CFI: Support provided methods on traits
Provided methods currently don't get type erasure performed on them because they are not in an `impl` block. If we are instantiating a method that is an associated item, but *not* in an impl block, treat it as a provided method instead.
Disable run-make/split-debuginfo test for RISC-V 64
Together with `@Hoverbear,` we've been improving the state of the riscv64gc-unknown-linux-gnu target.
This is in relation to https://github.com/rust-lang/rust/pull/125220 where `tests/ui/debuginfo/debuginfo-emit-llvm-ir-and-split-debuginfo.rs` was disabled for RISC-V 64 in that another test, `tests/run-make/split-debuginfo` also needs to be disabled due to https://github.com/llvm/llvm-project/issues/56642 and the changes made in https://github.com/rust-lang/rust/pull/120518.
This test appears to be a host test, not a target test, so it isn't seen failing in https://github.com/rust-lang/rust/pull/126641, however, we are in the process of testing host tools for riscv64-gc-unknown-linux-gnu so this test has now been noticed to be a problem.
interpret: add sanity check in dyn upcast to double-check what codegen does
For dyn receiver calls, we already have two codepaths: look up the function to call by indexing into the vtable, or alternatively resolve the DefId given the dynamic type of the receiver. With debug assertions enabled, the interpreter does both and compares the results. (Without debug assertions we always use the vtable as it is simpler.)
This PR does the same for dyn trait upcasts. However, for casts *not* using the vtable is the easier thing to do, so now the vtable path is the debug-assertion-only path. In particular, there are cases where the vtable does not contain a pointer for upcasts but instead reuses the old pointer: when the supertrait vtable is a prefix of the larger vtable. We don't want to expose this optimization and detect UB if people do a transmute assuming this optimization, so we cannot in general use the vtable indexing path.
r? ``@oli-obk``
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. It is scalable from 8-bit to 64-bit microcontroller environments. The primary governing standards in NuttX are POSIX and ANSI standards.
NuttX adopts additional standard APIs from Unix and other common RTOSs, such as VxWorks. These APIs are used for functionality not available under the POSIX and ANSI standards. However, some APIs, like fork(), are not appropriate for deeply-embedded environments and are not implemented in NuttX.
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
I'll be adding libstd support for NuttX in the future, but for now I'll just add the targets.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target
> maintainers") on record to be CCed when issues arise regarding the target.
> (The mechanism to track and CC such developers may evolve over time.)
I will be the target maintainer for this target on matters that pertain to the NuttX part of the triple.
For matters pertaining to the riscv or arm part of the triple, there should be no difference from all other targets. If there are issues, I will address issues regarding the target.
> Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.
This is a new supported OS, so I have taken the origin target like `riscv32imac-unknown-none-elf` or `thumbv7m-none-eabi`
and changed the `os` section to `nuttx`.
> Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.
I feel that the target name does not introduce any ambiguity.
> Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.
The only unusual requirement for building the compiler-builtins crate is a standard RISC-V or ARM C compiler supported by cc-rs, and using this target does not require any additional software beyond what is shipped by rustup.
> The target must not introduce license incompatibilities.
All of the additional code will use Apache-2.0.
> Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).
Agreed, and there is no problem here.
> The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.
No new dependencies are added.
> Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.
Linking is performed by rust-lld
> "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.
There are no terms. NuttX is distributed under the Apache 2.0 license.
> Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.
I'm not the reviewer here.
> This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.
Again I'm not the reviewer here.
> Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
> The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.
Building is described in platform support doc, but libstd is not supported now,
I'll implement it later.
> Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via `@`) to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.
Understood.
> Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.
I believe I didn't break any other target.
> In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.
I think there are no such problems in this PR.
> Tier 3 targets must be able to produce assembly using at least one of
> rustc's supported backends from any host target. (Having support in a fork
> of the backend is not sufficient, it must be upstream.)
