When `Foo.field` or `Foo.method()` exprs are encountered, suggest `Foo::field` or `Foo::method()` when Foo is a type alias, not just
a struct, trait, or module.
Also rename test for this suggestion from issue-22692.rs to something more meaningful.
Pattern Migration 2024: fix incorrect messages/suggestions when errors arise in macro expansions
See the diff between the two commits for how this affected the error message and suggestion. In order to decide how to format those, the pattern migration diagnostic keeps track of which parts of the user's pattern cause problems in Edition 2024. However, it neglected to do some of this bookkeeping when pointing to macro expansion sites. This fixes that.
Do not ICE on default_field_value const with lifetimes
`#![feature(default_field_values)]` uses a `const` body that should be treated as inline `const`s, but is actually being detected otherwise. This is similar to the situation in #78174, so we take the same solution: we check if the const actually comes from a field, and if it does, we use that logic to get the appropriate lifetimes and not ICE during borrowck.
Fix#135649.
Unless `try_trait_v2` is enabled, don't mention that `FromResidual` isn't implemented for a specific type when the implicit `From` conversion of a `?` fails. For the end user on stable, `?` might as well be a compiler intrinsic, so we remove that note to avoid further confusion and allowing other parts of the error to be more prominent.
```
error[E0277]: `?` couldn't convert the error to `u8`
--> $DIR/bad-interconversion.rs:4:20
|
LL | fn result_to_result() -> Result<u64, u8> {
| --------------- expected `u8` because of this
LL | Ok(Err(123_i32)?)
| ------------^ the trait `From<i32>` is not implemented for `u8`
| |
| this can't be annotated with `?` because it has type `Result<_, i32>`
|
= note: the question mark operation (`?`) implicitly performs a conversion on the error value using the `From` trait
= help: the following other types implement trait `From<T>`:
`u8` implements `From<Char>`
`u8` implements `From<bool>`
```
improve cold_path()
#120370 added a new instrinsic `cold_path()` and used it to fix `likely` and `unlikely`
However, in order to limit scope, the information about cold code paths is only used in 2-target switch instructions. This is sufficient for `likely` and `unlikely`, but limits usefulness of `cold_path` for idiomatic rust. For example, code like this:
```
if let Some(x) = y { ... }
```
may generate 3-target switch:
```
switch y.discriminator:
0 => true branch
1 = > false branch
_ => unreachable
```
and therefore marking a branch as cold will have no effect.
This PR improves `cold_path()` to work with arbitrary switch instructions.
Note that for 2-target switches, we can use `llvm.expect`, but for multiple targets we need to manually emit branch weights. I checked Clang and it also emits weights in this situation. The Clang's weight calculation is more complex that this PR, which I believe is mainly because `switch` in `C/C++` can have multiple cases going to the same target.
Instead of `expand_statements`. This makes the code shorter and
consistent with other MIR transform passes.
The tests require updating because there is a slight change in
MIR output:
- the old code replaced the original statement with twelve new
statements.
- the new code inserts converts the original statement to a `nop` and
then insert twelve new statements in front of it.
I.e. we now end up with an extra `nop`, which doesn't matter at all.
Rollup of 7 pull requests
Successful merges:
- #137095 (Replace some u64 hashes with Hash64)
- #137100 (HIR analysis: Remove unnecessary abstraction over list of clauses)
- #137105 (Restrict DerefPure for Cow<T> impl to T = impl Clone, [impl Clone], str.)
- #137120 (Enable `relative-path-include-bytes-132203` rustdoc-ui test on Windows)
- #137125 (Re-add missing empty lines in the releases notes)
- #137145 (use add-core-stubs / minicore for a few more tests)
- #137149 (Remove SSE ABI from i586-pc-windows-msvc)
r? `@ghost`
`@rustbot` modify labels: rollup
use add-core-stubs / minicore for a few more tests
See https://github.com/rust-lang/rust/issues/131485 for context. These are some tests I worked on in the past so I figured I'd see if `minicore` works for them. :)
Enable `relative-path-include-bytes-132203` rustdoc-ui test on Windows
The problem with the error message on Windows is:
- The path separators are different
- The OS error message string is different
Normalizing those two things makes the test pass on Windows.
Replace some u64 hashes with Hash64
I introduced the Hash64 and Hash128 types in https://github.com/rust-lang/rust/pull/110083, essentially as a mechanism to prevent hashes from landing in our leb128 encoding paths. If you just have a u64 or u128 field in a struct then derive Encodable/Decodable, that number gets leb128 encoding. So if you need to store a hash or some other value which behaves very close to a hash, don't store it as a u64.
