compiletest: Support matching on diagnostics without a span
Using `//~? ERROR my message` on any line of the test.
The new checks are exhaustive, like all other `//~` checks, and unlike the `error-pattern` directive that is sometimes used now to check for span-less diagnostics.
This will allow to eliminate most on `error-pattern` directives in compile-fail tests (except those that are intentionally imprecise due to platform-specific diagnostics).
I didn't migrate any of `error-pattern`s in this PR though, except those where the migration was necessary for the tests to pass.
Add `#[define_opaques]` attribute and require it for all type-alias-impl-trait sites that register a hidden type
Instead of relying on the signature of items to decide whether they are constraining an opaque type, the opaque types that the item constrains must be explicitly listed.
A previous version of this PR used an actual attribute, but had to keep the resolved `DefId`s in a side table.
Now we just lower to fields in the AST that have no surface syntax, instead a builtin attribute macro fills in those fields where applicable.
Note that for convenience referencing opaque types in associated types from associated methods on the same impl will not require an attribute. If that causes problems `#[defines()]` can be used to overwrite the default of searching for opaques in the signature.
One wart of this design is that closures and static items do not have generics. So since I stored the opaques in the generics of functions, consts and methods, I would need to add a custom field to closures and statics to track this information. During a T-types discussion we decided to just not do this for now.
fixes#131298
[AIX] Fix hangs during testing
Fixes all current test hangs experienced during CI runs.
1. ipv6 link-local (the loopback device) gets assigned an automatic zone id of 1, causing the assert to fail and hang in `library/std/src/net/udp/tests.rs`
2. Const alloc does not fail gracefully
3. Debuginfo test has problem with gdb auto load safe path
Tweak output of const panic diagnostic
### Shorten span of panic failures in const context
Previously, we included a redundant prefix on the panic message and a postfix of the location of the panic. The prefix didn't carry any additional information beyond "something failed", and the location of the panic is redundant with the diagnostic's span, which gets printed out even if its code is not shown.
```
error[E0080]: evaluation of constant value failed
--> $DIR/assert-type-intrinsics.rs:11:9
|
LL | MaybeUninit::<!>::uninit().assume_init();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ panic: aborted execution: attempted to instantiate uninhabited type `!`
```
```
error[E0080]: evaluation of `Fail::<i32>::C` failed
--> $DIR/collect-in-dead-closure.rs:9:19
|
LL | const C: () = panic!();
| ^^^^^^^^ explicit panic
|
= note: this error originates in the macro `$crate::panic::panic_2015` which comes from the expansion of the macro `panic` (in Nightly builds, run with -Z macro-backtrace for more info)
```
```
error[E0080]: evaluation of constant value failed
--> $DIR/uninhabited.rs:87:9
|
LL | assert!(false);
| ^^^^^^^^^^^^^^ assertion failed: false
|
= note: this error originates in the macro `assert` (in Nightly builds, run with -Z macro-backtrace for more info)
```
### Remove duplicated span from const eval frame list
When the primary span for a const error is the same as the first frame in the const error report, skip it.
