This change implements the #[sanitize(..)] attribute, which opts to
replace the currently unstable #[no_sanitize]. Essentially the new
attribute works similar as #[no_sanitize], just with more flexible
options regarding where it is applied. E.g. it is possible to turn
a certain sanitizer either on or off:
`#[sanitize(address = "on|off")]`
This attribute now also applies to more places, e.g. it is possible
to turn off a sanitizer for an entire module or impl block:
```rust
\#[sanitize(address = "off")]
mod foo {
fn unsanitized(..) {}
#[sanitize(address = "on")]
fn sanitized(..) {}
}
\#[sanitize(thread = "off")]
impl MyTrait for () {
...
}
```
This attribute is enabled behind the unstable `sanitize` feature.
Port `#[rustc_layout_scalar_valid_range_start/end]` to the new attrib…
Ports `rustc_layout_scalar_valid_range_start` and `rustc_layout_scalar_valid_range_end` to the new attribute parsing infrastructure for https://github.com/rust-lang/rust/issues/131229#issuecomment-2971353197
r? `@jdonszelmann`
Add runtime check to avoid overwrite arg in `Diag`
## Origin PR description
At first, I set up a `debug_assert` check for the arg method to make sure that `args` in `Diag` aren't easily overwritten, and I added the `remove_arg()` method, so that if you do need to overwrite an arg, then you can explicitly call `remove_arg()` to remove it first, then call `arg()` to overwrite it.
For the code before the rust-lang/rust#142015 change, it won't compile because it will report an error
```
arg `instance`already exists.
```
This PR also modifies all diagnostics that fail the check to pass the check. There are two cases of check failure:
1. ~~Between *the parent diagnostic and the subdiagnostic*, or *between the subdiagnostics* have the same field between them. In this case, I renamed the conflicting fields.~~
2. ~~For subdiagnostics stored in `Vec`, the rendering may iteratively write the same arg over and over again. In this case, I changed the auto-generation with `derive(SubDiagnostic)` to manually implementing `SubDiagnostic` and manually rendered it with `eagerly_translate()`, similar to https://github.com/rust-lang/rust/issues/142031#issuecomment-2984812090, and after rendering it I manually deleted useless arg with the newly added `remove_arg` method.~~
## Final Decision
After trying and discussing, we made a final decision.
For `#[derive(Subdiagnostic)]`, This PR made two changes:
1. After the subdiagnostic is rendered, remove all args of this subdiagnostic, which allows for usage like `Vec<Subdiag>`.
2. Store `diag.args` before setting arguments, so that you can restore the contents of the main diagnostic after deleting the arguments after subdiagnostic is rendered, to avoid deleting the main diagnostic's arg when they have the same name args.
Tracking the old name of renamed unstable library features
This PR resolves the first problem of rust-lang/rust#141617 : tracking renamed unstable features. The first commit is to add a ui test, and the second one tracks the changes. I will comment on the code for clarification.
r? `@jdonszelmann`
There have been a lot of PR's reviewed by you lately, thanks for your time!
cc `@jyn514`
This will allow us to eagerly translate messages on a top-level
diagnostic, such as a `LintDiagnostic`. As a bonus, we can remove the
awkward closure passed into Subdiagnostic and make better use of
`Into`.
I'm removing empty identifiers everywhere, because in practice they
always mean "no identifier" rather than "empty identifier". (An empty
identifier is impossible.) It's better to use `Option` to mean "no
identifier" because you then can't forget about the "no identifier"
possibility.
Some specifics:
- When testing an attribute for a single name, the commit uses the
`has_name` method.
- When testing an attribute for multiple names, the commit uses the new
`has_any_name` method.
- When using `match` on an attribute, the match arms now have `Some` on
them.
In the tests, we now avoid printing empty identifiers by not printing
the identifier in the `error:` line at all, instead letting the carets
point out the problem.
add `naked_functions_rustic_abi` feature gate
tracking issue: https://github.com/rust-lang/rust/issues/138997
Because the details of the rust abi are unstable, and a naked function must match its stated ABI, this feature gate keeps naked functions with a rustic abi ("Rust", "rust-cold", "rust-call" and "rust-intrinsic") unstable.
r? ````@traviscross````
Emit `unused_attributes` for `#[inline]` on exported functions
I saw someone post a code sample that contained these two attributes, which immediately made me suspicious.
