The previous manual parsing of `serde_json::Value` was a lot of
complicated code and extremely error-prone. It was full of janky
behavior like sometimes ignoring type errors, sometimes erroring for
type errors, sometimes warning for type errors, and sometimes just
ICEing for type errors (the icing on the top).
Additionally, many of the error messages about allowed values were out
of date because they were in a completely different place than the
FromStr impls. Overall, the system caused confusion for users.
I also found the old deserialization code annoying to read. Whenever a
`key!` invocation was found, one had to first look for the right macro
arm, and no go to definition could help.
This PR replaces all this manual parsing with a 2-step process involving
serde.
First, the string is parsed into a `TargetSpecJson` struct. This struct
is a 1:1 representation of the spec JSON. It already parses all the
enums and is very simple to read and write.
Then, the fields from this struct are copied into the actual `Target`.
The reason for this two-step process instead of just serializing into a
`Target` is because of a few reasons
1. There are a few transformations performed between the two formats
2. The default logic is implemented this way. Otherwise all the default
field values would have to be spelled out again, which is
suboptimal. With this logic, they fall out naturally, because
everything in the json struct is an `Option`.
Overall, the mapping is pretty simple, with the vast majority of fields
just doing a 1:1 mapping that is captured by two macros. I have
deliberately avoided making the macros generic to keep them simple.
All the `FromStr` impls now have the error message right inside them,
which increases the chance of it being up to date. Some "`from_str`"
impls were turned into proper `FromStr` impls to support this.
The new code is much less involved, delegating all the JSON parsing
logic to serde, without any manual type matching.
This change introduces a few breaking changes for consumers. While it is
possible to use this format on stable, it is very much subject to
change, so breaking changes are expected. The hope is also that because
of the way stricter behavior, breaking changes are easier to deal with,
as they come with clearer error messages.
1. Invalid types now always error, everywhere. Previously, they would
sometimes error, and sometimes just be ignored (which meant the users
JSON was still broken, just silently!)
2. This now makes use of `deny_unknown_fields` instead of just warning
on unused fields, which was done previously. Serde doesn't make it
easy to get such warning behavior, which was the primary reason that
this now changed. But I think error behavior is very reasonable too.
If someone has random stale fields in their JSON, it is likely
because these fields did something at some point but no longer do,
and the user likely wants to be informed of this so they can figure
out what to do.
This is also relevant for the future. If we remove a field but
someone has it set, it probably makes sense for them to take a look
whether they need this and should look for alternatives, or whether
they can just delete it. Overall, the JSON is made more explicit.
This is the only expected breakage, but there could also be small
breakage from small mistakes. All targets roundtrip though, so it can't
be anything too major.
retpoline and retpoline-external-thunk flags (target modifiers) to enable retpoline-related target features
`-Zretpoline` and `-Zretpoline-external-thunk` flags are target modifiers (tracked to be equal in linked crates).
* Enables target features for `-Zretpoline-external-thunk`:
`+retpoline-external-thunk`, `+retpoline-indirect-branches`, `+retpoline-indirect-calls`.
* Enables target features for `-Zretpoline`:
`+retpoline-indirect-branches`, `+retpoline-indirect-calls`.
It corresponds to clang -mretpoline & -mretpoline-external-thunk flags.
Also this PR forbids to specify those target features manually (warning).
Issue: rust-lang/rust#116852
Add the AVX10 target features
Parent #138843
Adds the `avx10_target_feature` feature gate, and `avx10.1` and `avx10.2` target features.
It is confirmed that Intel is dropping AVX10/256 (see [this comment](https://github.com/rust-lang/rust/issues/111137#issuecomment-2795442288)), so this should be safe to implement now.
The LLVM fix for llvm/llvm-project#135394 was merged, and has been backported to LLVM20, and the patch has also been propagated to rustc in #140502
`@rustbot` label O-x86_64 O-x86_32 A-target-feature A-SIMD
This commit adds three ratified unprivileged RISC-V extensions related to
BFloat16 (BF16) handling.