```
error[E0080]: evaluation of constant value failed
--> $DIR/issue-88434-removal-index-should-be-less.rs:3:24
|
LL | const _CONST: &[u8] = &f(&[], |_| {});
| ^^^^^^^^^^^^^^ explicit panic
|
note: inside `f::<{closure@$DIR/issue-88434-removal-index-should-be-less.rs:3:31: 3:34}>`
--> $DIR/issue-88434-removal-index-should-be-less.rs:10:5
|
LL | panic!()
| ^^^^^^^^ the failure occurred here
= note: this error originates in the macro `$crate::panic::panic_2015` which comes from the expansion of the macro `panic` (in Nightly builds, run with -Z macro-backtrace for more info)
```
instead of
```
error[E0080]: evaluation of constant value failed
--> $DIR/issue-88434-removal-index-should-be-less.rs:10:5
|
LL | panic!()
| ^^^^^^^^ explicit panic
|
note: inside `f::<{closure@$DIR/issue-88434-removal-index-should-be-less.rs:3:31: 3:34}>`
--> $DIR/issue-88434-removal-index-should-be-less.rs:10:5
|
LL | panic!()
| ^^^^^^^^
note: inside `_CONST`
--> $DIR/issue-88434-removal-index-should-be-less.rs:3:24
|
LL | const _CONST: &[u8] = &f(&[], |_| {});
| ^^^^^^^^^^^^^^
= note: this error originates in the macro `$crate::panic::panic_2015` which comes from the expansion of the macro `panic` (in Nightly builds, run with -Z macro-backtrace for more info)
note: erroneous constant encountered
--> $DIR/issue-88434-removal-index-should-be-less.rs:3:23
|
LL | const _CONST: &[u8] = &f(&[], |_| {});
| ^^^^^^^^^^^^^^^
```
r? ``@oli-obk``
Defer repeat expr `Copy` checks to end of type checking
Fixes#110443
Defers repeat expr checks that the element type is `Copy` when the length is > 1 (or generic) to end of typeck so that under `generic_arg_infer` repeat exprs are able to have an inferred count, e.g. `let a: [_; 1] = [String::new(); _];`.
Currently the deferring is gated under `generic_arg_infer` though I intend to separately types FCP deferring the checks even outside of `generic_arg_infer` if we wind up not going with an alternative.
Previously, we included a redundant prefix on the panic message and a postfix of the location of the panic. The prefix didn't carry any additional information beyond "something failed", and the location of the panic is redundant with the diagnostic's span, which gets printed out even if its code is not shown.
```
error[E0080]: evaluation of constant value failed
--> $DIR/assert-type-intrinsics.rs:11:9
|
LL | MaybeUninit::<!>::uninit().assume_init();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ evaluation panicked: aborted execution: attempted to instantiate uninhabited type `!`
```
```
error[E0080]: evaluation of `Fail::<i32>::C` failed
--> $DIR/collect-in-dead-closure.rs:9:19
|
LL | const C: () = panic!();
| ^^^^^^^^ evaluation panicked: explicit panic
|
= note: this error originates in the macro
`$crate::panic::panic_2015` which comes from the expansion of the macro
`panic` (in Nightly builds, run with -Z macro-backtrace for more info)
```
```
error[E0080]: evaluation of constant value failed
--> $DIR/uninhabited.rs:41:9
|
LL | assert!(false);
| ^^^^^^^^^^^^^^ evaluation panicked: assertion failed: false
|
= note: this error originates in the macro `assert` (in Nightly builds, run with -Z macro-backtrace for more info)
```
---
When the primary span for a const error is the same as the first frame in the const error report, skip it.
```
error[E0080]: evaluation of constant value failed
--> $DIR/issue-88434-removal-index-should-be-less.rs:3:24
|
LL | const _CONST: &[u8] = &f(&[], |_| {});
| ^^^^^^^^^^^^^^ evaluation panicked: explicit panic
|
note: inside `f::<{closure@$DIR/issue-88434-removal-index-should-be-less.rs:3:31: 3:34}>`
--> $DIR/issue-88434-removal-index-should-be-less.rs:10:5
|
LL | panic!()
| ^^^^^^^^ the failure occurred here
= note: this error originates in the macro `$crate::panic::panic_2015` which comes from the expansion of the macro `panic` (in Nightly builds, run with -Z macro-backtrace for more info)
```
instead of
```
error[E0080]: evaluation of constant value failed
--> $DIR/issue-88434-removal-index-should-be-less.rs:10:5
|
LL | panic!()
| ^^^^^^^^ explicit panic
|
note: inside `f::<{closure@$DIR/issue-88434-removal-index-should-be-less.rs:3:31: 3:34}>`
--> $DIR/issue-88434-removal-index-should-be-less.rs:10:5
|
LL | panic!()
| ^^^^^^^^
note: inside `_CONST`
--> $DIR/issue-88434-removal-index-should-be-less.rs:3:24
|
LL | const _CONST: &[u8] = &f(&[], |_| {});
| ^^^^^^^^^^^^^^
= note: this error originates in the macro `$crate::panic::panic_2015` which comes from the expansion of the macro `panic` (in Nightly builds, run with -Z macro-backtrace for more info)
```
---
Revert order of constant evaluation errors
Point at the code the user wrote first and std functions last.