This reverts part of https://github.com/rust-lang/rust/pull/117603, which turned an encoded Hash64 into a u64.
Based on https://github.com/rust-lang/rust/pull/110083, I don't expect this to be perf-sensitive on its own, though I expect that it may help stabilize some of the small rmeta size fluctuations we currently see in perf reports.
Fix const items not being allowed to be called `r#move` or `r#static`
Because of an ambiguity with const closures, the parser needs to ensure that for a const item, the `const` keyword isn't followed by a `move` or `static` keyword, as that would indicate a const closure:
```rust
fn main() {
const move // ...
}
```
This check did not take raw identifiers into account, therefore being unable to distinguish between `const move` and `const r#move`. The latter is obviously not a const closure, so it should be allowed as a const item.
This fixes the check in the parser to only treat `const ...` as a const closure if it's followed by the *proper keyword*, and not a raw identifier.
Additionally, this adds a large test that tests for all raw identifiers in all kinds of positions, including `const`, to prevent issues like this one from occurring again.
fixes#137128
Overhaul `rustc_middle::limits`
In particular, to make `pattern_complexity` work more like other limits, which then enables some other simplifications.
r? ``@Nadrieril``
Start removing `rustc_middle::hir::map::Map`
`rustc_middle::hir::map::Map` is now just a low-value wrapper around `TyCtxt`. This PR starts removing it.
r? `@cjgillot`
The end goal is to eliminate `Map` altogether.
I added a `hir_` prefix to all of them, that seemed simplest. The
exceptions are `module_items` which became `hir_module_free_items` because
there was already a `hir_module_items`, and `items` which became
`hir_free_items` for consistency with `hir_module_free_items`.
Because of an ambiguity with const closures, the parser needs to ensure
that for a const item, the `const` keyword isn't followed by a `move` or
`static` keyword, as that would indicate a const closure:
```rust
fn main() {
const move // ...
}
```
This check did not take raw identifiers into account, therefore being
unable to distinguish between `const move` and `const r#move`. The
latter is obviously not a const closure, so it should be allowed as a
const item.
This fixes the check in the parser to only treat `const ...` as a const
closure if it's followed by the *proper keyword*, and not a raw
identifier.
Additionally, this adds a large test that tests for all raw identifiers in
all kinds of positions, including `const`, to prevent issues like this
one from occurring again.
Rework `name_regions` to not rely on reverse scc graph for non-member-constrain usages
Fixes https://github.com/rust-lang/rust/issues/137015
Splits the `name_regions` into two versions: One meant for member region constraint error reporting (which I've renamed to `name_regions_for_member_constraint`), and one meant *just* to replace region vids with an external region.
Use the latter in the usage sites I added in #136559, since the regions returned by `name_regions_for_member_constraint` are also not *totally* accurate (which is fine for how they're used for member region constraint error reporting -- they're intentionally returning overapproximated universal regions so that we have something to name in `+ use<'a>` suggestions, because opaques can only capture universal regions and since member region constraints don't insert any edges into the region graph, the error region is probably gonna be shorter than a universal region) and because that function requires the reverse scc graph to have been computed which isn't done for our usages in #136559.
rustdoc: improve refdef handling in the unresolved link lint
This commit takes advantage of a feature in pulldown-cmark that makes the list of link definitions available to the consuming application. It produces unresolved link warnings for refdefs that aren't used, and can now produce exact spans for the dest even when it has escapes.
Closes#133150 since this lint would have caught the mistake in that issue, and, along with https://github.com/rust-lang/rust-clippy/pull/13707, most mistakes in this class should produce a warning from one of them.
Export kernel descriptor for amdgpu kernels
The host runtime (HIP or HSA) expects a kernel descriptor object for each kernel in the ELF file. The amdgpu LLVM backend generates the object. It is created as a symbol with the name of the kernel plus a `.kd` suffix.
Add it to the exported symbols in the linker script, so that it can be found.
For reference, the symbol is created here in LLVM: d5457e4c16/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp (L966)
I wrote [a test](6a9115b121) for this as well, I’ll add that once the target is merged and working.
With this, all PRs to get working code for amdgpu are open (this + the target + the two patches adding addrspacecasts for alloca and global variables).
Tracking issue: #135024
r? `@workingjubilee`
This commit takes advantage of a feature in pulldown-cmark that
makes the list of link definitions available to the consuming
application. It produces unresolved link warnings for refdefs
that aren't used, and can now produce exact spans for the dest
even when it has escapes.