My suspicions were confirmed when I did a small test and checked the compiler source code to confirm that in these cases, `#[inline]` is indeed ignored (because you can't exactly `LocalCopy`an unmangled symbol since that would lead to duplicate symbols, and doing a mix of an unmangled `GloballyShared` and mangled `LocalCopy` instantiation is too complicated for our current instatiation mode logic, which I don't want to change right now).
So instead, emit the usual unused attribute lint with a message saying that the attribute is ignored in this position.
I think this is not 100% true, since I expect LLVM `inlinehint` to still be applied to such a function, but that's not why people use this attribute, they use it for the `LocalCopy` instantiation mode, where it doesn't work.
r? saethlin as the instantiation guy
Procedurally, I think this should be fine to merge without any lang involvement, as this only does a very minor extension to an existing lint.
I saw someone post a code sample that contained these two attributes,
which immediately made me suspicious.
My suspicions were confirmed when I did a small test and checked the
compiler source code to confirm that in these cases, `#[inline]` is
indeed ignored (because you can't exactly `LocalCopy`an unmangled symbol
since that would lead to duplicate symbols, and doing a mix of an
unmangled `GloballyShared` and mangled `LocalCopy` instantiation is too
complicated for our current instatiation mode logic, which I don't want
to change right now).
So instead, emit the usual unused attribute lint with a message saying
that the attribute is ignored in this position.
I think this is not 100% true, since I expect LLVM `inlinehint` to still
be applied to such a function, but that's not why people use this
attribute, they use it for the `LocalCopy` instantiation mode, where it
doesn't work.
Make it so that every structured error annotated with `#[derive(Diagnostic)]` that has a field of type `Ty<'_>`, the printing of that value into a `String` will look at the thread-local storage `TyCtxt` in order to shorten to a length appropriate with the terminal width. When this happen, the resulting error will have a note with the file where the full type name was written to.
```
error[E0618]: expected function, found `((..., ..., ..., ...), ..., ..., ...)``
--> long.rs:7:5
|
6 | fn foo(x: D) { //~ `x` has type `(...
| - `x` has type `((..., ..., ..., ...), ..., ..., ...)`
7 | x(); //~ ERROR expected function, found `(...
| ^--
| |
| call expression requires function
|
= note: the full name for the type has been written to 'long.long-type-14182675702747116984.txt'
= note: consider using `--verbose` to print the full type name to the console
```
Account for mutable borrow in argument suggestion
```
error: value assigned to `object` is never read
--> $DIR/mut-arg-of-borrowed-type-meant-to-be-arg-of-mut-borrow.rs:21:5
|
LL | object = &mut object2;
| ^^^^^^
|
help: you might have meant to mutate the pointed at value being passed in, instead of changing the reference in the local binding
|
LL ~ fn change_object3(object: &mut Object) {
LL |
LL | let object2 = Object;
LL ~ *object = object2;
|
```
instead of
```
error: value assigned to `object` is never read
--> $DIR/mut-arg-of-borrowed-type-meant-to-be-arg-of-mut-borrow.rs:21:5
|
LL | object = &mut object2;
| ^^^^^^
|
help: you might have meant to mutate the pointed at value being passed in, instead of changing the reference in the local binding
|
LL ~ fn change_object3(object: &mut mut Object) {
LL |
LL | let object2 = Object;
LL ~ *object = object2;
|
```
Fix#136028.
```
error: value assigned to `object` is never read
--> $DIR/mut-arg-of-borrowed-type-meant-to-be-arg-of-mut-borrow.rs:21:5
|
LL | object = &mut object2;
| ^^^^^^
|
help: you might have meant to mutate the pointed at value being passed in, instead of changing the reference in the local binding
|
LL ~ fn change_object3(object: &mut Object) {
LL |
LL | let object2 = Object;
LL ~ *object = object2;
|
```
instead of
```
error: value assigned to `object` is never read
--> $DIR/mut-arg-of-borrowed-type-meant-to-be-arg-of-mut-borrow.rs:21:5
|
LL | object = &mut object2;
| ^^^^^^
|
help: you might have meant to mutate the pointed at value being passed in, instead of changing the reference in the local binding
|
LL ~ fn change_object3(object: &mut mut Object) {
LL |
LL | let object2 = Object;
LL ~ *object = object2;
|
```
Fix#136028.