```
error[E0080]: evaluation of constant value failed
--> $DIR/const-errs-dont-conflict-103369.rs:5:25
|
LL | impl ConstGenericTrait<{my_fn(1)}> for () {}
| ^^^^^^^^ evaluation panicked: Some error occurred
|
note: called from `my_fn`
--> $DIR/const-errs-dont-conflict-103369.rs:10:5
|
LL | panic!("Some error occurred");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
= note: this error originates in the macro `$crate::panic::panic_2015` which comes from the expansion of the macro `panic` (in Nightly builds, run with -Z macro-backtrace for more info)
```
instead of
```
error[E0080]: evaluation of constant value failed
--> $DIR/const-errs-dont-conflict-103369.rs:10:5
|
LL | panic!("Some error occurred");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Some error occurred
|
note: called from `<() as ConstGenericTrait<{my_fn(1)}>>::{constant#0}`
--> $DIR/const-errs-dont-conflict-103369.rs:5:25
|
LL | impl ConstGenericTrait<{my_fn(1)}> for () {}
| ^^^^^^^^
= note: this error originates in the macro `$crate::panic::panic_2015` which comes from the expansion of the macro `panic` (in Nightly builds, run with -Z macro-backtrace for more info)
```
```
error[E0610]: `{integer}` is a primitive type and therefore doesn't have fields
--> $DIR/attempted-access-non-fatal.rs:7:15
|
LL | let _ = 2.l;
| ^
|
help: if intended to be a floating point literal, consider adding a `0` after the period and a `f64` suffix
|
LL - let _ = 2.l;
LL + let _ = 2.0f64;
|
```
Introduce a wrapper for "typed valtrees" and properly check the type before extracting the value
This PR adds a new wrapper type `ty::Value` to replace the tuple `(Ty, ty::ValTree)` and become the new canonical representation of type-level constant values.
The value extraction methods `try_to_bits`/`try_to_bool`/`try_to_target_usize` are moved to this new type. For `try_to_bits` in particular, this avoids some redundant matches on `ty::ConstKind::Value`. Furthermore, these methods and will now properly check the type before extracting the value, which fixes some ICEs.
The name `ty::Value` was chosen to be consistent with `ty::Expr`.
Commit 1 should be non-functional and commit 2 adds the type check.
---
fixes https://github.com/rust-lang/rust/issues/131102
supercedes https://github.com/rust-lang/rust/pull/136130
r? `@oli-obk`
cc `@FedericoBruzzone` `@BoxyUwU`
tests: Skip const OOM tests on aarch64-unknown-linux-gnu
Skip const OOM tests on AArch64 Linux through explicit annotations instead of inside opt-dist.
Intended to avoid confusion in cases like #135952.
Prerequisite for https://github.com/rust-lang/rust/pull/135960.
r? `@Kobzol`
cc `@workingjubilee`
try-job: dist-aarch64-linux
Implement `int_from_ascii` (#134821)
Provides unstable `T::from_ascii()` and `T::from_ascii_radix()` for integer types `T`, as drafted in tracking issue #134821.
To deduplicate documentation without additional macros, implementations of `isize` and `usize` no longer delegate to equivalent integer types. After #132870 they are inlined anyway.
Skip const OOM tests on AArch64 Linux through explicit annotations
instead of inside opt-dist.
Intended to avoid confusion in cases like #135952.
Prerequisite for https://github.com/rust-lang/rust/pull/135960.
