While the semantic intent of a OnceCell/OnceLock is that it can only be written
to once (upon init), the fact of the matter is that both these types offer a
`take(&mut self) -> Option<T>` mechanism that, when successful, resets the cell
to its initial state, thereby technically allowing it to be written to again.
Despite the fact that this can only happen with a mutable reference (generally
only used during the construction of the OnceCell/OnceLock), it would be
incorrect to say that the type itself as a whole categorically prevents being
initialized or written to more than once (since it is possible to imagine an
identical type only without the `take()` method that actually fulfills that
contract).
To clarify, change "that cannot be.." to "that nominally cannot.." and add a
note to OnceCell about what can be done with an `&mut Self` reference.
Make `clamp` inline
Context: rust-lang/rust-clippy#12826
This results in slightly more optimized assembly. (And most important, it's now less than lines than just manually clamping a value)
Add a fast-path to `Debug` ASCII `&str`
Instead of going through the `EscapeDebug` machinery, we can just skip over ASCII chars that don’t need any escaping.
---
This is an alternative / a companion to https://github.com/rust-lang/rust/pull/121138.
The other PR is adding the fast path deep within `EscapeDebug`, whereas this skips as early as possible.
Validate the special layout restriction on `DynMetadata`
If you look at <https://stdrs.dev/nightly/x86_64-unknown-linux-gnu/std/ptr/struct.DynMetadata.html>, you'd think that `DynMetadata` is a struct with fields.
But it's actually not, because the lang item is special-cased in rustc_middle layout:
7601adcc76/compiler/rustc_middle/src/ty/layout.rs (L861-L864)
That explains the very confusing codegen ICEs I was getting in https://github.com/rust-lang/rust/pull/124251#issuecomment-2128543265
> Tried to extract_field 0 from primitive OperandRef(Immediate((ptr: %5 = load ptr, ptr %4, align 8, !nonnull !3, !align !5, !noundef !3)) @ TyAndLayout { ty: DynMetadata<dyn Callsite>, layout: Layout { size: Size(8 bytes), align: AbiAndPrefAlign { abi: Align(8 bytes), pref: Align(8 bytes) }, abi: Scalar(Initialized { value: Pointer(AddressSpace(0)), valid_range: 1..=18446744073709551615 }), fields: Primitive, largest_niche: Some(Niche { offset: Size(0 bytes), value: Pointer(AddressSpace(0)), valid_range: 1..=18446744073709551615 }), variants: Single { index: 0 }, max_repr_align: None, unadjusted_abi_align: Align(8 bytes) } })
because there was a `Field` projection despite the layout clearly saying it's [`Primitive`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_target/abi/enum.FieldsShape.html#variant.Primitive).
Thus this PR updates the MIR validator to check for such a projection, and changes `libcore` to not ever emit any projections into `DynMetadata`, just to transmute the whole thing when it wants a pointer.
Cleanup check-cfg handling in core and std
Follow-up to https://github.com/rust-lang/rust/pull/125296 where we:
- expect any feature cfg in std, due to `#[path]` imports
- move some check-cfg args inside the `build.rs` as per Cargo recommendation
- and replace the fake Cargo feature `"restricted-std"` by the custom cfg `restricted_std`
Fixes https://github.com/rust-lang/rust/pull/125296#issuecomment-2127009301
r? `@bjorn3` (maybe, feel free to re-roll)
Actually use TAIT instead of emulating it
`core`'s `impl_fn_for_zst` macro is just a hacky way of emulating TAIT. TAIT has become stable enough to be used [in other places](e8fbd99128/library/std/src/backtrace.rs (L431)) inside the standard library, so let's use it in `core` as well.
Expand `for_loops_over_fallibles` lint to lint on fallibles behind references.
