Use MIR's `Offset` for pointer `add` too
~~Status: draft while waiting for #110822 to land, since this is built atop that.~~
~~r? `@ghost~~`
Canonical Rust code has mostly moved to `add`/`sub` on pointers, which take `usize`, instead of `offset` which takes `isize`. (And, relatedly, when `sub_ptr` was added it turned out it replaced every single in-tree use of `offset_from`, because `usize` is just so much more useful than `isize` in Rust.)
Unfortunately, `intrinsics::offset` could only accept `*const` and `isize`, so there's a *huge* amount of type conversions back and forth being done. They're identity conversions in the backend, but still end up producing quite a lot of unhelpful MIR.
This PR changes `intrinsics::offset` to accept `*const` *and* `*mut` along with `isize` *and* `usize`. Conveniently, the backends and CTFE already handle this, since MIR's `BinOp::Offset` [already supports all four combinations](adaac6b166/compiler/rustc_const_eval/src/transform/validate.rs (L523-L528)).
To demonstrate the difference, I added some `mir-opt/pre-codegen/` tests around slice indexing. Here's the difference to `[T]::get_mut`, since it uses `<*mut _>::add` internally:
```diff
`@@` -79,30 +70,21 `@@` fn slice_get_mut_usize(_1: &mut [u32], _2: usize) -> Option<&mut u32> {
StorageLive(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageLive(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
_9 = _8 as *mut u32 (PtrToPtr); // scope 11 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _13 = _2 as isize (IntToInt); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _15 = _9 as *const u32 (Pointer(MutToConstPointer)); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _14 = Offset(move _15, _13); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _7 = move _14 as *mut u32 (PtrToPtr); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
+ _7 = Offset(_9, _2); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
StorageDead(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_11); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
```
1c1c8e442a (diff-a841b6a4538657add3f39bc895744331453d0625e7aace128b1f604f0b63c8fdR80)
I was curious about how many `Encodable`/`Decodable` derives we have.
Some grepping revealed that it's over 500 of each, but the number of
`Encodable` ones was higher, which was weird. Most of the
`Encodable`-only ones were in `hir.rs`. This commit removes them all,
plus some other unnecessary derives in that file and others that I found
via trial and error.
Checking that `read_raw_bytes(len)` changes the position by `len` is a
reasonable thing for a test, but isn't much use in just one of the
zillion `Decodable` impls.
Add some missing built-in lints
(and also sort them, so this is best reviewed one commit at a time)
Fixes#110911
I wonder if there's a good way to detect when a lint is built-in (i.e. not associated to a lint pass). If so, it needs to be added to this list, or else we're unable to `allow` or `deny` it. Leaving that for future work, I guess...
Migrate trivially translatable `rustc_parse` diagnostics
cc #100717
Migrate diagnostics in `rustc_parse` which are emitted in a single statement. I worked on this by expanding the lint introduced in #108760, although that isn't included here as there is much more work to be done to satisfy it
More core::fmt::rt cleanup.
- Removes the `V1` suffix from the `Argument` and `Flag` types.
- Moves more of the format_args lang items into the `core::fmt::rt` module. (The only remaining lang item in `core::fmt` is `Arguments` itself, which is a public type.)
Part of https://github.com/rust-lang/rust/issues/99012
Follow-up to https://github.com/rust-lang/rust/pull/110616
Fixes https://github.com/rust-lang/rust/issues/110912
Checking `flavor == RlibFlavor::Normal` was accidentally lost in
601fc8b36bhttps://github.com/rust-lang/rust/pull/105601
That caused combining +whole-archive and +bundle link modifiers on
non-rlib crates to fail with a confusing error message saying that
combination is unstable for rlibs. In particular, this caused the
build to fail when +whole-archive was used on staticlib crates, even
though +whole-archive effectively does nothing on non-bin crates because
the final linker invocation is left to an external build system.
Move the WorkerLocal type from the rustc-rayon fork into rustc_data_structures
This PR moves the definition of the `WorkerLocal` type from `rustc-rayon` into `rustc_data_structures`. This is enabled by the introduction of the `Registry` type which allows you to group up threads to be used by `WorkerLocal` which is basically just an array with an per thread index. The `Registry` type mirrors the one in Rayon and each Rayon worker thread is also registered with the new `Registry`. Safety for `WorkerLocal` is ensured by having it keep a reference to the registry and checking on each access that we're still on the group of threads associated with the registry used to construct it.
Accessing a `WorkerLocal` is micro-optimized due to it being hot since it's used for most arena allocations.
Performance is slightly improved for the parallel compiler:
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.9992s</td><td align="right">1.9949s</td><td align="right"> -0.21%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2977s</td><td align="right">0.2970s</td><td align="right"> -0.22%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">1.1335s</td><td align="right">1.1315s</td><td align="right"> -0.18%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.8235s</td><td align="right">1.8171s</td><td align="right"> -0.35%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">6.9047s</td><td align="right">6.8930s</td><td align="right"> -0.17%</td></tr><tr><td>Total</td><td align="right">12.1586s</td><td align="right">12.1336s</td><td align="right"> -0.21%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9977s</td><td align="right"> -0.23%</td></tr></table>
cc `@SparrowLii`
Nicer ICE for #67981
Provides a slightly nicer ICE for #67981, documenting the problem. A proper fix will be necessary before `#![feature(unsized_fn_params)]` can be stabilized.
The problem is that the design of the `"rust-call"` ABI is fundamentally not compatible with `unsized_fn_params`. `"rust-call"` functions need to collect their arguments into a tuple, but if the arguments are not `Sized`, said tuple is potentially not even a valid type—and if it is, it requires `alloca` to create.
``@rustbot`` label +A-abi +A-codegen +F-unboxed_closures +F-unsized_fn_params
`IntoFuture::into_future` is no longer unstable
We don't need to gate the `IntoFuture::into_future` call in `.await` lowering anymore.
``@bors`` rollup
Sprinkle some `#[inline]` in `rustc_data_structures::tagged_ptr`
This is based on `nm --demangle (rustc +a --print sysroot)/lib/librustc_driver-*.so | rg CopyTaggedPtr` which shows many methods that should probably be inlined. May fix the regression in https://github.com/rust-lang/rust/pull/110795.
r? ```@Nilstrieb```
Fixes#35785 by converting non UTF-8 linker output to Unicode using the OEM code page.
Before:
```text
= note: Non-UTF-8 output: LINK : fatal error LNK1181: cannot open input file \'m\x84rchenhaft.obj\'\r\n
```
After:
```text
= note: LINK : fatal error LNK1181: cannot open input file 'märchenhaft.obj'
```
The difference is more dramatic if using a non-ascii language pack for Visual Studio.
Currently it creates an `Option` and then does `map`/`unwrap_or` and
`map_or_else` on it, which is hard to read.
This commit simplifies things by moving more code into the two arms of
the if/else.
