When looking for the field names and types of a given type, account for tuples. This allows suggestions for incorrectly nested field accesses and field name typos to trigger as intended. Previously these suggestions only worked on `ty::Adt`, including tuple structs which are no different to tuples, so they should behave the same in suggestions.
```
error[E0599]: no method named `get_ref` found for tuple `(BufReader<File>,)` in the current scope
--> $DIR/missing-field-access.rs:11:15
|
LL | let x = f.get_ref();
| ^^^^^^^ method not found in `(BufReader<File>,)`
|
help: one of the expressions' fields has a method of the same name
|
LL | let x = f.0.get_ref();
| ++
```
Change the way that underline positions are calculated by delaying using
the "visual" column position until the last possible moment, instead
using the "file"/byte position in the file, and then calculating visual
positioning as late as possible. This should make the underlines more
resilient to non-1-width unicode chars.
Unfortunately, as part of this change (which fixes some visual bugs)
comes with the loss of some eager tab codepoint handling, but the output
remains legible despite some minor regression on the "margin trimming"
logic.
When encountering a single line span that is wider than the terminal, we keep context at the start and end of the span but otherwise remove the code from the middle. This is somewhat independent from whether the left and right margins of the output have been trimmed as well.
```
error[E0308]: mismatched types
--> $DIR/long-span.rs:6:15
|
LL | ... = [0, 0, 0, 0, ..., 0, 0];
| ^^^^^^^^^^^^^...^^^^^^^ expected `u8`, found `[{integer}; 1681]`
```
Address part of #137680 (missing handling of the long suggestion). Fix#125581.
```
error[E0614]: type `(..., ..., ..., ...)` cannot be dereferenced
--> $DIR/long-E0614.rs:10:5
|
LL | *x;
| ^^ can't be dereferenced
|
= note: the full name for the type has been written to '$TEST_BUILD_DIR/$FILE.long-type-hash.txt'
= note: consider using `--verbose` to print the full type name to the console
```
Make it so that every structured error annotated with `#[derive(Diagnostic)]` that has a field of type `Ty<'_>`, the printing of that value into a `String` will look at the thread-local storage `TyCtxt` in order to shorten to a length appropriate with the terminal width. When this happen, the resulting error will have a note with the file where the full type name was written to.
```
error[E0618]: expected function, found `((..., ..., ..., ...), ..., ..., ...)``
--> long.rs:7:5
|
6 | fn foo(x: D) { //~ `x` has type `(...
| - `x` has type `((..., ..., ..., ...), ..., ..., ...)`
7 | x(); //~ ERROR expected function, found `(...
| ^--
| |
| call expression requires function
|
= note: the full name for the type has been written to 'long.long-type-14182675702747116984.txt'
= note: consider using `--verbose` to print the full type name to the console
```
Use short ty string for binop and unop errors
```
error[E0369]: cannot add `(..., ..., ..., ...)` to `(..., ..., ..., ...)`
--> $DIR/binop.rs:10:7
|
LL | x + x;
| - ^ - (..., ..., ..., ...)
| |
| (..., ..., ..., ...)
|
= note: the full name for the type has been written to '$TEST_BUILD_DIR/$FILE.long-type-hash.txt'
= note: consider using `--verbose` to print the full type name to the console
```
```
error[E0600]: cannot apply unary operator `!` to type `(..., ..., ..., ...)`
--> $DIR/binop.rs:14:5
|
LL | !x;
| ^^ cannot apply unary operator `!`
|
= note: the full name for the type has been written to '$TEST_BUILD_DIR/$FILE.long-type-hash.txt'
= note: consider using `--verbose` to print the full type name to the console
```
CC #135919.
```
error[E0369]: cannot add `((..., ..., ..., ...), ..., ..., ...)` to `((..., ..., ..., ...), ..., ..., ...)`
--> $DIR/binop.rs:9:7
|
LL | x + x;
| - ^ - ((..., ..., ..., ...), ..., ..., ...)
| |
| ((..., ..., ..., ...), ..., ..., ...)
|
= note: the full name for the type has been written to '$TEST_BUILD_DIR/$FILE.long-type-hash.txt'
= note: consider using `--verbose` to print the full type name to the console
```
```
error[E0600]: cannot apply unary operator `!` to type `(..., ..., ..., ...)`
--> $DIR/binop.rs:14:5
|
LL | !x;
| ^^ cannot apply unary operator `!`
|
= note: the full name for the type has been written to '$TEST_BUILD_DIR/$FILE.long-type-hash.txt'
= note: consider using `--verbose` to print the full type name to the console
```
CC #135919.
