Because MIPSr6 has many differences with previous MIPSr2 arch, the previous rlib metadata stripping code in `rustc_codegen_ssa` is only for MIPSr2/r3/r5 (which share the same elf e_flags).
This commit fixed this problem. It makes `rustc_codegen_ssa` happy when compiling rustc for MIPSr6 target or hosts.
`thorin` is a Rust implementation of a DWARF packaging utility that
supports reading DWARF objects from archive files (i.e. rlibs) and
therefore is better suited for integration into rustc.
Signed-off-by: David Wood <david.wood@huawei.com>
In #79570, `-Z split-dwarf-kind={none,single,split}` was replaced by `-C
split-debuginfo={off,packed,unpacked}`. `-C split-debuginfo`'s packed
and unpacked aren't exact parallels to single and split, respectively.
On Unix, `-C split-debuginfo=packed` will put debuginfo into object
files and package debuginfo into a DWARF package file (`.dwp`) and
`-C split-debuginfo=unpacked` will put debuginfo into dwarf object files
and won't package it.
In the initial implementation of Split DWARF, split mode wrote sections
which did not require relocation into a DWARF object (`.dwo`) file which
was ignored by the linker and then packaged those DWARF objects into
DWARF packages (`.dwp`). In single mode, sections which did not require
relocation were written into object files but ignored by the linker and
were not packaged. However, both split and single modes could be
packaged or not, the primary difference in behaviour was where the
debuginfo sections that did not require link-time relocation were
written (in a DWARF object or the object file).
This commit re-introduces a `-Z split-dwarf-kind` flag, which can be
used to pick between split and single modes when `-C split-debuginfo` is
used to enable Split DWARF (either packed or unpacked).
Signed-off-by: David Wood <david.wood@huawei.com>
Actually set IMAGE_SCN_LNK_REMOVE for .rmeta
The code intended to set the IMAGE_SCN_LNK_REMOVE flag for the
.rmeta section, however the value of this flag was set to zero.
Instead use the actual value provided by the object crate.
This dates back to the original introduction of this code in
PR #84449, so we were never setting this flag. As I'm not on
Windows, I'm not sure whether that means we were embedding .rmeta
into executables, or whether the section ended up getting stripped
for some other reason.
Allow loading LLVM plugins with both legacy and new pass manager
Opening a draft PR to get feedback and start discussion on this feature. There is already a codegen option `passes` which allow giving a list of LLVM pass names, however we currently can't use a LLVM pass plugin (as described here : https://llvm.org/docs/WritingAnLLVMPass.html), the only available passes are the LLVM built-in ones.
The proposed modification would be to add another codegen option `pass-plugins`, which can be set with a list of paths to shared library files. These libraries are loaded using the LLVM function `PassPlugin::Load`, which calls the expected symbol `lvmGetPassPluginInfo`, and register the pipeline parsing and optimization callbacks.
An example usage with a single plugin and 3 passes would look like this in the `.cargo/config`:
```toml
rustflags = [
"-C", "pass-plugins=/tmp/libLLVMPassPlugin",
"-C", "passes=pass1 pass2 pass3",
]
```
This would give the same functionality as the opt LLVM tool directly integrated in rust build system.
Additionally, we can also not specify the `passes` option, and use a plugin which inserts passes in the optimization pipeline, as one could do using clang.
The code intended to set the IMAGE_SCN_LNK_REMOVE flag for the
.rmeta section, however the value of this flag was set to zero.
Instead use the actual value provided by the object crate.
This dates back to the original introduction of this code in
PR #84449, so we were never setting this flag. As I'm not on
Windows, I'm not sure whether that means we were embedding .rmeta
into executables, or whether the section ended up getting stripped
for some other reason.
Explicitly set no ELF flags for .rustc section
For a data section, the object crate will set the SHF_ALLOC by default, which is exactly what we don't want. Explicitly set sh_flags to zero to avoid this.
