so we "may" totally be missing some attributes that we should be checking (like the `coroutine` attribute, which you can just apply to random stuff)
```rust
#![feature(coroutines)]
#[coroutine]
struct Foo;
```
just compiles for example. Unless we check that the fallthrough match arm is never reached for builtin attributes, we're just going to keep forgetting to add them here, too. I can do that without the changes in this PR, but it seemed like a nice cleanup
Match LLVM ABI in `extern "C"` functions for `f128` on Windows
As MSVC doesn't support `_Float128`, x86-64 Windows doesn't have a defined ABI for `f128`. Currently, Rust will pass and return `f128` indirectly for `extern "C"` functions. This is inconsistent with LLVM, which passes and returns `f128` in XMM registers, meaning that e.g. the ABI of `extern "C"` compiler builtins won't match. This PR fixes this discrepancy by making the x86-64 Windows `extern "C"` ABI pass `f128` directly through to LLVM, so that Rust will follow whatever LLVM does. This still leaves the difference between LLVM and GCC (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=115054) but this PR is still an improvement as at least Rust is now consistent with it's primary codegen backend and compiler builtins from `compiler-builtins` will now work.
I've also fixed the x86-64 Windows `has_reliable_f16` match arm in `std` `build.rs` to refer to the correct target, and added an equivalent match arm to `has_reliable_f128` as the LLVM-GCC ABI difference affects both `f16` and `f128`.
Tracking issue: #116909
try-job: x86_64-msvc
try-job: x86_64-mingw
Structured suggestion for `extern crate foo` when `foo` isn't resolved in import
When encountering a name in an import that could have come from a crate that wasn't imported, use a structured suggestion to suggest `extern crate foo;` pointing at the right place in the crate.
When encountering `_` in an import, do not suggest `extern crate _;`.
```
error[E0432]: unresolved import `spam`
--> $DIR/import-from-missing-star-3.rs:2:9
|
LL | use spam::*;
| ^^^^ maybe a missing crate `spam`?
|
help: consider importing the `spam` crate
|
LL + extern crate spam;
|
```
When an archive fails to build, print the path
Currently the output on failure is as follows:
Compiling block-buffer v0.10.4
Compiling crypto-common v0.1.6
Compiling digest v0.10.7
Compiling sha2 v0.10.8
Compiling xz2 v0.1.7
error: failed to build archive: No such file or directory
error: could not compile `bootstrap` (lib) due to 1 previous error
Change this to print which file is being constructed, to give some hint about what is going on.
error: failed to build archive at `path/to/output`: No such file or directory
derive(SmartPointer): rewrite bounds in where and generic bounds
Fix#127647
Due to the `Unsize` bounds, we need to commute the bounds on the pointee type to the new self type.
cc ```@Darksonn```
