Implement `needs-subprocess` directive, and cleanup a bunch of tests to use `needs-{subprocess,threads}`
### Summary
Closes#128295.
- Implements `//@ needs-subprocess` directive in compiletest as requested in #128295. However, compiletest is a host tool, so we can't just try to spawn process because that spawns the process on *host*, not the *target*, under cross-compilation scenarios.
- The short-term solution is to add *Yet Another* list of allow-list targets.
- The long-term solution is to first check if a `$target` supports std, then try to run a binary to do run-time capability detection *on the target*. But that is tricky because you have to build-and-run a binary *for the target*.
- This PR picks the short-term solution, because the long-term solution is highly non-trivial, and it's already an improvement over individual `ignore-*`s all over the place.
- Opened an issue about the long-term solution in #135928.
- Documents `//@ needs-subprocess` in rustc-dev-guide.
- Replace `ignore-{wasm,wasm32,emscripten,sgx}` with `needs-{subprocess,threads}` where suitable in tests.
- Some drive-by test changes as I was trying to figure out if I could use `needs-{subprocess,threads}` and found some bits needlessly distracting.
Count of tests that use `ignore-{wasm,wasm32,emscripten,sgx}` before and after this PR:
| State | `ignore-sgx` | `ignore-wasm` | `ignore-emscripten` |
| - | - | - | - |
| Before this PR | 96 | 88 | 207 |
| After this PR | 36 | 38 | 61 |
<details>
<summary>Commands used to find out locally</summary>
```
--- before
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-sgx" tests | wc -l
96
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-wasm" tests | wc -l
88
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-emscripten" tests | wc -l
207
--- after
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-sgx" tests | wc -l
36
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-wasm" tests | wc -l
38
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-emscripten" tests | wc -l
61
```
</details>
### Review advice
- Best reviewed commit-by-commit.
- Non-trivial test changes (not mechanically simple replacements) are split into individual commits to help with review. Their individual commit messages give some basic description of the changes.
- I *could* split some test changes out into another PR, but I found that I needed to change some tests to `needs-threads`, some to `needs-subprocess`, and some needed to use *both*, so they might conflict and become very annoying.
---
r? ``@ghost`` (need to run try jobs)
try-job: x86_64-msvc-1
try-job: i686-msvc-1
try-job: i686-mingw
try-job: x86_64-mingw-1
try-job: x86_64-apple-1
try-job: aarch64-apple
try-job: aarch64-gnu
try-job: test-various
try-job: armhf-gnu
Implement `ByteStr` and `ByteString` types
Approved ACP: https://github.com/rust-lang/libs-team/issues/502
Tracking issue: https://github.com/rust-lang/rust/issues/134915
These types represent human-readable strings that are conventionally,
but not always, UTF-8. The `Debug` impl prints non-UTF-8 bytes using
escape sequences, and the `Display` impl uses the Unicode replacement
character.
This is a minimal implementation of these types and associated trait
impls. It does not add any helper methods to other types such as `[u8]`
or `Vec<u8>`.
I've omitted a few implementations of `AsRef`, `AsMut`, and `Borrow`,
when those would be the second implementation for a type (counting the
`T` impl), to avoid potential inference failures. We can attempt to add
more impls later in standalone commits, and run them through crater.
In addition to the `bstr` feature, I've added a `bstr_internals` feature
for APIs provided by `core` for use by `alloc` but not currently
intended for stabilization.
This API and its implementation are based *heavily* on the `bstr` crate
by Andrew Gallant (`@BurntSushi).`
r? `@BurntSushi`
```
error: `size_of_val` is not yet stable as a const intrinsic
--> $DIR/const-unstable-intrinsic.rs:17:9
|
LL | unstable_intrinsic::size_of_val(&x);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: add `#![feature(unstable)]` to the crate attributes to enable
help: add `#![feature(unstable)]` to the crate attributes to enable
|
LL + #![feature("unstable")]
|
```
const traits: remove some known-bug that do not seem to make sense
These tests were made to point to #103507 in https://github.com/rust-lang/rust/pull/114134; I think that was a mistake: that issue is about a rather specific problem, and most tests marked as known-bug in that PR are pointing at https://github.com/rust-lang/rust/issues/110395 which makes more sense.
Of the 4 tests that still point to #103507:
- One is [the original test](2088260852/tests/ui/impl-trait/normalize-tait-in-const.rs). It still fails to compile, though currently for unrelated reasons (`~const Fn` is not valid as that is not a const trait). I made it point at #110395 like all the other tests that were disabled when the previous const trait impl was removed.
- One is being fixed in https://github.com/rust-lang/rust/pull/135423
- The other two are fixed in this PR
The errors we are getting here are not great but they do look correct?
FWIW there are still a whole lot of tests mentioning #110395 despite that issue being closed... I hope someone is tracking that.^^
r? `@compiler-errors`
Rollup of 7 pull requests
Successful merges:
- #132397 (Make missing_abi lint warn-by-default.)
