std: fix `readdir` errors for solaris
A `NULL` from `readdir` could be the end of stream or an error. The only
way to know is to check `errno`, so it must be set to a known value first,
like a 0 that POSIX will never use.
This currently only matters for solaris targets, as the other unix platforms
are using `readdir_r` with a direct error return indication. However, this is
getting deprecated (#34668) so they should all eventually switch to `readdir`.
This PR adds `set_errno`, uses it to clear the value before calling `readdir`,
then checks it again after to see the reason for a `NULL`. A few other small
fixes are included just to get solaris compiling at all.
I couldn't get cross-compilation completely going, so I don't have a good way
to test this beyond a smoke-test cargo build of std. I'd appreciate input from
someone more familiar with solaris -- cc @nbaksalyar?
A `NULL` from `readdir` could be the end of stream or an error. The
only way to know is to check `errno`, so it must be set to a known value
first, like a 0 that POSIX will never use.
This patch adds `set_errno`, uses it to clear the value before calling
`readdir`, then checks it again after to see the reason for a `NULL`.
The `use ffi::CStr` in `unix/thread.rs` was previously guarded, but now
all platforms need it for `Thread::set_name()`. Newlib and Solaris do
nothing here, as they have no way to set a thread name, but they still
define the same method signature.
Although the set of APIs being stabilized this release is relatively small, the
trains keep going! Listed below are the APIs in the standard library which have
either transitioned from unstable to stable or those from unstable to
deprecated.
Stable
* `BTreeMap::{append, split_off}`
* `BTreeSet::{append, split_off}`
* `Cell::get_mut`
* `RefCell::get_mut`
* `BinaryHeap::append`
* `{f32, f64}::{to_degrees, to_radians}` - libcore stabilizations mirroring past
libstd stabilizations
* `Iterator::sum`
* `Iterator::product`
Deprecated
* `{f32, f64}::next_after`
* `{f32, f64}::integer_decode`
* `{f32, f64}::ldexp`
* `{f32, f64}::frexp`
* `num::One`
* `num::Zero`
Added APIs (all unstable)
* `iter::Sum`
* `iter::Product`
* `iter::Step` - a few methods were added to accomodate deprecation of One/Zero
Removed APIs
* `From<Range<T>> for RangeInclusive<T>` - everything about `RangeInclusive` is
unstable
Closes#27739Closes#27752Closes#32526Closes#33444Closes#34152
cc #34529 (new tracking issue)
Don't ignore errors of syscalls in std::sys::unix::fd
If any of these syscalls fail, it indicates a programmer error that
should not be silently ignored.
std: Fix up stabilization discrepancies
* Remove the deprecated `CharRange` type which was forgotten to be removed
awhile back.
* Stabilize the `os::$platform::raw::pthread_t` type which was intended to be
stabilized as part of #32804
* Remove the deprecated `CharRange` type which was forgotten to be removed
awhile back.
* Stabilize the `os::$platform::raw::pthread_t` type which was intended to be
stabilized as part of #32804
The only applies to pthread mutexes. We solve this by creating the
mutex with the PTHREAD_MUTEX_NORMAL type, which guarantees that
re-locking from the same thread will deadlock.
rustc: Implement custom panic runtimes
This commit is an implementation of [RFC 1513] which allows applications to
alter the behavior of panics at compile time. A new compiler flag, `-C panic`,
is added and accepts the values `unwind` or `panic`, with the default being
`unwind`. This model affects how code is generated for the local crate, skipping
generation of landing pads with `-C panic=abort`.
[RFC 1513]: https://github.com/rust-lang/rfcs/blob/master/text/1513-less-unwinding.md
Panic implementations are then provided by crates tagged with
`#![panic_runtime]` and lazily required by crates with
`#![needs_panic_runtime]`. The panic strategy (`-C panic` value) of the panic
runtime must match the final product, and if the panic strategy is not `abort`
then the entire DAG must have the same panic strategy.
With the `-C panic=abort` strategy, users can expect a stable method to disable
generation of landing pads, improving optimization in niche scenarios,
decreasing compile time, and decreasing output binary size. With the `-C
panic=unwind` strategy users can expect the existing ability to isolate failure
in Rust code from the outside world.