I checked with `objdump -h` that this produces the right flags for ELF.
Fixes#92013.
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
Rollup of 7 pull requests
Successful merges:
- #91566 (Apply path remapping to DW_AT_GNU_dwo_name when producing split DWARF)
- #91926 (Remove `in_band_lifetimes` from `rustc_metadata`)
- #91931 (Remove `in_band_lifetimes` from `rustc_codegen_llvm`)
- #92024 (rustc_codegen_llvm: Give each codegen unit a unique DWARF name on all platforms, not just Apple ones.)
- #92037 (Use a const ParamEnv when in default_method_body_is_const)
- #92047 (Set `RUST_BACKTRACE=0` when running location-detail tests)
- #92050 (Add a space and 2 grave accents )
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
For a data section, the object crate will set the SHF_ALLOC by
default, which is exactly what we don't want. Explicitly set
sh_flags to zero to avoid this.
Apply path remapping to DW_AT_GNU_dwo_name when producing split DWARF
`--remap-path-prefix` doesn't apply to paths to `.o` (in case of packed) or `.dwo` (in case of unpacked) files in `DW_AT_GNU_dwo_name`. GCC also has this bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91888
DF_ORIGIN flag signifies that the object being loaded may make reference to the $ORIGIN substitution string.
Some implementations are just ignoring DF_ORIGIN and do substitution for $ORIGIN if present (whatever DF_ORIGIN pr
Set the flag inconditionally if rpath is wanted.
Remove `in_band_lifetimes` from `rustc_codegen_ssa`
See #91867 for more information.
In `compiler/rustc_codegen_ssa/src/coverageinfo/map.rs`, there are several functions with an explicit `'a` lifetime but only a single `&'a self` parameter. These lifetimes should be redundant given lifetime elision, unless the existential `impl Iterator` has weird issues regarding that. Should the redundant lifetimes be removed?
We already use the object crate for generating uncompressed .rmeta
metadata object files. This switches the generation of compressed
.rustc object files to use the object crate as well. These have
slightly different requirements in that .rmeta should be completely
excluded from any final compilation artifacts, while .rustc should
be part of shared objects, but not loaded into memory.
The primary motivation for this change is #90326: In LLVM 14, the
current way of setting section flags (and in particular, preventing
the setting of SHF_ALLOC) will no longer work. There are other ways
we could work around this, but switching to the object crate seems
like the most elegant, as we already use it for .rmeta, and as it
makes this independent of the codegen backend. In particular, we
don't need separate handling in codegen_llvm and codegen_gcc.
codegen_cranelift should be able to reuse the implementation as
well, though I have omitted that here, as it is not based on
codegen_ssa.
This change mostly extracts the existing code for .rmeta handling
to allow using it for .rustc as well, and adjust the codegen
infrastructure to handle the metadata object file separately: We
no longer create a backend-specific module for it, and directly
produce the compiled module instead.
This does not fix#90326 by itself yet, as .llvmbc will need to be
handled separately.
Fix ld64 flags
- The `-exported_symbols_list` argument appears to be malformed for `ld64` (if you are not going through `clang`).
- The `-dynamiclib` argument isn't support for `ld64`. It should be guarded behind a compiler flag.
These problems are fixed by these changes. I have also refactored the way linker arguments are generated to be ld/compiler agnostic and therefore less error prone.
These changes are necessary to support cross-compilation to darwin targets.
Leave -Z strip available temporarily as an alias, to avoid breaking
cargo until cargo transitions to using -C strip. (If the user passes
both, the -C version wins.)
This commit refactors linker argument generation to leverage a helper
function that abstracts away details governing how these arguments are
transformed and provided to the linker.
This fixes the misuse of the `-exported_symbols_list` when an ld-like
linker is used rather than a compiler. A compiler would expect
`-Wl,-exported_symbols_list,path` but ld would expect
`-exported_symbols_list` and `path` as two seperate arguments. Prior
to this change, an ld-like linker was given
`-exported_symbols_list,path`.
