Remove various double spaces in the libraries.
I was just pretty bothered by this when reading the source for a function, and was suggested to check if this happened elsewhere.
Stop probing for statx unless necessary
As is the current toy program:
fn main() -> std::io::Result<()> {
use std::fs;
let metadata = fs::metadata("foo.txt")?;
assert!(!metadata.is_dir());
Ok(())
}
... observed under strace will issue:
[snip]
statx(0, NULL, AT_STATX_SYNC_AS_STAT, STATX_ALL, NULL) = -1 EFAULT (Bad address) statx(AT_FDCWD, "foo.txt", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0644, stx_size=0, ...}) = 0
While statx is not necessarily always present, checking for it can be delayed to the first error condition. Said condition may very well never happen, in which case the check got avoided altogether.
Note this is still suboptimal as there still will be programs issuing it, but bulk of the problem is removed.
Tested by forbidding the syscall for the binary and observing it correctly falls back to newfstatat.
While here tidy up the commentary, in particular by denoting some problems with the current approach.
As is the current toy program:
fn main() -> std::io::Result<()> {
use std::fs;
let metadata = fs::metadata("foo.txt")?;
assert!(!metadata.is_dir());
Ok(())
}
... observed under strace will issue:
[snip]
statx(0, NULL, AT_STATX_SYNC_AS_STAT, STATX_ALL, NULL) = -1 EFAULT (Bad address)
statx(AT_FDCWD, "foo.txt", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0644, stx_size=0, ...}) = 0
While statx is not necessarily always present, checking for it can be
delayed to the first error condition. Said condition may very well never
happen, in which case the check got avoided altogether.
Note this is still suboptimal as there still will be programs issuing
it, but bulk of the problem is removed.
Tested by forbidding the syscall for the binary and observing it
correctly falls back to newfstatat.
While here tidy up the commentary, in particular by denoting some
problems with the current approach.
Unify id-based thread parking implementations
Multiple platforms currently use thread-id-based parking implementations (NetBSD and SGX[^1]). Even though the strategy does not differ, these are duplicated for each platform, as the id is encoded into an atomic thread variable in different ways for each platform.
Since `park` is only called by one thread, it is possible to move the thread id into a separate field. By ensuring that the field is only written to once, before any other threads access it, these accesses can be unsynchronized, removing any restrictions on the size and niches of the thread id.
This PR also renames the internal `thread_parker` modules to `thread_parking`, as that name now better reflects their contents. I hope this does not add too much reviewing noise.
r? `@m-ou-se`
`@rustbot` label +T-libs
[^1]: SOLID supports this as well, I will switch it over in a follow-up PR.
Bump master bootstrap compiler
This PR bumps the bootstrap compiler to the beta created earlier this week, cherry-picks the stabilization version number updates, and updates the `cfg(bootstrap)`s.
r? `@Mark-Simulacrum`
available_parallelism: Gracefully handle zero value cfs_period_us
There seem to be some scenarios where the cgroup cpu quota field `cpu.cfs_period_us` can contain `0`. This field is used to determine the "amount" of parallelism suggested by the function `std:🧵:available_parallelism`
A zero value of this field cause a panic when `available_parallelism()` is invoked. This issue was detected by the call from binaries built by `cargo test`. I really don't feel like `0` is a good value for `cpu.cfs_period_us`, but I also don't think applications should panic if this value is seen.
This panic started happening with rust 1.64.0.
This case is gracefully handled by other projects which read this information: [num_cpus](e437b9d908/src/linux.rs (L207-L210)), [ninja](https://github.com/ninja-build/ninja/pull/2174/files), [dotnet](c4341d45ac/src/coreclr/pal/src/misc/cgroup.cpp (L481-L483))
Before this change, running `cargo test` in environments configured as described above would trigger this panic:
```
$ RUST_BACKTRACE=1 cargo test
Finished test [unoptimized + debuginfo] target(s) in 3.55s
Running unittests src/main.rs (target/debug/deps/x-9a42e145aca2934d)
thread 'main' panicked at 'attempt to divide by zero', library/std/src/sys/unix/thread.rs:546:70
stack backtrace:
0: rust_begin_unwind
1: core::panicking::panic_fmt
2: core::panicking::panic
3: std::sys::unix:🧵:cgroups::quota
4: std::sys::unix:🧵:available_parallelism
5: std:🧵:available_parallelism
6: test::helpers::concurrency::get_concurrency
7: test::console::run_tests_console
8: test::test_main
9: test::test_main_static
10: x::main
at ./src/main.rs:1:1
11: core::ops::function::FnOnce::call_once
at /tmp/rust-1.64-1.64.0-1/library/core/src/ops/function.rs:248:5
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
error: test failed, to rerun pass '--bin x'
```
I've tested this change in an environment which has the bad (questionable?) setup and rebuilding the test executable against a fixed std library fixes the panic.
Use correct clock in `park_timeout` on Horizon
Horizon does not support using `CLOCK_MONOTONIC` with condition variables, so use the system time instead.
fs: Fix#50619 (again) and add a regression test
Bug #50619 was fixed by adding an end_of_stream flag in #50630.
Unfortunately, that fix only applied to the readdir_r() path. When I
switched Linux to use readdir() in #92778, I inadvertently reintroduced
the bug on that platform. Other platforms that had always used
readdir() were presumably never fixed.
This patch enables end_of_stream for all platforms, and adds a
Linux-specific regression test that should hopefully prevent the bug
from being reintroduced again.