- #133807 (ci: Enable opt-dist for dist-aarch64-linux builds)
- #134143 (Convert `struct FromBytesWithNulError` into enum)
- #134338 (Use a C-safe return type for `__rust_[ui]128_*` overflowing intrinsics)
- #134678 (Update `ReadDir::next` in `std::sys::pal::unix::fs` to use `&raw const (*p).field` instead of `p.byte_offset().cast()`)
- #135424 (Detect unstable lint docs that dont enable their feature)
- #135520 (Make sure we actually use the right trivial lifetime substs when eagerly monomorphizing drop for ADTs)
r? `@ghost`
`@rustbot` modify labels: rollup
Depth limit const eval query
Currently the const-eval query doesn't have a recursion limit or timeout, causing the complier to freeze in an infinite loop, see #125718. This PR depth limits the `eval_to_const_value_raw` query (with the [`recursion_limit`](https://doc.rust-lang.org/reference/attributes/limits.html) attribute) and improves the diagnostics for query overflow errors, so spans are reported for other dep kinds than `layout_of` (e.g. `eval_to_const_value_raw`).
fixes#125718fixes#114192
When we encounter a constant in a pattern, we check if it is non-structural. If so, we check if the type implements `PartialEq`, but for types with escaping bound vars the check would be incorrect as is, so we break early. This is ok because these types would be filtered anyways.
Fix#134764.
rustc_intrinsic: support functions without body
We synthesize a HIR body `loop {}` but such bodyless intrinsics.
Most of the diff is due to turning `ItemKind::Fn` into a brace (named-field) enum variant, because it carries a `bool`-typed field now. This is to remember whether the function has a body. MIR building panics to avoid ever translating the fake `loop {}` body, and the intrinsic logic uses the lack of a body to implicitly mark that intrinsic as must-be-overridden.
I first tried actually having no body rather than generating the fake body, but there's a *lot* of code that assumes that all function items have HIR and MIR, so this didn't work very well. Then I noticed that even `rustc_intrinsic_must_be_overridden` intrinsics have MIR generated (they are filled with an `Unreachable` terminator) so I guess I am not the first to discover this. ;)
r? `@oli-obk`
Improve infer (`_`) suggestions in `const`s and `static`s
Fixes https://github.com/rust-lang/rust/issues/135010.
This PR does a few things to (imo) greatly improve the error message when users write something like `static FOO: [i32; _] = [1, 2, 3]`.
Firstly, it adapts the recovery code for when we encounter `_` in a const/static to work a bit more like `fn foo() -> _`, and removes the somewhat redundant query `diagnostic_only_typeck`.
Secondly, it changes the lowering for `[T; _]` to always lower under the `feature(generic_arg_infer)` logic to `ConstArgKind::Infer`. We still issue the feature error, so it's not doing anything *observable* on the good path, but it does mean that we no longer erroneously interpret `[T; _]`'s array length as a `_` **wildcard expression** (à la destructuring assignment, like `(_, y) = expr`).
Lastly it makes the suggestions verbose and fixes (well, suppresses) a bug with stashing and suggestions.
r? oli-obk
stabilize const_swap
libs-api FCP passed in https://github.com/rust-lang/rust/issues/83163.
However, I only just realized that this actually involves an intrinsic. The intrinsic could be implemented entirely with existing stable const functionality, but we choose to make it a primitive to be able to detect more UB. So nominating for `@rust-lang/lang` to make sure they are aware; I leave it up to them whether they want to FCP this.
While at it I also renamed the intrinsic to make the "nonoverlapping" constraint more clear.
Fixes#83163
Provides unstable `T::from_ascii()` and `T::from_ascii_radix()` for integer
types `T`, as drafted in tracking issue #134821.
To deduplicate documentation without additional macros, implementations of
`isize` and `usize` no longer delegate to equivalent integer types.
After #132870 they are inlined anyway.
Make `ty::Error` implement all auto traits
I have no idea what's up with the crashes test I fixed--I really don't want to look into it since it has to do something with borrowck and multiple layers of opaques. I think the underlying idea of allowing error types to implement all auto traits is justified though.
Fixes#134796Fixes#131050
r? lcnr
Correctly note item kind in `NonConstFunctionCall` error message
Don't just call everything a "`fn`". This is more consistent with the error message we give for conditionally-const items, which do note the item's def kind.
r? fmease, this is a prerequisite for making those `~const PartialEq` error messages better. Re-roll if you're busy or don't want to review this.
Bounds-check with PtrMetadata instead of Len in MIR
Rather than emitting `Len(*_n)` in array index bounds checks, emit `PtrMetadata(copy _n)` instead -- with some asterisks for arrays and `&mut` that need it to be done slightly differently.
We're getting pretty close to removing `Len` entirely, actually. I think just one more PR after this (for slice drop shims).
r? mir
Consider comments and bare delimiters the same as an "empty line" for purposes of hiding rendered code output of long multispans. This results in more aggressive shortening of rendered output without losing too much context, specially in `*.stderr` tests that have "hidden" comments.
fix ICE on type error in promoted
Fixes https://github.com/rust-lang/rust/issues/133968
Ensure that when we turn a type error into a "this promoted failed to evaluate" error, we do record this as something that may happen even in "infallible" promoteds.
