In the documentation comment for `std::str::rfind`, say "last" instead
of "rightmost" to describe the match that `rfind` finds. This follows the
spirit of #30459, for which `trim_left` and `trim_right` were replaced by
`trim_start` and `trim_end` to be more clear about how they work on
text which is displayed right-to-left.
Correct safety reasoning in `str::make_ascii_{lower,upper}case()`
I don't understand why the previous comment was used (it was inserted in #66564), but it doesn't explain why these functions are safe, only why `str::as_bytes{_mut}()` are safe.
If someone thinks they make perfect sense, I'm fine with closing this PR.
Bump bootstrap compiler to 1.61.0 beta
This PR bumps the bootstrap compiler to the 1.61.0 beta. The first commit changes the stage0 compiler, the second commit applies the "mechanical" changes and the third and fourth commits apply changes explained in the relevant comments.
r? `@Mark-Simulacrum`
This updates the standard library's documentation to use the new syntax. The
documentation is worthwhile to update as it should be more idiomatic
(particularly for features like this, which are nice for users to get acquainted
with). The general codebase is likely more hassle than benefit to update: it'll
hurt git blame, and generally updates can be done by folks updating the code if
(and when) that makes things more readable with the new format.
A few places in the compiler and library code are updated (mostly just due to
already having been done when this commit was first authored).
Add #[must_use] to remaining core functions
I've run out of compelling reasons to group functions together across crates so I'm just going to go module-by-module. This is everything remaining from the `core` crate.
Ignored by clippy for reasons unknown:
```rust
core::alloc::Layout unsafe fn for_value_raw<T: ?Sized>(t: *const T) -> Self;
core::any const fn type_name_of_val<T: ?Sized>(_val: &T) -> &'static str;
```
Ignored by clippy because of `mut`:
```rust
str fn split_at_mut(&mut self, mid: usize) -> (&mut str, &mut str);
```
<del>
Ignored by clippy presumably because a caller might want `f` called for side effects. That seems like a bad usage of `map` to me.
```rust
core::cell::Ref<'b, T> fn map<U: ?Sized, F>(orig: Ref<'b, T>, f: F) -> Ref<'b, T>;
core::cell::Ref<'b, T> fn map_split<U: ?Sized, V: ?Sized, F>(orig: Ref<'b, T>, f: F) -> (Ref<'b, U>, Ref<'b, V>);
```
</del>
Parent issue: #89692
r? ```@joshtriplett```
Add #[must_use] to expensive computations
The unifying theme for this commit is weak, admittedly. I put together a list of "expensive" functions when I originally proposed this whole effort, but nobody's cared about that criterion. Still, it's a decent way to bite off a not-too-big chunk of work.
Given the grab bag nature of this commit, the messages I used vary quite a bit. I'm open to wording changes.
For some reason clippy flagged four `BTreeSet` methods but didn't say boo about equivalent ones on `HashSet`. I stared at them for a while but I can't figure out the difference so I added the `HashSet` ones in.
```rust
// Flagged by clippy.
alloc::collections::btree_set::BTreeSet<T> fn difference<'a>(&'a self, other: &'a BTreeSet<T>) -> Difference<'a, T>;
alloc::collections::btree_set::BTreeSet<T> fn symmetric_difference<'a>(&'a self, other: &'a BTreeSet<T>) -> SymmetricDifference<'a, T>
alloc::collections::btree_set::BTreeSet<T> fn intersection<'a>(&'a self, other: &'a BTreeSet<T>) -> Intersection<'a, T>;
alloc::collections::btree_set::BTreeSet<T> fn union<'a>(&'a self, other: &'a BTreeSet<T>) -> Union<'a, T>;
// Ignored by clippy, but not by me.
std::collections::HashSet<T, S> fn difference<'a>(&'a self, other: &'a HashSet<T, S>) -> Difference<'a, T, S>;
std::collections::HashSet<T, S> fn symmetric_difference<'a>(&'a self, other: &'a HashSet<T, S>) -> SymmetricDifference<'a, T, S>
std::collections::HashSet<T, S> fn intersection<'a>(&'a self, other: &'a HashSet<T, S>) -> Intersection<'a, T, S>;
std::collections::HashSet<T, S> fn union<'a>(&'a self, other: &'a HashSet<T, S>) -> Union<'a, T, S>;
```
Parent issue: #89692
r? ```@joshtriplett```
The unifying theme for this commit is weak, admittedly. I put together a
list of "expensive" functions when I originally proposed this whole
effort, but nobody's cared about that criterion. Still, it's a decent
way to bite off a not-too-big chunk of work.
Given the grab bag nature of this commit, the messages I used vary quite
a bit.