Allow blocking `Command::output`
### Problem
Currently, `Command::output` is internally implemented using `Command::spawn`. This is problematic because some targets (like UEFI) do not actually support multitasking and thus block while the program is executing. This coupling does not make much sense as `Command::output` is supposed to block until the execution is complete anyway and thus does not need to rely on a non-blocking `Child` or any other intermediate.
### Solution
This PR moves the implementation of `Command::output` to `std::sys`. This means targets can choose to implement only `Command::output` without having to implement `Command::spawn`.
### Additional Information
This was originally conceived when working on https://github.com/rust-lang/rust/pull/100316. Currently, the only target I know about that will benefit from this change is UEFI.
This PR can also be used to implement more efficient `Command::output` since the intermediate `Process` is not actually needed anymore, but that is outside the scope of this PR.
Since this is not a public API change, I'm not sure if an RFC is needed or not.
Use more LFS functions.
On Linux, use mmap64, open64, openat64, and sendfile64 in place of their non-LFS counterparts.
This is relevant to #94173.
With these changes (together with rust-lang/backtrace-rs#501), the simple binaries I produce with rustc seem to have no non-LFS functions, so maybe #94173 is fixed. But I can't be sure if I've missed something and maybe some non-LFS functions could sneak in somehow.
Bug #50619 was fixed by adding an end_of_stream flag in #50630.
Unfortunately, that fix only applied to the readdir_r() path. When I
switched Linux to use readdir() in #92778, I inadvertently reintroduced
the bug on that platform. Other platforms that had always used
readdir() were presumably never fixed.
This patch enables end_of_stream for all platforms, and adds a
Linux-specific regression test that should hopefully prevent the bug
from being reintroduced again.
This allows decoupling `Command::spawn` and `Command::output`. This is
useful for targets which do support launching programs in blocking mode
but do not support multitasking (Eg: UEFI).
This was originally conceived when working on https://github.com/rust-lang/rust/pull/100316
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
Avoid heap allocation when truncating thread names
Ensure that heap allocation does not occur in a thread until `std::thread` is ready. This fixes issues with custom allocators that call `std:🧵:current()`, since doing so prematurely initializes `THREAD_INFO` and causes the following `thread_info::set()` to fail.
Add `read_to_end` method for `sys::{target}::pipe::AnonPipe`. This allows
having a more optimized version of `read_to_end` for ChildStdout.
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
Ensure that heap allocation does not occur in a thread until std::thread
is ready. This fixes issues with custom allocators that call
std:🧵:current(), since doing so prematurely initializes
THREAD_INFO and causes the following thread_info::set() to fail.
On Linux, use mmap64, open64, openat64, and sendfile64 in place of their
non-LFS counterparts.
This is relevant to #94173.
With these changes (together with rust-lang/backtrace-rs#501), the
simple binaries I produce with rustc seem to have no non-LFS functions,
so maybe #94173 is fixed. But I can't be sure if I've missed something
and maybe some non-LFS functions could sneak in somehow.
Commit 77005950f0 implemented masking of
FileType to fix an issue[^1] in the semantic of FileType comparison.
This commit introduces masking to Hash to maintain the invariant that
x == y => hash(x) == hash(y).
[^1]: https://github.com/rust-lang/rust/issues/104900
There seem to be some scenarios where `cpu.cfs_period_us` can contain `0`
This causes a panic when calling `std:🧵:available_parallelism()` as is done so
from binaries built by `cargo test`, which was how the issue was
discovered. I don't feel like `0` is a good value for `cpu.cfs_period_us`, but I
also don't think applications should panic if this value is seen.
This case is handled by other projects which read this information:
- num_cpus: e437b9d908/src/linux.rs (L207-L210)
- ninja: https://github.com/ninja-build/ninja/pull/2174/files
- dotnet: c4341d45ac/src/coreclr/pal/src/misc/cgroup.cpp (L481-L483)
Before this change, this panic could be seen in environments setup as described
above:
```
$ RUST_BACKTRACE=1 cargo test
Finished test [unoptimized + debuginfo] target(s) in 3.55s
Running unittests src/main.rs (target/debug/deps/x-9a42e145aca2934d)
thread 'main' panicked at 'attempt to divide by zero', library/std/src/sys/unix/thread.rs:546:70
stack backtrace:
0: rust_begin_unwind
1: core::panicking::panic_fmt
2: core::panicking::panic
3: std::sys::unix:🧵:cgroups::quota
4: std::sys::unix:🧵:available_parallelism
5: std:🧵:available_parallelism
6: test::helpers::concurrency::get_concurrency
7: test::console::run_tests_console
8: test::test_main
9: test::test_main_static
10: x::main
at ./src/main.rs:1:1
11: core::ops::function::FnOnce::call_once
at /tmp/rust-1.64-1.64.0-1/library/core/src/ops/function.rs:248:5
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
error: test failed, to rerun pass '--bin local-rabmq-amqpprox'
```
I've tested this change in an environment which has the bad setup and
rebuilding the test executable against a fixed std library fixes the
panic.
Truncate thread names on Linux and Apple targets
These targets have system limits on the thread names, 16 and 64 bytes
respectively, and `pthread_setname_np` returns an error if the name is
longer. However, we're not in a context that can propagate errors when
we call this, and we used to implicitly truncate on Linux with `prctl`,
so now we manually truncate these names ahead of time.
r? ``````@thomcc``````
