Stabilize `IpAddr::is_ipv4` and `is_ipv6` as const
Insta-stabilize the methods `is_ipv4` and `is_ipv6` of `std::net::IpAddr` as const, in the same way as [PR#76198](https://github.com/rust-lang/rust/pull/76198).
Possible because of the recent stabilization of const control flow.
Part of #76225 and #76205.
Insta-stabilize the methods `is_ipv4` and `is_ipv6` of `IpAddr`.
Possible because of the recent stabilization of const control flow.
Also adds a test for these methods in a const context.
warning: the operation is ineffective. Consider reducing it to
`self.segments()[0]`
--> library/std/src/net/ip.rs:1265:9
|
1265 | (self.segments()[0] & 0xffff) == 0xfe80
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(clippy::identity_op)]` on by default
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
warning: the operation is ineffective. Consider reducing it to
`self.segments()[1]`
--> library/std/src/net/ip.rs:1266:16
|
1266 | && (self.segments()[1] & 0xffff) == 0
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
warning: the operation is ineffective. Consider reducing it to
`self.segments()[2]`
--> library/std/src/net/ip.rs:1267:16
|
1267 | && (self.segments()[2] & 0xffff) == 0
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
warning: the operation is ineffective. Consider reducing it to
`self.segments()[3]`
--> library/std/src/net/ip.rs:1268:16
|
1268 | && (self.segments()[3] & 0xffff) == 0
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
Signed-off-by: wcampbell <wcampbell1995@gmail.com>
Make the following methods of `std::net::IpAddr` unstable const under the `const_ip` feature:
- `is_unspecified`
- `is_loopback`
- `is_global`
- `is_multicast`
Also adds a test for these methods in a const context.
Possible because these methods delegate to the inner `Ipv4Addr` or `Ipv6Addr`, which were made const, and the recent stabilization of const control flow.
Part of #76205
Convert many files to intra-doc links
Helps with https://github.com/rust-lang/rust/issues/75080
r? @poliorcetics
I recommend reviewing one commit at a time, but the diff is small enough you can do it all at once if you like :)
Make all methods of `std::net::Ipv4Addr` const
Make the following methods of `std::net::Ipv4Addr` unstable const under the `const_ipv4` feature:
- `octets`
- `is_loopback`
- `is_private`
- `is_link_local`
- `is_global` (unstable)
- `is_shared` (unstable)
- `is_ietf_protocol_assignment` (unstable)
- `is_benchmarking` (unstable)
- `is_reserved` (unstable)
- `is_multicast`
- `is_broadcast`
- `is_documentation`
- `to_ipv6_compatible`
- `to_ipv6_mapped`
This would make all methods of `Ipv6Addr` const.
Of these methods, `is_global`, `is_broadcast`, `to_ipv6_compatible`, and `to_ipv6_mapped` require a change in implementation.
Part of #76205
Makes the following methods of `std::net::Ipv4Addr` unstable const under the `const_ipv4` feature:
- `is_global`
- `is_reserved`
- `is_broadcast`
- `to_ipv6_compatible`
- `to_ipv6_mapped`
This results in all methods of `Ipv4Addr` being const.
Also adds tests for these methods in a const context.
Make the following methods of `std::net::Ipv6Addr` unstable const under the `const_ipv6` feature:
- `segments`
- `is_unspecified`
- `is_loopback`
- `is_global` (unstable)
- `is_unique_local`
- `is_unicast_link_local_strict`
- `is_documentation`
- `multicast_scope`
- `is_multicast`
- `to_ipv4_mapped`
- `to_ipv4`
Changed the implementation of `is_unspecified` and `is_loopback` to use a `match` instead of `==`.
Part of #76205
Constify the following methods of `std::net::Ipv4Addr`:
- `octets`
- `is_loopback`
- `is_private`
- `is_link_local`
- `is_shared`
- `is_ietf_protocol_assignment`
- `is_benchmarking`
- `is_multicast`
- `is_documentation`
Also insta-stabilizes these methods as const.
Possible because of the stabilization of const integer arithmetic and control flow.
Change Debug impl of SocketAddr and IpAddr to match their Display output
This has already been done for `SocketAddrV4`, `SocketAddrV6`, `IpAddrV4` and `IpAddrV6`. I don't see a point to keep the rather bad to read derived impl, especially so when pretty printing:
V4(
127.0.0.1
)
From the `Display`, one can easily and unambiguously see if it's V4 or V6. Two examples:
```
127.0.0.1:443
[2001:db8:85a3::8a2e:370:7334]:443
```
Luckily the docs explicitly state that `Debug` output is not stable and that it may be changed at any time.
Using `Display` as `Debug` is very convenient for configuration structs (e.g. for webservers) that often just have a `derive(Debug)` and are printed that way to the one starting the server.
Add Ipv6Addr::to_ipv4_mapped
* add Ipv6Addr::to_ipv4_mapped
* ~~deprecate Ipv4Addr::to_ipv6_compatible & Ipv6Addr::to_ipv4~~ reference: #75150
According to [IETF RFC 4291](https://tools.ietf.org/html/rfc4291#page-10), the "IPv4-Compatible IPv6 address" is deprecated.
> 2.5.5.1. IPv4-Compatible IPv6 Address
>
> The "IPv4-Compatible IPv6 address" was defined to assist in the IPv6
> transition. The format of the "IPv4-Compatible IPv6 address" is as
> follows:
>
> | 80 bits | 16 | 32 bits |
> +--------------------------------------+--------------------------+
> |0000..............................0000|0000| IPv4 address |
> +--------------------------------------+----+---------------------+
>
> Note: The IPv4 address used in the "IPv4-Compatible IPv6 address"
> must be a globally-unique IPv4 unicast address.
>
> The "IPv4-Compatible IPv6 address" is now deprecated because the
> current IPv6 transition mechanisms no longer use these addresses.
> New or updated implementations are not required to support this
> address type.
And the current implementation of `Ipv4Addr::to_ipv6_compatible`is incorrect: it does not check whether the IPv4 address is a globally-unique IPv4 unicast address.
Please let me know if there are any issues with this pull request.
This has already been done for `SocketAddrV4`, `SocketAddrV6`,
`IpAddrV4` and `IpAddrV6`. I don't see a point to keep the rather bad
to read derived impl, especially when pretty printing:
V4(
127.0.0.1
)
From the `Display`, one can easily and unambiguously see if it's V4 or
V6. Using `Display` as `Debug` is very convenient for configuration
structs (e.g. for webservers) that often just have a `derive(Debug)`
and are printed that way to the user.
