Drop time dependency from bootstrap
This was only used for the inclusion of 'current' dates into our manpages, but
it is not clear that this is practically necessary. The manpage is essentially
never updated, and so we can likely afford to keep a manual date in these files.
It also seems possible to just omit it, but that may cause other tools trouble,
so avoid doing that for now.
This is largely done to reduce bootstrap complexity; the time crate is not particularly
small and in #92480 would have started pulling in num-threads, which does runtime
thread count detection. I would prefer to avoid that, so filing this to just drop the nearly
unused dependency entirely.
r? `@pietroalbini`
This was only used for the inclusion of 'current' dates into our manpages, but
it is not clear that this is practically necessary. The manpage is essentially
never updated, and so we can likely afford to keep a manual date in these files.
It also seems possible to just omit it, but that may cause other tools trouble,
so avoid doing that for now.
This is particularly intended for invoking compiletest; the command line there
is long (3,350 characters on my system) and takes up a lot of screen real estate
for little benefit to the majority of those running bootstrap. This moves
printing it to verbose mode (-v must be passed) which means that it's still
possible to access when needed for debugging.
The main downside is that CI logs will by-default become less usable for
debugging (particularly) spurious failures, but it is pretty rare for us to
really need the information there -- it's usually fairly obvious what is being
run with a little investigation.
Previously, it would concatenate the relative path to the current
subdirectory, which looked at the wrong folder.
I tested this by checking out `1.56.1`, changing the current directory
to `src/`, and running `../x.py build`.
The new submodule handling depends on `is_git()` to be accurate to
decide whether it should handle submodules at all or not. Unfortunately,
`is_git()` treated "this directory does not have a git repository" and
"this repository should not be used for SHA/version/commit date info"
the same. This changes it to distinguish the two.
To clarify: ignore_get is set by default whenever channel == "dev", which it is by default whenever you're compiling locally. So basically everyone would hit this, not just people who had explicitly configured ignore_git.
Here's an example of an error this fixes:
```
$ x build
Updating only changed submodules
Submodules updated in 0.01 seconds
Finished dev [unoptimized + debuginfo] target(s) in 0.17s
warning: x.py has made several changes recently you may want to look at
help: consider looking at the changes in `src/bootstrap/CHANGELOG.md`
note: to silence this warning, add `changelog-seen = 2` at the top of `config.toml`
Building stage0 std artifacts (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu)
Finished release [optimized] target(s) in 0.16s
Copying stage0 std from stage0 (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu / x86_64-unknown-linux-gnu)
Building LLVM for x86_64-unknown-linux-gnu
detected home dir change, cleaning out entire build directory
running: "cmake" "/home/joshua/rustc3/src/llvm-project/llvm" "-G" "Ninja" "-DLLVM_ENABLE_ASSERTIONS=OFF" "-DLLVM_TARGETS_TO_BUILD=AArch64;ARM;BPF;Hexagon;MSP430;Mips;NVPTX;PowerPC;RISCV;Sparc;SystemZ;WebAssembly;X86" "-DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=AVR" "-DLLVM_INCLUDE_EXAMPLES=OFF" "-DLLVM_INCLUDE_DOCS=OFF" "-DLLVM_INCLUDE_BENCHMARKS=OFF" "-DLLVM_ENABLE_TERMINFO=OFF" "-DLLVM_ENABLE_LIBEDIT=OFF" "-DLLVM_ENABLE_BINDINGS=OFF" "-DLLVM_ENABLE_Z3_SOLVER=OFF" "-DLLVM_PARALLEL_COMPILE_JOBS=48" "-DLLVM_TARGET_ARCH=x86_64" "-DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-unknown-linux-gnu" "-DLLVM_ENABLE_ZLIB=ON" "-DLLVM_ENABLE_LIBXML2=OFF" "-DLLVM_VERSION_SUFFIX=-rust-dev" "-DCMAKE_INSTALL_MESSAGE=LAZY" "-DCMAKE_C_COMPILER=gcc" "-DCMAKE_CXX_COMPILER=g++" "-DCMAKE_ASM_COMPILER=gcc" "-DCMAKE_C_FLAGS=-ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_CXX_FLAGS=-ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_INSTALL_PREFIX=/home/joshua/rustc3/build/x86_64-unknown-linux-gnu/llvm" "-DCMAKE_ASM_FLAGS= -ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_BUILD_TYPE=Release"
CMake Error: The source directory "/home/joshua/rustc3/src/llvm-project/llvm" does not exist.
Specify --help for usage, or press the help button on the CMake GUI.
thread 'main' panicked at '
command did not execute successfully, got: exit status: 1
build script failed, must exit now', /home/joshua/.local/lib/cargo/registry/src/github.com-1ecc6299db9ec823/cmake-0.1.44/src/lib.rs:885:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
finished in 0.783 seconds
Build completed unsuccessfully in 0:00:01
```
This only updates the submodules the first time they're needed, instead
of unconditionally the first time you run x.py.
Ideally, this would move *all* submodules and not exclude some tools and
backtrace. Unfortunately, cargo requires all `Cargo.toml` files in the
whole workspace to be present to build any crate.
On my machine, this takes the time for an initial submodule clone (for
`x.py --help`) from 55.70 to 15.87 seconds.
This uses exactly the same logic as the LLVM update used, modulo some
minor cleanups:
- Use a local variable for `src.join(relative_path)`
- Remove unnecessary arrays for `book!` macro and make the macro simpler to use
- Add more comments
Use HTTPS links where possible
While looking at #86583, I wondered how many other (insecure) HTTP links were in `rustc`. This changes most other `http` links to `https`. While most of the links are in comments or documentation, there are a few other HTTP links that are used by CI that are changed to HTTPS.
