This pair of fn was introduced to perform invariant checks for scalars.
Their current behavior doesn't mesh as well with checking SIMD types,
so change the name of the fn to reflect their actual use-case and
refactor the corresponding checks.
Also simplify the returns from Option<AbiAndPrefAlign> to Option<Align>,
because every site was mapping away the "preferred" alignment anyways.
The target feature names are, right now, based on the llvm target feature names. These mostly line up well with the names of [Facility Inidications](https://publibfp.dhe.ibm.com/epubs/pdf/a227832d.pdf#page=301) names. The linux kernel uses shorter, more cryptic names. (e.g. "vector" is `vx`). We can deviate from the llvm names, but the CPU vendor (IBM) does not appear to use e.g. `vx` for what they call `vector`.
There are a number of implied target features between the vector facilities (based on the [Facility Inidications](https://publibfp.dhe.ibm.com/epubs/pdf/a227832d.pdf#page=301) table):
- 129 The vector facility for z/Architecture is installed in the z/Architecture architectural mode.
- 134 The vector packed decimal facility is installed in the z/Architecture architectural mode. When bit 134 is one, bit 129 is also one.
- 135 The vector enhancements facility 1 is installed in the z/Architecture architectural mode. When bit 135 is one, bit 129 is also one.
- 148 The vector-enhancements facility 2 is installed in the z/Architecture architectural mode. When bit 148 is one, bits 129 and 135 are also one.
- 152 The vector-packed-decimal-enhancement facility 1 is installed in the z/Architecture architectural mode. When bit 152 is one, bits 129 and 134 are also one.
- 165 The neural-network-processing-assist facility is installed in the z/Architecture architectural mode. When bit 165 is one, bit 129 is also one.
- 192 The vector-packed-decimal-enhancement facility 2 is installed in the z/Architecture architectural mode. When bit 192 is one, bits 129, 134, and 152 are also one.
And then there are a number of facilities without any implied target features
- 45 The distinct-operands, fast-BCR-serialization, high-word, and population-count facilities, the interlocked-access facility 1, and the load/store-oncondition facility 1 are installed in the z/Architecture architectural mode.
- 73 The transactional-execution facility is installed in the z/Architecture architectural mode. Bit 49 is one when bit 73 is one.
- 133 The guarded-storage facility is installed in the z/Architecture architectural mode.
- 150 The enhanced-sort facility is installed in the z/Architecture architectural mode.
- 151 The DEFLATE-conversion facility is installed in the z/Architecture architectural mode.
The added target features are those that have ISA implications, can be queried at runtime, and have LLVM support. LLVM [defines more target features](d49a2d2bc9/llvm/lib/Target/SystemZ/SystemZFeatures.td), but I'm not sure those are useful. They can always be added later, and can already be set globally using `-Ctarget-feature`.
Make x86 QNX target name consistent with other Rust targets
Rename target to be consistent with other Rust targets: Use `i686` instead of `i586`
See also
- #136495
- #109173
CC: `@jonathanpallant` `@japaric` `@gh-tr` `@samkearney`
Workaround Cranelift not yet properly supporting vectors smaller than 128bit
While it would technically be possible to workaround this in cg_clif, it quickly becomes very messy and would likely cause correctness issues. Working around it in rustc instead is much simper and won't have any negative impact for code running on stable as vectors smaller than 128bit can only be made on nightly using core::simd or #[repr(simd)].
Do not ignore uninhabited types for function-call ABI purposes. (Remove BackendRepr::Uninhabited)
Accepted MCP: https://github.com/rust-lang/compiler-team/issues/832Fixes#135802
Do not consider the inhabitedness of a type for function call ABI purposes.
* Remove the [`rustc_abi::BackendRepr::Uninhabited`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_abi/enum.BackendRepr.html) variant
* Instead calculate the `BackendRepr` of uninhabited types "normally" (as though they were not uninhabited "at the top level", but still considering inhabitedness of variants to determine enum layout, etc)
* Add an `uninhabited: bool` field to [`rustc_abi::LayoutData`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_abi/struct.LayoutData.html) so inhabitedness of a `LayoutData` can still be queried when necessary (e.g. when determining if an enum variant needs a tag value allocated to it).
This should not affect type layouts (size/align/field offset); this should only affect function call ABI, and only of uninhabited types.
cc ``@RalfJung``
Pass through of target features to llvm-bitcode-linker and handling them
When using the llvm-bitcode-linker (`linker-flavor=llbc`) target-features are not passed through and are not handled by it.
The llvm-bitcode-linker is mainly used as a self contained linker to link llvm bitcode for the nvptx64 target. It uses `llvm-link`, `opt` and `llc` internally. To produce a `.ptx` file of a specific ptx-version it is necessary to pass the version to llc with the `--mattr` option. Without explicitly setting it, the emitted `.ptx`-version is the minimum supported version of the `--target-cpu`.