Yes, it use standard RISCV or ARM backend to generate assembly.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Rollup of 7 pull requests
Successful merges:
- #121533 (Handle .init_array link_section specially on wasm)
- #127825 (Migrate `macos-fat-archive`, `manual-link` and `archive-duplicate-names` `run-make` tests to rmake)
- #127891 (Tweak suggestions when using incorrect type of enum literal)
- #127902 (`collect_tokens_trailing_token` cleanups)
- #127928 (Migrate `lto-smoke-c` and `link-path-order` `run-make` tests to rmake)
- #127935 (Change `binary_asm_labels` to only fire on x86 and x86_64)
- #127953 ([compiletest] Search *.a when getting dynamic libraries on AIX)
r? `@ghost`
`@rustbot` modify labels: rollup
Don't allow unsafe statics outside of extern blocks
This PR fixes a regression where we allowed `unsafe static` items in top-level modules (i.e. outside of `unsafe extern` blocks).
It's harder IMO to integrate this into the `check_item_safety` function, so I opted to just put this check on the `static` item itself.
Beta version of this lives at #127944.
r? ```@oli-obk``` or ```@spastorino```
When finding item gated behind a `cfg` flag, point at it
Previously we would only mention that the item was gated out, and opportunisitically mention the feature flag name when possible. We now point to the place where the item was gated, which can be behind layers of macro indirection, or in different modules.
```
error[E0433]: failed to resolve: could not find `doesnt_exist` in `inner`
--> $DIR/diagnostics-cross-crate.rs:18:23
|
LL | cfged_out::inner::doesnt_exist::hello();
| ^^^^^^^^^^^^ could not find `doesnt_exist` in `inner`
|
note: found an item that was configured out
--> $DIR/auxiliary/cfged_out.rs:6:13
|
LL | pub mod doesnt_exist {
| ^^^^^^^^^^^^
note: the item is gated here
--> $DIR/auxiliary/cfged_out.rs:5:5
|
LL | #[cfg(FALSE)]
| ^^^^^^^^^^^^^
```
Represent type-level consts with new-and-improved `hir::ConstArg`
### Summary
This is a step toward `min_generic_const_exprs`. We now represent all const
generic arguments using an enum that differentiates between const *paths*
(temporarily just bare const params) and arbitrary anon consts that may perform
computations. This will enable us to cleanly implement the `min_generic_const_args`
plan of allowing the use of generics in paths used as const args, while
disallowing their use in arbitrary anon consts. Here is a summary of the salient
aspects of this change:
- Add `current_def_id_parent` to `LoweringContext`
This is needed to track anon const parents properly once we implement
`ConstArgKind::Path` (which requires moving anon const def-creation
outside of `DefCollector`).
- Create `hir::ConstArgKind` enum with `Path` and `Anon` variants. Use it in the
existing `hir::ConstArg` struct, replacing the previous `hir::AnonConst` field.
- Use `ConstArg` for all instances of const args. Specifically, use it instead
of `AnonConst` for assoc item constraints, array lengths, and const param
defaults.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at https://github.com/rust-lang/rust/issues/127009.
### Followup items post-merge
- Use `ConstArgKind::Path` for all const paths, not just const params.
- Fix (no github dont close this issue) #127009
- If a path in generic args doesn't resolve as a type, try to resolve as a const
instead (do this in rustc_resolve). Then remove the special-casing from
`rustc_ast_lowering`, so that all params will automatically be lowered as
`ConstArgKind::Path`.
- (?) Consider making `const_evaluatable_unchecked` a hard error, or at least
trying it in crater
r? `@BoxyUwU`
Change `binary_asm_labels` to only fire on x86 and x86_64
In <https://github.com/rust-lang/rust/pull/126922>, the `binary_asm_labels` lint was added which flags labels such as `0:` and `1:`. Before that change, LLVM was giving a confusing error on x86/x86_64 because of an incorrect interpretation.
However, targets other than x86 and x86_64 never had the error message and have not been a problem. This means that the lint was causing code that previously worked to start failing (e.g. `compiler_builtins`), rather than only providing a more clear messages where there has always been an error.
Adjust the lint to only fire on x86 and x86_64 assembly to avoid this regression.
Also update the help message.