Extends the scope of the (warn-by-default) lint `for_loops_over_fallibles` from just `for _ in x` where `x: Option<_>/Result<_, _>` to also cover `x: &(mut) Option<_>/Result<_>`
```rs
fn main() {
// Current lints
for _ in Some(42) {}
for _ in Ok::<_, i32>(42) {}
// New lints
for _ in &Some(42) {}
for _ in &mut Some(42) {}
for _ in &Ok::<_, i32>(42) {}
for _ in &mut Ok::<_, i32>(42) {}
// Should not lint
for _ in Some(42).into_iter() {}
for _ in Some(42).iter() {}
for _ in Some(42).iter_mut() {}
for _ in Ok::<_, i32>(42).into_iter() {}
for _ in Ok::<_, i32>(42).iter() {}
for _ in Ok::<_, i32>(42).iter_mut() {}
}
```
<details><summary><code>cargo build</code> diff</summary>
```diff
diff --git a/old.out b/new.out
index 84215aa..ca195a7 100644
--- a/old.out
+++ b/new.out
`@@` -1,33 +1,93 `@@`
warning: for loop over an `Option`. This is more readably written as an `if let` statement
--> src/main.rs:3:14
|
3 | for _ in Some(42) {}
| ^^^^^^^^
|
= note: `#[warn(for_loops_over_fallibles)]` on by default
help: to check pattern in a loop use `while let`
|
3 | while let Some(_) = Some(42) {}
| ~~~~~~~~~~~~~~~ ~~~
help: consider using `if let` to clear intent
|
3 | if let Some(_) = Some(42) {}
| ~~~~~~~~~~~~ ~~~
warning: for loop over a `Result`. This is more readably written as an `if let` statement
--> src/main.rs:4:14
|
4 | for _ in Ok::<_, i32>(42) {}
| ^^^^^^^^^^^^^^^^
|
help: to check pattern in a loop use `while let`
|
4 | while let Ok(_) = Ok::<_, i32>(42) {}
| ~~~~~~~~~~~~~ ~~~
help: consider using `if let` to clear intent
|
4 | if let Ok(_) = Ok::<_, i32>(42) {}
| ~~~~~~~~~~ ~~~
-warning: `for-loops-over-fallibles` (bin "for-loops-over-fallibles") generated 2 warnings
- Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.04s
+warning: for loop over a `&Option`. This is more readably written as an `if let` statement
+ --> src/main.rs:7:14
+ |
+7 | for _ in &Some(42) {}
+ | ^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+7 | while let Some(_) = &Some(42) {}
+ | ~~~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+7 | if let Some(_) = &Some(42) {}
+ | ~~~~~~~~~~~~ ~~~
+
+warning: for loop over a `&mut Option`. This is more readably written as an `if let` statement
+ --> src/main.rs:8:14
+ |
+8 | for _ in &mut Some(42) {}
+ | ^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+8 | while let Some(_) = &mut Some(42) {}
+ | ~~~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+8 | if let Some(_) = &mut Some(42) {}
+ | ~~~~~~~~~~~~ ~~~
+
+warning: for loop over a `&Result`. This is more readably written as an `if let` statement
+ --> src/main.rs:9:14
+ |
+9 | for _ in &Ok::<_, i32>(42) {}
+ | ^^^^^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+9 | while let Ok(_) = &Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+9 | if let Ok(_) = &Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~ ~~~
+
+warning: for loop over a `&mut Result`. This is more readably written as an `if let` statement
+ --> src/main.rs:10:14
+ |
+10 | for _ in &mut Ok::<_, i32>(42) {}
+ | ^^^^^^^^^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+10 | while let Ok(_) = &mut Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+10 | if let Ok(_) = &mut Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~ ~~~
+
+warning: `for-loops-over-fallibles` (bin "for-loops-over-fallibles") generated 6 warnings
+ Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.02s
```
</details>
-----
Question:
* ~~Currently, the article `an` is used for `&Option`, and `&mut Option` in the lint diagnostic, since that's what `Option` uses. Is this okay or should it be changed? (likewise, `a` is used for `&Result` and `&mut Result`)~~ The article `a` is used for `&Option`, `&mut Option`, `&Result`, `&mut Result` and (as before) `Result`. Only `Option` uses `an` (as before).
`@rustbot` label +A-lint
Rollup of 7 pull requests
Successful merges:
- #125043 (reference type safety invariant docs: clarification)
- #125306 (Force the inner coroutine of an async closure to `move` if the outer closure is `move` and `FnOnce`)
- #125355 (Use Backtrace::force_capture instead of Backtrace::capture in rustc_log)
- #125382 (rustdoc: rename `issue-\d+.rs` tests to have meaningful names (part 7))
- #125391 (Minor serialize/span tweaks)
- #125395 (Remove unnecessary `.md` from the documentation sidebar)
- #125399 (Stop using `to_hir_binop` in codegen)
r? `@ghost`
`@rustbot` modify labels: rollup
reference type safety invariant docs: clarification
The old text could have been read as saying that you can call a function if these requirements are upheld, which is definitely not true as they are an underapproximation of the actual safety invariant.