Organizationally, this commit dismantles the `sys_common::unwind` module in
favor of some bits moving part of it to `libpanic_unwind` and the rest into the
`panicking` module in libstd. The custom panic runtime support is pretty similar
to the custom allocator support with the only major difference being how the
panic runtime is injected (takes the `-C panic` flag into account).
Closes#32837
std: Allow creating ExitStatus from raw values
Sometimes a process may be waited on externally from the standard library, in
which case it can be useful to create a raw `ExitStatus` structure to return.
This commit extends the existing Unix `ExitStatusExt` extension trait and adds a
new Windows-specific `ExitStatusExt` extension trait to do this. The methods are
currently called `ExitStatus::from_raw`.
cc #32713
This commit is an implementation of [RFC 1513] which allows applications to
alter the behavior of panics at compile time. A new compiler flag, `-C panic`,
is added and accepts the values `unwind` or `panic`, with the default being
`unwind`. This model affects how code is generated for the local crate, skipping
generation of landing pads with `-C panic=abort`.
[RFC 1513]: https://github.com/rust-lang/rfcs/blob/master/text/1513-less-unwinding.md
Panic implementations are then provided by crates tagged with
`#![panic_runtime]` and lazily required by crates with
`#![needs_panic_runtime]`. The panic strategy (`-C panic` value) of the panic
runtime must match the final product, and if the panic strategy is not `abort`
then the entire DAG must have the same panic strategy.
With the `-C panic=abort` strategy, users can expect a stable method to disable
generation of landing pads, improving optimization in niche scenarios,
decreasing compile time, and decreasing output binary size. With the `-C
panic=unwind` strategy users can expect the existing ability to isolate failure
in Rust code from the outside world.
Organizationally, this commit dismantles the `sys_common::unwind` module in
favor of some bits moving part of it to `libpanic_unwind` and the rest into the
`panicking` module in libstd. The custom panic runtime support is pretty similar
to the custom allocator support with the only major difference being how the
panic runtime is injected (takes the `-C panic` flag into account).
rand: don't block before random pool is initialized
If we attempt a read with getrandom() on Linux the syscall can block
before the random pool is initialized unless the GRND_NONBLOCK flag is
passed. This flag causes getrandom() to instead return EAGAIN while the
pool is uninitialized. To avoid downstream users of crate or std
functionality that have no ability to avoid this blocking behavior this
change causes Rust to read bytes from /dev/urandom while getrandom()
would block and once getrandom() is available to use that. Fixes#32953.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
The Gecko folks currently use Android API level 9 for their builds, so they're
requesting that we move back our minimum supported API level from 18 to 9. Turns
out, ABI-wise at least, there's not that many changes we need to take care of.
The `ftruncate64` API appeared in android-12 and the `log2` and `log2f` APIs
appeared in android-18. We can have a simple shim for `ftruncate64` which falls
back on `ftruncate` and the `log2` function can be approximated with just
`ln(f) / ln(2)`.
This should at least get the standard library building on API level 9, although
the tests aren't quite happening there just yet. As we seem to be growing a
number of Android compatibility shims, they're now centralized in a common
`sys::android` module.
Sometimes a process may be waited on externally from the standard library, in
which case it can be useful to create a raw `ExitStatus` structure to return.
This commit extends the existing Unix `ExitStatusExt` extension trait and adds a
new Windows-specific `ExitStatusExt` extension trait to do this. The methods are
currently called `ExitStatus::from_raw`.