I would like to be able to explicitly set the ptx version as [some llvm problems only occur in earlier `.ptx`-versions](https://github.com/llvm/llvm-project/issues/112998).
Therefore this pull request adds support for passing target features to llvm-bitcode-linker and handling them.
I was not quite sure if adding these features to `rustc_target/src/target_features.rs` is necessary or not. If so I will gladly add these.
r? ``@kjetilkjeka``
infer linker flavor by linker name if it's sufficiently specific
Fix: `rustc` does not infer `llvm-bitcode-linker` uses `llbc` linker flavor if targeting `nvptx64-nvidia-cuda`.
Create a generic AVR target: avr-none
This commit removes the `avr-unknown-gnu-atmega328` target and replaces it with a more generic `avr-none` variant that must be specialized using `-C target-cpu` (e.g. `-C target-cpu=atmega328p`).
Seizing the day, I'm adding myself as the maintainer of this target - I've been already fixing the bugs anyway, might as well make it official 🙂
Related discussions:
- https://github.com/rust-lang/rust/pull/131171
- https://github.com/rust-lang/compiler-team/issues/800
try-job: x86_64-gnu-debug
The comments didn't make much sense to me. I asked Matthew Jasper on
Zulip about it and they said:
> I think that at the time I wanted to replace all (or most of) this
> with a reference to the HIR Id of the variable. I'll give this a look
> to see if it's still a reasonable idea, but removing the comments is
> fine.
and then:
> I don't think that changing this to an HirId would be better,
> recovering the information from the HIR seems like too much effort in
> exchange for making the MIR a little smaller.
Fix codegen of uninhabited PassMode::Indirect return types.
Add codegen test for uninhabited PassMode::Indirect return types.
Enable optimizations for uninhabited return type codegen test
This updates the Fuchsia target spec with the [Clang Fuchsia driver],
which picks up a few changes:
* Adds `-z start-stop-visibility=hidden` and `-z rel` to the pre link
arguments.
* Adds `--execute-only` and `--fix-cortex-a53-843419` for
`aarch64-unknown-fuchsia`.
* Enables the cpu features equivalent to x86-64-v2 for
`x86_64-unknown-fuchsia`, which is our minimum supported x86_64.
platform according to [RFC-0073].
* Enables the cpu features `+crc,+aes,+sha2,+neon` on aarch64.
* Increases the max atomic width on 86_64 to 128.
* Enables stack probes and xray on aarch64 and riscv64.
[Clang Fuchsia driver]: 8374d42186/clang/lib/Driver/ToolChains/Fuchsia.cpp
[RFC-0073]: https://fuchsia.dev/fuchsia-src/contribute/governance/rfcs/0073_x86_64_platform_requirement
When a `?` operation requires an `Into` conversion with additional bounds (like having a concrete error but wanting to convert to a trait object), we handle it speficically and provide the same kind of information we give other `?` related errors.
```
error[E0277]: `?` couldn't convert the error: `E: std::error::Error` is not satisfied
--> $DIR/bad-question-mark-on-trait-object.rs:5:13
|
LL | fn foo() -> Result<(), Box<dyn std::error::Error>> {
| -------------------------------------- required `E: std::error::Error` because of this
LL | Ok(bar()?)
| ^ the trait `std::error::Error` is not implemented for `E`
|
= note: the question mark operation (`?`) implicitly performs a conversion on the error value using the `From` trait
= note: required for `Box<dyn std::error::Error>` to implement `From<E>`
```
Avoid talking about `FromResidual` when other more relevant information is being given, particularly from `rust_on_unimplemented`.
While it would technically be possible to workaround this in cg_clif, it
quickly becomes very messy and would likely cause correctness issues.
Working around it in rustc instead is much simper and won't have any
negative impact for code running on stable as vectors smaller than
128bit can only be made on nightly using core::simd or #[repr(simd)].
Don't store a redundant span in user-type projections
While experimenting with some larger changes, I noticed that storing this span here is unnecessary, because it is also present in the corresponding `CanonicalUserTypeAnnotation` and can be retrieved via the annotation's ID.
Emit `trunc nuw` for unchecked shifts and `to_immediate_scalar`
- For shifts this shrinks the IR by no longer needing an `assume` while still providing the UB information
- Having this on the `i8`→`i1` truncations will hopefully help with some places that have to load `i8`s or pass those in LLVM structs without range information
I had to do a lot of debug by printing; having these `Debug` traits in
place made it easier. Additionally, add some more information to
existing `info!` statements.
Introduce an enum that represents the different possible sources for
dependencies, and use them where possible. This will enable more fine
grained control and provides better context than passing the `dep_root`
tuple.
Use this to ensure that injected crates always show up as private by
default.