I removed the part about functions relaxing the requirements via their documentation... this seems incoherent with saying that it may actually be unsound to ever temporarily violate the requirement. Furthermore, a function *cannot* just relax this for its return value, that would in general be unsound. And the part about "unsafe code in a safe function may assume these invariants are ensured of arguments passed by the caller" also interacts with relaxing things: clearly, if the invariant has been relaxed, unsafe code cannot rely on it any more. There may be a place to give general guidance on what kinds of function contracts can exist, but the reference type is definitely not the right place to write that down.
I also took a clarification from https://github.com/rust-lang/rust/pull/121965 that is orthogonal to the rest of that PR.
Cc ```@joshlf``` ```@scottmcm```
miri: rename intrinsic_fallback_checks_ub to intrinsic_fallback_is_spec
Checking UB is not the only concern, we also have to make sure we are not losing out on non-determinism.
r? ``@oli-obk`` (not urgent, take your time)
offset: allow zero-byte offset on arbitrary pointers
As per prior `@rust-lang/opsem` [discussion](https://github.com/rust-lang/opsem-team/issues/10) and [FCP](https://github.com/rust-lang/unsafe-code-guidelines/issues/472#issuecomment-1793409130):
- Zero-sized reads and writes are allowed on all sufficiently aligned pointers, including the null pointer
- Inbounds-offset-by-zero is allowed on all pointers, including the null pointer
- `offset_from` on two pointers derived from the same allocation is always allowed when they have the same address
This removes surprising UB (in particular, even C++ allows "nullptr + 0", which we currently disallow), and it brings us one step closer to an important theoretical property for our semantics ("provenance monotonicity": if operations are valid on bytes without provenance, then adding provenance can't make them invalid).
The minimum LLVM we require (v17) includes https://reviews.llvm.org/D154051, so we can finally implement this.
The `offset_from` change is needed to maintain the equivalence with `offset`: if `let ptr2 = ptr1.offset(N)` is well-defined, then `ptr2.offset_from(ptr1)` should be well-defined and return N. Now consider the case where N is 0 and `ptr1` dangles: we want to still allow offset_from here.
I think we should change offset_from further, but that's a separate discussion.
Fixes https://github.com/rust-lang/rust/issues/65108
[Tracking issue](https://github.com/rust-lang/rust/issues/117945) | [T-lang summary](https://github.com/rust-lang/rust/pull/117329#issuecomment-1951981106)
Cc `@nikic`
Add opt-for-size core lib feature flag
Adds a feature flag to the core library that enables the possibility to have smaller implementations for certain algorithms.
So far, the core lib has traded performance for binary size. This is likely what most people want since they have big simd-capable machines. However, people on small machines, like embedded devices, don't enjoy the potential speedup of the bigger algorithms, but do have to pay for them. These microcontrollers often only have 16-1024kB of flash memory.
This PR is the result of some talks with project members like `@Amanieu` at RustNL.
There are some open questions of how this is eventually stabilized, but it's a similar question as with the existing `panic_immediate_abort` feature.
Speaking as someone from the embedded side, we'd rather have this unstable for a while as opposed to not having it at all. In the meantime we can try to use it and also add additional PRs to the core lib that uses the feature flag in areas where we find benefit.
Open questions from my side:
- Is this a good feature name?
- `panic_immediate_abort` is fairly verbose, so I went with something equally verbose
- It's easy to refactor later
- I've added the feature to `std` and `alloc` as well as they might benefit too. Do we agree?
- I expect these to get less usage out of the flag since most size-constraint projects don't use these libraries often.
Instead of having a single loop that works on utf-8 `char`s,
this splits the implementation into a loop that quickly skips over
printable ASCII, falling back to per-char iteration for other chunks.
Instead of writing each `char` of an escape sequence one by one,
this delegates to `Display`, which uses `write_str` internally
in order to write the whole escape sequence at once.