cc #32713
Add some comments so that people know why we are performing a fallback
from getrandom() and what that fallback aims to achieve.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
If we attempt a read with getrandom() on Linux the syscall can block
before the random pool is initialized unless the GRND_NONBLOCK flag is
passed. This flag causes getrandom() to instead return EAGAIN while the
pool is uninitialized. To avoid downstream users of crate or std
functionality that have no ability to avoid this blocking behavior this
change causes Rust to read bytes from /dev/urandom while getrandom()
would block and once getrandom() is available to use that. Fixes#32953.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
This commit applies all stabilizations, renamings, and deprecations that the
library team has decided on for the upcoming 1.9 release. All tracking issues
have gone through a cycle-long "final comment period" and the specific APIs
stabilized/deprecated are:
Stable
* `std::panic`
* `std::panic::catch_unwind` (renamed from `recover`)
* `std::panic::resume_unwind` (renamed from `propagate`)
* `std::panic::AssertUnwindSafe` (renamed from `AssertRecoverSafe`)
* `std::panic::UnwindSafe` (renamed from `RecoverSafe`)
* `str::is_char_boundary`
* `<*const T>::as_ref`
* `<*mut T>::as_ref`
* `<*mut T>::as_mut`
* `AsciiExt::make_ascii_uppercase`
* `AsciiExt::make_ascii_lowercase`
* `char::decode_utf16`
* `char::DecodeUtf16`
* `char::DecodeUtf16Error`
* `char::DecodeUtf16Error::unpaired_surrogate`
* `BTreeSet::take`
* `BTreeSet::replace`
* `BTreeSet::get`
* `HashSet::take`
* `HashSet::replace`
* `HashSet::get`
* `OsString::with_capacity`
* `OsString::clear`
* `OsString::capacity`
* `OsString::reserve`
* `OsString::reserve_exact`
* `OsStr::is_empty`
* `OsStr::len`
* `std::os::unix::thread`
* `RawPthread`
* `JoinHandleExt`
* `JoinHandleExt::as_pthread_t`
* `JoinHandleExt::into_pthread_t`
* `HashSet::hasher`
* `HashMap::hasher`
* `CommandExt::exec`
* `File::try_clone`
* `SocketAddr::set_ip`
* `SocketAddr::set_port`
* `SocketAddrV4::set_ip`
* `SocketAddrV4::set_port`
* `SocketAddrV6::set_ip`
* `SocketAddrV6::set_port`
* `SocketAddrV6::set_flowinfo`
* `SocketAddrV6::set_scope_id`
* `<[T]>::copy_from_slice`
* `ptr::read_volatile`
* `ptr::write_volatile`
* The `#[deprecated]` attribute
* `OpenOptions::create_new`
Deprecated
* `std::raw::Slice` - use raw parts of `slice` module instead
* `std::raw::Repr` - use raw parts of `slice` module instead
* `str::char_range_at` - use slicing plus `chars()` plus `len_utf8`
* `str::char_range_at_reverse` - use slicing plus `chars().rev()` plus `len_utf8`
* `str::char_at` - use slicing plus `chars()`
* `str::char_at_reverse` - use slicing plus `chars().rev()`
* `str::slice_shift_char` - use `chars()` plus `Chars::as_str`
* `CommandExt::session_leader` - use `before_exec` instead.
Closes#27719
cc #27751 (deprecating the `Slice` bits)
Closes#27754Closes#27780Closes#27809Closes#27811Closes#27830Closes#28050Closes#29453Closes#29791Closes#29935Closes#30014Closes#30752Closes#31262
cc #31398 (still need to deal with `before_exec`)
Closes#31405Closes#31572Closes#31755Closes#31756
Following changes:
* birthtime does not exist on DragonFly
* errno: __dfly_error is no more. Use #[thread_local] static errno.
* clock_gettime expects a c_ulong (use a type alias)
These changes are required to build DragonFly snapshots again.
Previously, the thread name (&str) was converted to a CString in the
new thread, but outside unwind::try, causing a panic to continue into FFI.
This patch changes that behaviour, so that the panic instead happens
in the parent thread (where panic infrastructure is properly set up),
not the new thread.
This could potentially be a breaking change for architectures who don't
support thread names.
Signed-off-by: David Henningsson <diwic@ubuntu.com>
Automated conversion using the untry tool [1] and the following command:
```
$ find -name '*.rs' -type f | xargs untry
```
at the root of the Rust repo.
[1]: https://github.com/japaric/untry
This code was currently only exercised on OSX, but this applies the same method
of subtraction used on Linux which doesn't have the same overflow issues.
Note that this currently includes no tests, but that's because this is only
visible with debug assertions enabled. Soon, however, I'll enable debug
assertions on all auto builds on the bots so we should get testing for this.
Closes#32268
Removes all unstable and deprecated APIs prior to the 1.8 release. All APIs that
are deprecated in the 1.8 release are sticking around for the rest of this
cycle.
Some notable changes are:
* The `dynamic_lib` module was moved into `rustc_back` as the compiler still
relies on a few bits and pieces.
* The `DebugTuple` formatter now special-cases an empty struct name with only
one field to append a trailing comma.