Fixes: https://github.com/rust-lang/rust/issues/127821
Tweak suggestions when using incorrect type of enum literal
More accurate suggestions when writing wrong style of enum variant literal:
```
error[E0533]: expected value, found struct variant `E::Empty3`
--> $DIR/empty-struct-braces-expr.rs:18:14
|
LL | let e3 = E::Empty3;
| ^^^^^^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | let e3 = E::Empty3 {};
| ++
```
```
error[E0533]: expected value, found struct variant `E::V`
--> $DIR/struct-literal-variant-in-if.rs:10:13
|
LL | if x == E::V { field } {}
| ^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | if x == (E::V { field }) {}
| + +
```
```
error[E0618]: expected function, found enum variant `Enum::Unit`
--> $DIR/suggestion-highlights.rs:15:5
|
LL | Unit,
| ---- enum variant `Enum::Unit` defined here
...
LL | Enum::Unit();
| ^^^^^^^^^^--
| |
| call expression requires function
|
help: `Enum::Unit` is a unit enum variant, and does not take parentheses to be constructed
|
LL - Enum::Unit();
LL + Enum::Unit;
|
```
```
error[E0599]: no variant or associated item named `tuple` found for enum `Enum` in the current scope
--> $DIR/suggestion-highlights.rs:36:11
|
LL | enum Enum {
| --------- variant or associated item `tuple` not found for this enum
...
LL | Enum::tuple;
| ^^^^^ variant or associated item not found in `Enum`
|
help: there is a variant with a similar name
|
LL | Enum::Tuple(/* i32 */);
| ~~~~~~~~~~~~~~~~;
|
```
Tweak "field not found" suggestion when giving struct literal for tuple struct type:
```
error[E0560]: struct `S` has no field named `x`
--> $DIR/nested-non-tuple-tuple-struct.rs:8:19
|
LL | pub struct S(f32, f32);
| - `S` defined here
...
LL | let _x = (S { x: 1.0, y: 2.0 }, S { x: 3.0, y: 4.0 });
| ^ field does not exist
|
help: `S` is a tuple struct, use the appropriate syntax
|
LL | let _x = (S(/* f32 */, /* f32 */), S { x: 3.0, y: 4.0 });
| ~~~~~~~~~~~~~~~~~~~~~~~
Use more accurate span for `addr_of!` suggestion
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
Mention that type parameters are used recursively on bivariance error
Right now when a type parameter is used recursively, even with indirection (so it has a finite size) we say that the type parameter is unused:
```
struct B<T>(Box<B<T>>);
```
This is confusing, because the type parameter is *used*, it just doesn't have its variance constrained. This PR tweaks that message to mention that it must be used *non-recursively*.
Not sure if we should actually mention "variance" here, but also I'd somewhat prefer we don't keep the power users in the dark w.r.t the real underlying issue, which is that the variance isn't constrained. That technical detail is reserved for a note, though.
cc `@fee1-dead`
Fixes#118976Fixes#26283Fixes#53191Fixes#105740Fixes#110466
Fix ICE in suggestion caused by `⩵` being recovered as `==`
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
Fix#127823.
Fuchsia status code match arm
Adds a match arm for the Fuchsia status code upon a process abort. An additional change moves the Windows status code down into the match arm itself instead of being defined as a constant elsewhere.
r? tmandry
The link pointed to a closed issue. Create a new one and point the link
to it.
Also add a help message to hint what change the user could make.
Fixes: https://github.com/rust-lang/rust/issues/127821
We already point these out quite aggressively, telling people not to use them, but would normally be rendered as nothing. Having them visible will make it easier for people to actually deal with them.
