Add aarch64-apple-visionos and aarch64-apple-visionos-sim tier 3 targets
Introduces `aarch64-apple-visionos` and `aarch64-apple-visionos-sim` as tier 3 targets. This allows native development for the Apple Vision Pro's visionOS platform.
This work has been tracked in https://github.com/rust-lang/compiler-team/issues/642. There is a corresponding `libc` change https://github.com/rust-lang/libc/pull/3568 that is not required for merge.
Ideally we would be able to incorporate [this change](https://github.com/gimli-rs/object/pull/626) to the `object` crate, but the author has stated that a release will not be cut for quite a while. Therefore, the two locations that would reference the xrOS constant from `object` are hardcoded to their MachO values of 11 and 12, accompanied by TODOs to mark the code as needing change. I am open to suggestions on what to do here to get this checked in.
# Tier 3 Target Policy
At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
See [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
This naming scheme matches `$ARCH-$VENDOR-$OS-$ABI` which is matches the iOS Apple Silicon simulator (`aarch64-apple-ios-sim`) and other Apple targets.
> Tier 3 targets may have unusual requirements to build or use, but must not
create legal issues or impose onerous legal terms for the Rust project or for
Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the `tidy` tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to besubject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, `rustc` built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are *not* limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
This contribution is fully available under the standard Rust license with no additional legal restrictions whatsoever. This PR does not introduce any new dependency less permissive than the Rust license policy.
The new targets do not depend on proprietary libraries.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This new target mirrors the standard library for watchOS and iOS, with minor divergences.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation is provided in [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I acknowledge these requirements and intend to ensure that they are met.
This target does not touch any existing tier 2 or tier 1 targets and should not break any other targets.
warning: casting raw pointers to the same type and constness is unnecessary (`*mut V` -> `*mut V`)
--> library\alloc\src\collections\btree\map\entry.rs:357:31
|
357 | let val_ptr = root.borrow_mut().push(self.key, value) as *mut V;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `root.borrow_mut().push
(self.key, value)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> library\alloc\src\ffi\c_str.rs:411:56
|
411 | let slice = slice::from_raw_parts_mut(ptr, len as usize);
| ^^^^^^^^^^^^ help: try: `len`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
warning: casting raw pointers to the same type and constness is unnecessary (`*mut T` -> `*mut T`)
--> library\alloc\src\slice.rs:516:25
|
516 | (buf.as_mut_ptr() as *mut T).add(buf.len()),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `buf.as_mut_ptr()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
warning: casting raw pointers to the same type and constness is unnecessary (`*mut T` -> `*mut T`)
--> library\alloc\src\slice.rs:537:21
|
537 | (buf.as_mut_ptr() as *mut T).add(buf.len()),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `buf.as_mut_ptr()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
warning: casting raw pointers to the same type and constness is unnecessary (`*const ()` -> `*const ()`)
--> library\alloc\src\task.rs:151:13
|
151 | waker as *const (),
| ^^^^^^^^^^^^^^^^^^ help: try: `waker`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
warning: casting raw pointers to the same type and constness is unnecessary (`*const ()` -> `*const ()`)
--> library\alloc\src\task.rs:323:13
|
323 | waker as *const (),
| ^^^^^^^^^^^^^^^^^^ help: try: `waker`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> library\std\src\sys_common\net.rs:110:21
|
110 | assert!(len as usize >= mem::size_of::<c::sockaddr_in>());
| ^^^^^^^^^^^^ help: try: `len`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> library\std\src\sys_common\net.rs:116:21
|
116 | assert!(len as usize >= mem::size_of::<c::sockaddr_in6>());
| ^^^^^^^^^^^^ help: try: `len`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
According to the POSIX standard, if connect() is interrupted by a
signal that is caught while blocked waiting to establish a connection,
connect() shall fail and set errno to EINTR, but the connection
request shall not be aborted, and the connection shall be established
asynchronously.
If asynchronous connection was successfully established after EINTR
and before the next connection attempt, OS returns EISCONN that was
handled as an error before. This behavior is fixed now and we handle
it as success.
The problem affects MacOS users: Linux doesn't return EISCONN in this
case, Windows connect() can not be interrupted without an old-fashoin
WSACancelBlockingCall function that is not used in the library.
So current solution gives connect() as OS specific implementation.
Implement read_buf for TcpStream, Stdin, StdinLock, ChildStdout,
ChildStderr (and internally for AnonPipe, Handle, Socket), so
that it skips buffer initialization.
The other provided methods like read_to_string and read_to_end are
implemented in terms of read_buf and so benefit from the optimization
as well.
This commit also implements read_vectored and is_read_vectored where
applicable.
Implement network primitives with ideal Rust layout, not C system layout
This PR is the result of this internals forum thread: https://internals.rust-lang.org/t/why-are-socketaddrv4-socketaddrv6-based-on-low-level-sockaddr-in-6/13321.
Instead of basing `std:::net::{Ipv4Addr, Ipv6Addr, SocketAddrV4, SocketAddrV6}` on system (C) structs, they are encoded in a more optimal and idiomatic Rust way.
This changes the public API of std by introducing structural equality impls for all four types here, which means that `match ipv4addr { SOME_CONSTANT => ... }` will now compile, whereas previously this was an error. No other intentional changes are introduced to public API.