Linker arguments must transformed when Rust is interacting with the
linker through a compiler. This commit introduces a helper function
that abstracts away details of this transformation.
Record more artifact sizes during self-profiling.
This PR adds artifact size recording for
- "linked artifacts" (executables, RLIBs, dylibs, static libs)
- object files
- dwo files
- assembly files
- crate metadata
- LLVM bitcode files
- LLVM IR files
- codegen unit size estimates
Currently the identifiers emitted for these are hard-coded as string literals. Is it worth adding constants to https://github.com/rust-lang/measureme/blob/master/measureme/src/rustc.rs instead? We don't do that for query names and the like -- but artifact kinds might be more stable than query names.
Don't abort compilation after giving a lint error
The only reason to use `abort_if_errors` is when the program is so broken that either:
1. later passes get confused and ICE
2. any diagnostics from later passes would be noise
This is never the case for lints, because the compiler has to be able to deal with `allow`-ed lints.
So it can continue to lint and compile even if there are lint errors.
Closes https://github.com/rust-lang/rust/issues/82761. This is a WIP because I have a feeling it will exit with 0 even if there were lint errors; I don't have a computer that can build rustc locally at the moment.
The only reason to use `abort_if_errors` is when the program is so broken that either:
1. later passes get confused and ICE
2. any diagnostics from later passes would be noise
This is never the case for lints, because the compiler has to be able to deal with `allow`-ed lints.
So it can continue to lint and compile even if there are lint errors.
In https://reviews.llvm.org/D71059 LLVM 11, the time trace profiler was
extended to support multiple threads.
`timeTraceProfilerInitialize` creates a thread local profiler instance.
When a thread finishes `timeTraceProfilerFinishThread` moves a thread
local instance into a global collection of instances. Finally when all
codegen work is complete `timeTraceProfilerWrite` writes data from the
current thread local instance and the instances in global collection
of instances.
Previously, the profiler was intialized on a single thread only. Since
this thread performs no code generation on its own, the resulting
profile was empty.
Update LLVM codegen to initialize & finish time trace profiler on each
code generation thread.
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
rustc_driver: Enable the `WARN` log level by default
This commit changes the `tracing_subscriber` initialization in
`rustc_driver` so that the `WARN` verbosity level is enabled by default
when the `RUSTC_LOG` env variable is empty. If the `RUSTC_LOG` env
variable is set, the filter string in the environment variable is
honored, instead.
Fixes#76824Closes#89623
cc ``@eddyb,`` ``@oli-obk``
On macOS, make strip="symbols" not pass any options to strip
This makes the output with `strip="symbols"` match the result of just
calling `strip` on the output binary, minimizing the size of the binary.
This largely involves implementing the options debug-info-for-profiling
and profile-sample-use and forwarding them on to LLVM.
AutoFDO can be used on x86-64 Linux like this:
rustc -O -Cdebug-info-for-profiling main.rs -o main
perf record -b ./main
create_llvm_prof --binary=main --out=code.prof
rustc -O -Cprofile-sample-use=code.prof main.rs -o main2
Now `main2` will have feedback directed optimization applied to it.
The create_llvm_prof tool can be obtained from this github repository:
https://github.com/google/autofdoFixes#64892.
Fix handling of +whole-archive native link modifier.
This PR fixes a bug in `add_upstream_native_libraries` that led to the `+whole-archive` modifier being ignored when linking in native libs.
~~Note that the PR does not address the situation when `+whole-archive` is combined with `+bundle`.~~
`@wesleywiser's` commit adds validation code that turns combining `+whole-archive` with `+bundle` into an error.
Fixes https://github.com/rust-lang/rust/issues/88085.
r? `@petrochenkov`
cc `@wesleywiser` `@gcoakes`