Make it so more type-system types can be printed in a shortened version (like `Predicate`s).
Centralize printing the information about the "full type name path".
Make the "long type path" for the file where long types are written part of `Diag`, so that it becomes easier to keep track of it, and ensure it will always will be printed out last in the diagnostic by making its addition to the output implicit.
Tweak the shortening of types in "expected/found" labels.
Remove dead file `note.rs`.
Use short ty string for move errors
```
error[E0382]: use of moved value: `x`
--> bay.rs:14:14
|
12 | fn foo(x: D) {
| - move occurs because `x` has type `(((..., ..., ..., ...), ..., ..., ...), ..., ..., ...)`, which does not implement the `Copy` trait
13 | let _a = x;
| - value moved here
14 | let _b = x; //~ ERROR use of moved value
| ^ value used here after move
|
= note: the full type name has been written to 'bay.long-type-14349227078439097973.txt'
= note: consider using `--verbose` to print the full type name to the console
help: consider cloning the value if the performance cost is acceptable
|
13 | let _a = x.clone();
| ++++++++
```
Address 4th case in #135919.
```
error[E0382]: use of moved value: `x`
--> bay.rs:14:14
|
12 | fn foo(x: D) {
| - move occurs because `x` has type `(((..., ..., ..., ...), ..., ..., ...), ..., ..., ...)`, which does not implement the `Copy` trait
13 | let _a = x;
| - value moved here
14 | let _b = x; //~ ERROR use of moved value
| ^ value used here after move
|
= note: the full type name has been written to 'bay.long-type-14349227078439097973.txt'
= note: consider using `--verbose` to print the full type name to the console
help: consider cloning the value if the performance cost is acceptable
|
13 | let _a = x.clone();
| ++++++++
```
We were previously printing the full type on the "this expression has type" label.
```
error[E0308]: mismatched types
--> $DIR/secondary-label-with-long-type.rs:8:9
|
LL | let () = x;
| ^^ - this expression has type `((..., ..., ..., ...), ..., ..., ...)`
| |
| expected `((..., ..., ..., ...), ..., ..., ...)`, found `()`
|
= note: expected tuple `((..., ..., ..., ...), ..., ..., ...)`
found unit type `()`
= note: the full type name has been written to '$TEST_BUILD_DIR/diagnostic-width/secondary-label-with-long-type/secondary-label-with-long-type.long-type-3987761834644699448.txt'
= note: consider using `--verbose` to print the full type name to the console
```
Reported in a comment of #135919.
Passing an explicit boolean value (`on`, `off` etc.) appears to work, but
actually puts the compiler into an unintended state where unstable _options_
are still forbidden, but unstable values of _some_ stable options are allowed.
Currently the json-formatted outputs have no way to unambiguously
determine which kind of message is being output. A consumer can look for
specific fields in the json object (eg "message"), but there's no
guarantee that in future some other kind of output will have a field of
the same name.
This PR adds a `"type"` field to add json outputs which can be used to
unambiguously determine which kind of output it is. The mapping is:
diagnostic: regular compiler diagnostics
artifact: artifact notifications
future_incompat: Report of future incompatibility
unused_extern: Unused crate warnings/errors
This matches the "internally tagged" representation for serde enums.
This option guards the logic of writing long type names in files and
instead using short forms in error messages in rustc_middle/ty/error
behind a flag. The main motivation for this change is to disable this
behaviour when running ui tests.
This logic can be triggered by running tests in a directory that has a
long enough path, e.g. /my/very-long-path/where/rust-codebase/exists/
This means ui tests can fail depending on how long the path to their
file is.
Some ui tests actually rely on this behaviour for their assertions,
so for those we enable the flag manually.