It's possible to observe the current layout of these types (e.g., by pointer casting); most but not all libraries which were found by Crater to do this have had updates issued and affected versions yanked. See report below.
### Benefits of this change
- It will become possible to move these fundamental network types from `std` into `core` ([RFC](https://github.com/rust-lang/rfcs/pull/2832)).
- Some methods that can't be made `const fn`s today can be made `const fn`s with this change.
- `SocketAddrV4` only occupies 6 bytes instead of 16 bytes.
- These simple primitives become easier to read and uses less `unsafe`.
- Makes these types support structural equality, which means you can now (for instance) match an `Ipv4Addr` against a constant
### ~Remaining~ Previous problems
This change obviously changes the memory layout of the types. And it turns out some libraries invalidly assumes the memory layout and does very dangerous pointer casts to convert them. These libraries will have undefined behaviour and perform invalid memory access until patched.
- [x] - `mio` - Issue: https://github.com/tokio-rs/mio/issues/1386.
- [x] `0.7` branch https://github.com/tokio-rs/mio/pull/1388
- [x] `0.7.6` published https://github.com/tokio-rs/mio/pull/1398
- [x] Yank all `0.7` versions older than `0.7.6`
- [x] Report `<0.7.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0081.html
- [x] - `socket2` - Issue: https://github.com/rust-lang/socket2-rs/issues/119.
- [x] `0.3.x` branch https://github.com/rust-lang/socket2-rs/pull/120
- [x] `0.3.16` published
- [x] `master` branch https://github.com/rust-lang/socket2-rs/pull/122
- [x] Yank all `0.3` versions older than `0.3.16`
- [x] Report `<0.3.16` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0079.html
- [x] - `net2` - Issue: https://github.com/deprecrated/net2-rs/issues/105
- [x] https://github.com/deprecrated/net2-rs/pull/106
- [x] `0.2.36` published
- [x] Yank all `0.2` versions older than `0.2.36`
- [x] Report `<0.2.36` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0078.html
- [x] - `miow` - Issue: https://github.com/yoshuawuyts/miow/issues/38
- [x] `0.3.x` - https://github.com/yoshuawuyts/miow/pull/39
- [x] `0.3.6` published
- [x] `0.2.x` - https://github.com/yoshuawuyts/miow/pull/40
- [x] `0.2.2` published
- [x] Yanked all `0.2` versions older than `0.2.2`
- [x] Yanked all `0.3` versions older than `0.3.6`
- [x] Report `<0.2.2` and `<0.3.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0080.html
- [x] - `quinn master` (aka what became 0.7) - https://github.com/quinn-rs/quinn/issues/968https://github.com/quinn-rs/quinn/pull/987
- [x] - `quinn 0.6` - https://github.com/quinn-rs/quinn/pull/1045
- [x] - `quinn 0.5` - https://github.com/quinn-rs/quinn/pull/1046
- [x] - Release `0.7.0`, `0.6.2` and `0.5.4`
- [x] - `nb-connect` - https://github.com/smol-rs/nb-connect/issues/1
- [x] - Release `1.0.3`
- [x] - Yank all versions older than `1.0.3`
- [x] - `shadowsocks-rust` - https://github.com/shadowsocks/shadowsocks-rust/issues/462
- [ ] - `rio` - https://github.com/spacejam/rio/issues/44
- [ ] - `seaslug` - https://github.com/spacejam/seaslug/issues/1
#### Fixed crate versions
All crates I have found that assumed the memory layout have been fixed and published. The crates and versions that will continue working even as/if this PR is merged is (please upgrade these to help unblock this PR):
* `net2 0.2.36`
* `socket2 0.3.16`
* `miow 0.2.2`
* `miow 0.3.6`
* `mio 0.7.6`
* `mio 0.6.23` - Never had the invalid assumption itself, but has now been bumped to only allow fixed dependencies (`net2` + `miow`)
* `nb-connect 1.0.3`
* `quinn 0.5.4`
* `quinn 0.6.2`
### Release notes draft
This release changes the memory layout of `Ipv4Addr`, `Ipv6Addr`, `SocketAddrV4` and `SocketAddrV6`. The standard library no longer implements these as the corresponding `libc` structs (`sockaddr_in`, `sockaddr_in6` etc.). This internal representation was never exposed, but some crates relied on it anyway by unsafely transmuting. This change will cause those crates to make invalid memory accesses. Notably `net2 <0.2.36`, `socket2 <0.3.16`, `mio <0.7.6`, `miow <0.3.6` and a few other crates are affected. All known affected crates have been patched and have had fixed versions published over a year ago. If any affected crate is still in your dependency tree, you need to upgrade them before using this version of Rust.
POSIX allows `getsockopt` to set `*option_len` to a smaller value if
necessary. Windows will set `*option_len` to 1 for boolean options even
when the caller passes a `BOOL` (`int`) with `*option_len` as 4.
Previously `level` was named `opt` and `option_name` was named `val`,
then extra names of `payload` or `slot` were used for the option value.
This change aligns the wrapper parameters with their names in POSIX.
Winsock uses similar but more abbreviated names: `level`, `optname`,
`optval`, `optlen`.