Lower index bounds checking to `PtrMetadata`, this time with the right fake borrow semantics 😸
Change `Rvalue::RawRef` to take a `RawRefKind` instead of just a `Mutability`. Then introduce `RawRefKind::FakeForPtrMetadata` and use that for lowering index bounds checking to a `PtrMetadata`. This new `RawRefKind::FakeForPtrMetadata` acts like a shallow fake borrow in borrowck, which mimics the semantics of the old `Rvalue::Len` operation we're replacing.
We can then use this `RawRefKind` instead of using a span desugaring hack in CTFE.
cc ``@scottmcm`` ``@RalfJung``
Implement `needs-subprocess` directive, and cleanup a bunch of tests to use `needs-{subprocess,threads}`
### Summary
Closes#128295.
- Implements `//@ needs-subprocess` directive in compiletest as requested in #128295. However, compiletest is a host tool, so we can't just try to spawn process because that spawns the process on *host*, not the *target*, under cross-compilation scenarios.
- The short-term solution is to add *Yet Another* list of allow-list targets.
- The long-term solution is to first check if a `$target` supports std, then try to run a binary to do run-time capability detection *on the target*. But that is tricky because you have to build-and-run a binary *for the target*.
- This PR picks the short-term solution, because the long-term solution is highly non-trivial, and it's already an improvement over individual `ignore-*`s all over the place.
- Opened an issue about the long-term solution in #135928.
- Documents `//@ needs-subprocess` in rustc-dev-guide.
- Replace `ignore-{wasm,wasm32,emscripten,sgx}` with `needs-{subprocess,threads}` where suitable in tests.
- Some drive-by test changes as I was trying to figure out if I could use `needs-{subprocess,threads}` and found some bits needlessly distracting.
Count of tests that use `ignore-{wasm,wasm32,emscripten,sgx}` before and after this PR:
| State | `ignore-sgx` | `ignore-wasm` | `ignore-emscripten` |
| - | - | - | - |
| Before this PR | 96 | 88 | 207 |
| After this PR | 36 | 38 | 61 |
<details>
<summary>Commands used to find out locally</summary>
```
--- before
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-sgx" tests | wc -l
96
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-wasm" tests | wc -l
88
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-emscripten" tests | wc -l
207
--- after
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-sgx" tests | wc -l
36
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-wasm" tests | wc -l
38
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-emscripten" tests | wc -l
61
```
</details>
### Review advice
- Best reviewed commit-by-commit.
- Non-trivial test changes (not mechanically simple replacements) are split into individual commits to help with review. Their individual commit messages give some basic description of the changes.
- I *could* split some test changes out into another PR, but I found that I needed to change some tests to `needs-threads`, some to `needs-subprocess`, and some needed to use *both*, so they might conflict and become very annoying.
---
r? ``@ghost`` (need to run try jobs)
try-job: x86_64-msvc-1
try-job: i686-msvc-1
try-job: i686-mingw
try-job: x86_64-mingw-1
try-job: x86_64-apple-1
try-job: aarch64-apple
try-job: aarch64-gnu
try-job: test-various
try-job: armhf-gnu
Implement `ByteStr` and `ByteString` types
Approved ACP: https://github.com/rust-lang/libs-team/issues/502
Tracking issue: https://github.com/rust-lang/rust/issues/134915
These types represent human-readable strings that are conventionally,
but not always, UTF-8. The `Debug` impl prints non-UTF-8 bytes using
escape sequences, and the `Display` impl uses the Unicode replacement
character.
This is a minimal implementation of these types and associated trait
impls. It does not add any helper methods to other types such as `[u8]`
or `Vec<u8>`.
I've omitted a few implementations of `AsRef`, `AsMut`, and `Borrow`,
when those would be the second implementation for a type (counting the
`T` impl), to avoid potential inference failures. We can attempt to add
more impls later in standalone commits, and run them through crater.
In addition to the `bstr` feature, I've added a `bstr_internals` feature
for APIs provided by `core` for use by `alloc` but not currently
intended for stabilization.
This API and its implementation are based *heavily* on the `bstr` crate
by Andrew Gallant (`@BurntSushi).`
r? `@BurntSushi`