Add #[must_use] to string/char transformation methods
These methods could be misconstrued as modifying their arguments instead of returning new values.
Where possible I made the note recommend a method that does mutate in place.
Parent issue: #89692
These methods could be misconstrued as modifying their arguments instead
of returning new values.
Where possible I made the note recommend a method that does mutate in
place.
Allow writing of incomplete UTF-8 sequences to the Windows console via stdout/stderr
# Problem
Writes of just an incomplete UTF-8 byte sequence (e.g. `b"\xC3"` or `b"\xF0\x9F"`) to stdout/stderr with a Windows console attached error with `io::ErrorKind::InvalidData, "Windows stdio in console mode does not support writing non-UTF-8 byte sequences"` even though further writes could complete the codepoint. This is currently a rare occurence since the [linewritershim](2c56ea38b0/library/std/src/io/buffered/linewritershim.rs) implementation flushes complete lines immediately and buffers up to 1024 bytes for incomplete lines. It can still happen as described in #83258.
The problem will become more pronounced once the developer can switch stdout/stderr from line-buffered to block-buffered or immediate when the changes in the "Switchable buffering for Stdout" pull request (#78515) get merged.
# Patch description
If there is at least one valid UTF-8 codepoint all valid UTF-8 is passed through to the extracted `write_valid_utf8_to_console()` fn. The new code only comes into play if `write()` is being passed a short byte slice comprising an incomplete UTF-8 codepoint. In this case up to three bytes are buffered in the `IncompleteUtf8` struct associated with `Stdout` / `Stderr`. The bytes are accepted one at a time. As soon as an error can be detected `io::ErrorKind::InvalidData, "Windows stdio in console mode does not support writing non-UTF-8 byte sequences"` is returned. Once a complete UTF-8 codepoint is received it is passed to the `write_valid_utf8_to_console()` and the buffer length is set to zero.
Calling `flush()` will neither error nor write anything if an incomplete codepoint is present in the buffer.
# Tests
Currently there are no Windows-specific tests for console writing code at all. Writing (regression) tests for this problem is a bit challenging since unit tests and UI tests don't run in a console and suddenly popping up another console window might be surprising to developers running the testsuite and it might not work at all in CI builds. To just test the new functionality in unit tests the code would need to be refactored. Some guidance on how to proceed would be appreciated.
# Public API changes
* `std::str::verifications::utf8_char_width()` would be exposed as `std::str::utf8_char_width()` behind the "str_internals" feature gate.
# Related issues
* Fixes#83258.
* PR #78515 will exacerbate the problem.
# Open questions
* Add tests?
* Squash into one commit with better commit message?
The libs-api team agrees to allow const_trait_impl to appear in the
standard library as long as stable code cannot be broken (they are
properly gated) this means if the compiler teams thinks it's okay, then
it's okay.
My priority on constifying would be:
1. Non-generic impls (e.g. Default) or generic impls with no
bounds
2. Generic functions with bounds (that use const impls)
3. Generic impls with bounds
4. Impls for traits with associated types
For people opening constification PRs: please cc me and/or oli-obk.
Fixes#83046
The program
fn main() {
println!("{:?}", '"');
println!("{:?}", "'");
}
would previously print
'\"'
"\'"
With this patch it now prints:
'"'
"'"
Stabilize split_inclusive
### Contents of this MR
This stabilises:
* `slice::split_inclusive`
* `slice::split_inclusive_mut`
* `str::split_inclusive`
Closes#72360.
### A possible concern
The proliferation of `split_*` methods is not particularly pretty. The existence of `split_inclusive` seems to invite the addition of `rsplit_inclusive`, `splitn_inclusive`, etc. We could instead have a more general API, along these kinds of lines maybe:
```
pub fn split_generic('a,P,H>(&'a self, pat: P, how: H) -> ...
where P: Pattern
where H: SplitHow;
pub fn split_generic_mut('a,P,H>(&'a mut self, pat: P, how: H) -> ...
where P: Pattern
where H: SplitHow;
trait SplitHow {
fn reverse(&self) -> bool;
fn inclusive -> bool;
fn limit(&self) -> Option<usize>;
}
pub struct SplitFwd;
...
pub struct SplitRevInclN(pub usize);
```
But maybe that is worse.
### Let us defer that? ###
This seems like a can of worms. I think we can defer opening it now; if and when we have something more general, these two methods can become convenience aliases. But I thought I would mention it so the lang API team can consider it and have an opinion.
Change:
```
`parse` can parse any type that...
```
to:
```
`parse` can parse into any type that...
```
Word `into` added to be more precise and in coherence with other parts of the doc.