Notes:
- I didn't change any to or in licences
- Some links don't support HTTPS :(
- Some `http` links were dead, in those cases I upgraded them to their new places (all of which used HTTPS)
Don't run sanity checks for `x.py setup`
These requirements change as soon as the command finishes running, and
`setup` doesn't build anything, so the check doesn't make sense.
Previously, `x.py setup` would give hard errors if `ninja` and `cmake`
were not installed, even if the new profile didn't require them.
Fixes https://github.com/rust-lang/rust/issues/84938.
These requirements change as soon as the command finishes running, and
`setup` doesn't build anything, so the check doesn't make sense.
Previously, `x.py setup` would give hard errors if `ninja` and `cmake`
were not installed, even if the new profile didn't require them.
This enables better caching, since LLVM is only updated when needed, not
whenever x.py is run. Before, bootstrap.py had to use heuristics to
guess if LLVM would be needed, and updated the module more often than
necessary as a result.
This syncs the LLVM submodule only just before building the compiler, so
people working on the standard library never have to worry about it.
Example output:
```
Copying stage0 std from stage0 (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu / x86_64-unknown-linux-gnu)
Updating submodule src/llvm-project
Submodule 'src/llvm-project' (https://github.com/rust-lang/llvm-project.git) registered for path 'src/llvm-project'
Submodule path 'src/llvm-project': checked out 'f9a8d70b6e0365ac2172ca6b7f1de0341297458d'
```
- Don't try to update the LLVM submodule when using system LLVM
Previously, this would try to update LLVM unconditionally. Now the
submodule is only initialized if `llvm-config` is not set.
- Don't update LLVM submodule in dry runs
This prevents the following test failures:
```
running 17 tests
fatal: invalid gitfile format: /checkout/src/llvm-project/.git
test builder::tests::defaults::build_cross_compile ... FAILED
---- builder::tests::defaults::build_default stdout ----
thread 'main' panicked at 'command did not execute successfully: "git" "rev-parse" "HEAD"
expected success, got: exit code: 128', src/build_helper/lib.rs:139:9
```
- Try running git without --progress if it fails the first time
This avoids having to do version detection to see if --progress is
supported or not.
- Don't try to update submodules when the source repository isn't managed by git
- Update LLVM submodules that have already been checked out
- Only check for whether the submodule should be updated in lib.rs; update
it unconditionally in native.rs
- Add an assertion that `link-shared = true` when `thin-lto = true`.
Previously, link-shared would be silently overwritten.
- Get rid of `Option<bool>` in bootstrap/config.rs. Set defaults
immediately instead of delaying until later in bootstrap. This makes
it easier to find what the default value is.
- Remove redundant `config.x = false` when the default was already false
- Set defaults for `bindir` in `default_opts()` instead of `parse()`
- Update `download-ci-llvm = if-supported` option to match bootstrap.py
- Remove redundant check for link_shared. Previously, it was checked twice.
- Update various options in config.toml.example to their defaults.
Previously, some options showed an example value instead of the
default value.
- Fix incorrect defaults in config.toml.example
+ `use-libcxx` defaults to false
+ Add missing `check-stage = 0`
+ Update several defaults to be conditional (e.g. `if incremental { 10 } else { 100 }`)
- Remove redundant defaults in prose
- Use the same comment for the default and target-dependent `musl-root`
- Fix typos
- Link to `cc_detect` for `cc` and `cxx`, since the logic is ... complicated.
- Update more defaults to better reflect how they actually get set
- Remove ignored `gpg-password-file` option
This stopped being used in
7704d35acc,
but was never removed from config.toml.
- Remove unused flags from `config.toml`
+ Disallow `infodir` and `localstatedir` in `config.toml`
+ Allow the flags in `./configure`, but give a warning that they will be
ignored.
+ Fix incorrect comment that `datadir` will be ignored.
Example output:
```
$ ./configure --set install.infodir=xxx
configure: processing command line
configure:
configure: install.infodir := xxx
configure: build.configure-args := ['--set', 'install.infodir=xxx']
warning: infodir will be ignored
configure:
configure: writing `config.toml` in current directory
configure:
configure: run `python /home/joshua/rustc3/x.py --help`
configure:
```
- Update CHANGELOG
- Add "as an example" where appropriate
- Link to an issue instead of to ephemeral chats
This adds `rust.description` to the config as a descriptive string to be
appended to `rustc --version` output, which is also used in places like
debuginfo `DW_AT_producer`. This may be useful for supplementary build
information, like distro-specific package versions.
For example, in Fedora 33, `gcc --version` outputs:
gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6)
With this change, we can add similar vendor info to `rustc --version`.
Support enable/disable sanitizers/profiler per target
This PR add options under `[target.*]` of `config.toml` which can enable or disable sanitizers/profiler runtime for corresponding target.
If these options are empty, the global options under `[build]` will take effect.
Fix#78329
This should produce more efficient code, with fewer calls to
__tls_get_addr. The tradeoff is that libraries using it won't work with
dlopen, but that shouldn't be a problem for tools or for our own
internal libraries.
Co-authored-by: Mark Rousskov <mark.simulacrum@gmail.com>
Include `llvm-dis`, `llc` and `opt` in `llvm-tools-preview` component
Fixes#55890
It's useful to have `llc` and `opt` available when debugging an LLVM
miscompilation,.
