detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
Improve UdpSocket documentation
I tried working with `UdpSocket` and ran into `EINVAL` errors with no clear indication of what causes the error. Also, it was uncharacteristically hard to figure this module out, compared to other Rust `std` modules.
1. `send` and `send_to` return a `usize` This one is just clarity. Usually, returned `usize`s indicate that the buffer might have only been sent partially. This is not the case with UDP. Since that `usize` must always be `buffer.len()`, I have documented that.
2. `bind` limits `connect` and `send_to` When you bind to a limited address space like localhost, you can only `connect` to addresses in that same address space. Error kind: `AddrNotAvailable`.
3. `connect`ing to localhost locks you to localhost On Linux, if you first `connect` to localhost, subsequent `connect`s to
non-localhost addresses fail. Error kind: `InvalidInput`.
For debugging the third one, it was really hard to find someone else who already had that problem. I only managed to find this thread: https://www.mail-archive.com/netdev@vger.kernel.org/msg159519.html
I tried working with `UdpSocket` and ran into `EINVAL` errors with no
clear indication of what causes the error. Also, it was uncharacteristically
hard to figure this module out, compared to other Rust `std` modules.
1. `send` and `send_to` return a `usize`
This one is just clarity. Usually, returned `usize`s indicate that the
buffer might have only been sent partially. This is not the case with
UDP. Since that `usize` must always be `buffer.len()`, I have documented
that.
2. `bind` limits `connect` and `send_to`
When you bind to a limited address space like localhost, you can only
`connect` to addresses in that same address space. Error kind:
`AddrNotAvailable`.
3. `connect`ing to localhost locks you to localhost
On Linux, if you first `connect` to localhost, subsequent `connect`s to
non-localhost addresses fail. Error kind: `InvalidInput`.
Co-authored-by: Jubilee <46493976+workingjubilee@users.noreply.github.com>
Implement read_buf for TcpStream, Stdin, StdinLock, ChildStdout,
ChildStderr (and internally for AnonPipe, Handle, Socket), so
that it skips buffer initialization.
The other provided methods like read_to_string and read_to_end are
implemented in terms of read_buf and so benefit from the optimization
as well.
This commit also implements read_vectored and is_read_vectored where
applicable.
Add support for QNX Neutrino to standard library
This change:
- adds standard library support for QNX Neutrino (7.1).
- upgrades `libc` to version `0.2.139` which supports QNX Neutrino
`@gh-tr`
⚠️ Backtraces on QNX require https://github.com/rust-lang/backtrace-rs/pull/507 which is not yet merged! (But everything else works without these changes) ⚠️
Tested mainly with a x86_64 virtual machine (see qnx-nto.md) and partially with an aarch64 hardware (some tests fail due to constrained resources).
`IN6ADDR_ANY_INIT` and `IN6ADDR_LOOPBACK_INIT` documentation.
Added documentation for IPv6 Addresses `IN6ADDR_ANY_INIT` also known as `in6addr_any` and `IN6ADDR_LOOPBACK_INIT` also known as `in6addr_loopback` similar to `INADDR_ANY` for IPv4 Addresses.
Added documentation for IPv6 Addresses `IN6ADDR_ANY_INIT` also known as
`in6addr_any` and `IN6ADDR_LOOPBACK_INIT` also known as
`in6addr_loopback` similar to `INADDR_ANY` for IPv4 Addresses.
Support parsing IP addresses from a byte string
Fixes#94821
The goal is to be able to parse addresses from a byte string without requiring to do any utf8 validation. Since internally the parser already works on byte strings, this should be possible and I personally already needed this in the past too.
~~I used the proposed approach from the issue by implementing `TryFrom<&'a [u8]>` for all 6 address types (3 ip address types and 3 socket address types). I believe implementing stable traits for stable types is insta-stable so this will probably need an FCP?~~
Switched to an unstable inherent method approach called `parse_ascii` as requested.
cc ``````@jyn514``````
Rework Ipv6Addr::is_global to check for global reachability rather than global scope - rebase
Rebasing of pull request #86634 off of master to try and get the feature "ip" stabilized.
I also found a test failure in the rebase that is_global was considering the benchmark space to be globally reachable.
This is related to my other rebasing pull request #99947
Implement network primitives with ideal Rust layout, not C system layout
This PR is the result of this internals forum thread: https://internals.rust-lang.org/t/why-are-socketaddrv4-socketaddrv6-based-on-low-level-sockaddr-in-6/13321.
Instead of basing `std:::net::{Ipv4Addr, Ipv6Addr, SocketAddrV4, SocketAddrV6}` on system (C) structs, they are encoded in a more optimal and idiomatic Rust way.
This changes the public API of std by introducing structural equality impls for all four types here, which means that `match ipv4addr { SOME_CONSTANT => ... }` will now compile, whereas previously this was an error. No other intentional changes are introduced to public API.