```
error: unicode codepoint changing visible direction of text present in literal
--> $DIR/unicode-control-codepoints.rs:26:22
|
LL | println!("{:?}", '�');
| ^-^
| ||
| |'\u{202e}'
| this literal contains an invisible unicode text flow control codepoint
|
= note: these kind of unicode codepoints change the way text flows on applications that support them, but can cause confusion because they change the order of characters on the screen
= help: if their presence wasn't intentional, you can remove them
help: if you want to keep them but make them visible in your source code, you can escape them
|
LL | println!("{:?}", '\u{202e}');
| ~~~~~~~~
```
vs the previous
```
error: unicode codepoint changing visible direction of text present in literal
--> $DIR/unicode-control-codepoints.rs:26:22
|
LL | println!("{:?}", '');
| ^-
| ||
| |'\u{202e}'
| this literal contains an invisible unicode text flow control codepoint
|
= note: these kind of unicode codepoints change the way text flows on applications that support them, but can cause confusion because they change the order of characters on the screen
= help: if their presence wasn't intentional, you can remove them
help: if you want to keep them but make them visible in your source code, you can escape them
|
LL | println!("{:?}", '\u{202e}');
| ~~~~~~~~
```
No longer track "zero-width" chars in `SourceMap`, read directly from the line when calculating the `display_col` of a `BytePos`. Move `char_width` to `rustc_span` and use it from the emitter.
This change allows the following to properly align in terminals (depending on the font, the replaced control codepoints are rendered as 1 or 2 width, on my terminal they are rendered as 1, on VSCode text they are rendered as 2):
```
error: this file contains an unclosed delimiter
--> $DIR/issue-68629.rs:5:17
|
LL | ␜␟ts␀![{i
| -- unclosed delimiter
| |
| unclosed delimiter
LL | ␀␀ fn rݻoa>rݻm
| ^
```
In <https://github.com/rust-lang/rust/pull/126922>, the
`binary_asm_labels` lint was added which flags labels such as `0:` and
`1:`. Before that change, LLVM was giving a confusing error on
x86/x86_64 because of an incorrect interpretation.
However, targets other than x86 and x86_64 never had the error message
and have not been a problem. This means that the lint was causing code
that previously worked to start failing (e.g. `compiler_builtins`),
rather than only providing a more clear messages where there has always
been an error.
Adjust the lint to only fire on x86 and x86_64 assembly to avoid this
regression.
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
```
error[E0560]: struct `S` has no field named `x`
--> $DIR/nested-non-tuple-tuple-struct.rs:8:19
|
LL | pub struct S(f32, f32);
| - `S` defined here
...
LL | let _x = (S { x: 1.0, y: 2.0 }, S { x: 3.0, y: 4.0 });
| ^ field does not exist
|
help: `S` is a tuple struct, use the appropriate syntax
|
LL | let _x = (S(/* f32 */, /* f32 */), S { x: 3.0, y: 4.0 });
| ~~~~~~~~~~~~~~~~~~~~~~~
```
```
error[E0533]: expected value, found struct variant `E::Empty3`
--> $DIR/empty-struct-braces-expr.rs:18:14
|
LL | let e3 = E::Empty3;
| ^^^^^^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | let e3 = E::Empty3 {};
| ++
```
```
error[E0533]: expected value, found struct variant `E::V`
--> $DIR/struct-literal-variant-in-if.rs:10:13
|
LL | if x == E::V { field } {}
| ^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | if x == (E::V { field }) {}
| + +
```
```
error[E0618]: expected function, found enum variant `Enum::Unit`
--> $DIR/suggestion-highlights.rs:15:5
|
LL | Unit,
| ---- enum variant `Enum::Unit` defined here
...
LL | Enum::Unit();
| ^^^^^^^^^^--
| |
| call expression requires function
|
help: `Enum::Unit` is a unit enum variant, and does not take parentheses to be constructed
|
LL - Enum::Unit();
LL + Enum::Unit;
|
```
```
error[E0599]: no variant or associated item named `tuple` found for enum `Enum` in the current scope
--> $DIR/suggestion-highlights.rs:36:11
|
LL | enum Enum {
| --------- variant or associated item `tuple` not found for this enum
...
LL | Enum::tuple;
| ^^^^^ variant or associated item not found in `Enum`
|
help: there is a variant with a similar name
|
LL | Enum::Tuple(/* i32 */);
| ~~~~~~~~~~~~~~~~;
|
```