It's possible to observe the current layout of these types (e.g., by pointer casting); most but not all libraries which were found by Crater to do this have had updates issued and affected versions yanked. See report below.
### Benefits of this change
- It will become possible to move these fundamental network types from `std` into `core` ([RFC](https://github.com/rust-lang/rfcs/pull/2832)).
- Some methods that can't be made `const fn`s today can be made `const fn`s with this change.
- `SocketAddrV4` only occupies 6 bytes instead of 16 bytes.
- These simple primitives become easier to read and uses less `unsafe`.
- Makes these types support structural equality, which means you can now (for instance) match an `Ipv4Addr` against a constant
### ~Remaining~ Previous problems
This change obviously changes the memory layout of the types. And it turns out some libraries invalidly assumes the memory layout and does very dangerous pointer casts to convert them. These libraries will have undefined behaviour and perform invalid memory access until patched.
- [x] - `mio` - Issue: https://github.com/tokio-rs/mio/issues/1386.
- [x] `0.7` branch https://github.com/tokio-rs/mio/pull/1388
- [x] `0.7.6` published https://github.com/tokio-rs/mio/pull/1398
- [x] Yank all `0.7` versions older than `0.7.6`
- [x] Report `<0.7.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0081.html
- [x] - `socket2` - Issue: https://github.com/rust-lang/socket2-rs/issues/119.
- [x] `0.3.x` branch https://github.com/rust-lang/socket2-rs/pull/120
- [x] `0.3.16` published
- [x] `master` branch https://github.com/rust-lang/socket2-rs/pull/122
- [x] Yank all `0.3` versions older than `0.3.16`
- [x] Report `<0.3.16` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0079.html
- [x] - `net2` - Issue: https://github.com/deprecrated/net2-rs/issues/105
- [x] https://github.com/deprecrated/net2-rs/pull/106
- [x] `0.2.36` published
- [x] Yank all `0.2` versions older than `0.2.36`
- [x] Report `<0.2.36` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0078.html
- [x] - `miow` - Issue: https://github.com/yoshuawuyts/miow/issues/38
- [x] `0.3.x` - https://github.com/yoshuawuyts/miow/pull/39
- [x] `0.3.6` published
- [x] `0.2.x` - https://github.com/yoshuawuyts/miow/pull/40
- [x] `0.2.2` published
- [x] Yanked all `0.2` versions older than `0.2.2`
- [x] Yanked all `0.3` versions older than `0.3.6`
- [x] Report `<0.2.2` and `<0.3.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0080.html
- [x] - `quinn master` (aka what became 0.7) - https://github.com/quinn-rs/quinn/issues/968https://github.com/quinn-rs/quinn/pull/987
- [x] - `quinn 0.6` - https://github.com/quinn-rs/quinn/pull/1045
- [x] - `quinn 0.5` - https://github.com/quinn-rs/quinn/pull/1046
- [x] - Release `0.7.0`, `0.6.2` and `0.5.4`
- [x] - `nb-connect` - https://github.com/smol-rs/nb-connect/issues/1
- [x] - Release `1.0.3`
- [x] - Yank all versions older than `1.0.3`
- [x] - `shadowsocks-rust` - https://github.com/shadowsocks/shadowsocks-rust/issues/462
- [ ] - `rio` - https://github.com/spacejam/rio/issues/44
- [ ] - `seaslug` - https://github.com/spacejam/seaslug/issues/1
#### Fixed crate versions
All crates I have found that assumed the memory layout have been fixed and published. The crates and versions that will continue working even as/if this PR is merged is (please upgrade these to help unblock this PR):
* `net2 0.2.36`
* `socket2 0.3.16`
* `miow 0.2.2`
* `miow 0.3.6`
* `mio 0.7.6`
* `mio 0.6.23` - Never had the invalid assumption itself, but has now been bumped to only allow fixed dependencies (`net2` + `miow`)
* `nb-connect 1.0.3`
* `quinn 0.5.4`
* `quinn 0.6.2`
### Release notes draft
This release changes the memory layout of `Ipv4Addr`, `Ipv6Addr`, `SocketAddrV4` and `SocketAddrV6`. The standard library no longer implements these as the corresponding `libc` structs (`sockaddr_in`, `sockaddr_in6` etc.). This internal representation was never exposed, but some crates relied on it anyway by unsafely transmuting. This change will cause those crates to make invalid memory accesses. Notably `net2 <0.2.36`, `socket2 <0.3.16`, `mio <0.7.6`, `miow <0.3.6` and a few other crates are affected. All known affected crates have been patched and have had fixed versions published over a year ago. If any affected crate is still in your dependency tree, you need to upgrade them before using this version of Rust.
Implement `FusedIterator` for `std::net::[Into]Incoming`
They never return `None`, so they trivially fulfill the contract.
What should I put for the stability attribute of `Incoming`?