Although that they are far from stabilization due to ABI issues, they are
optional extensions of the RVA23U64 profile (application-class processor
profile) and going to be discoverable from the Linux kernel
(as of version 6.15-rc4).
This commit mainly prepares runtime detection of those extensions.
This commit adds a part of RISC-V extensions that are mandatory part of
the RVA23U64 profile (application-class processor profile) and related to
memory/atomic constraints.
The Zic64b extension constrains the cache line to naturally-aligned 64 bytes
that would make certain memory operations (like zeroing the memory using
the Zicboz extension) easier.
The Zicbom and Zicbop extensions enable managing cache block-based
operations (the Zicbop contains hints that will work as a NOP when this
extension is absent and the Zicbom contains control instructions).
Of which, the Zicbom extension is going to be discoverable from the Linux
kernel (as of the version 6.15-rc4) and this commit prepares for
corresponding stdarch changes.
The Zicc* extensions add certain constraints to "the main memory" (usually
true on the user mode application on the application-class processor but
those extensions make sure such constraints exist).
Rollup of 9 pull requests
Successful merges:
- #135340 (Add `explicit_extern_abis` Feature and Enforce Explicit ABIs)
- #139440 (rustc_target: RISC-V: feature addition batch 2)
- #139667 (cfi: Remove #[no_sanitize(cfi)] for extern weak functions)
- #139828 (Don't require rigid alias's trait to hold)
- #139854 (Improve parse errors for stray lifetimes in type position)
- #139889 (Clean UI tests 3 of n)
- #139894 (Fix `opt-dist` CLI flag and make it work without LLD)
- #139900 (stepping into impls for normalization is unproductive)
- #139915 (replace some #[rustc_intrinsic] usage with use of the libcore declarations)
r? `@ghost`
`@rustbot` modify labels: rollup
Stabilize `cfg_boolean_literals`
Closes#131204
`@rustbot` labels +T-lang +I-lang-nominated
This will end up conflicting with the test in #138293 so whichever doesn't land first will need updating
--
# Stabilization Report
## General design
### What is the RFC for this feature and what changes have occurred to the user-facing design since the RFC was finalized?
[RFC 3695](https://github.com/rust-lang/rfcs/pull/3695), none.
### What behavior are we committing to that has been controversial? Summarize the major arguments pro/con.
None
### Are there extensions to this feature that remain unstable? How do we know that we are not accidentally committing to those?
None
## Has a call-for-testing period been conducted? If so, what feedback was received?
Yes; only positive feedback was received.
## Implementation quality
### Summarize the major parts of the implementation and provide links into the code (or to PRs)
Implemented in [#131034](https://github.com/rust-lang/rust/pull/131034).
### Summarize existing test coverage of this feature
- [Basic usage, including `#[cfg()]`, `cfg!()` and `#[cfg_attr()]`](6d71251cf9/tests/ui/cfg/true-false.rs)
- [`--cfg=true/false` on the command line being accessible via `r#true/r#false`](6d71251cf9/tests/ui/cfg/raw-true-false.rs)
- [Interaction with the unstable `#[doc(cfg(..))]` feature](https://github.com/rust-lang/rust/tree/6d71251/tests/rustdoc-ui/cfg-boolean-literal.rs)
- [Denying `--check-cfg=cfg(true/false)`](https://github.com/rust-lang/rust/tree/6d71251/tests/ui/check-cfg/invalid-arguments.rs)
- Ensuring `--cfg false` on the command line doesn't change the meaning of `cfg(false)`: `tests/ui/cfg/cmdline-false.rs`
- Ensuring both `cfg(true)` and `cfg(false)` on the same item result in it being disabled: `tests/ui/cfg/both-true-false.rs`
### What outstanding bugs in the issue tracker involve this feature? Are they stabilization-blocking?
The above mentioned issue; it should not block as it interacts with another unstable feature.
### What FIXMEs are still in the code for that feature and why is it ok to leave them there?
None
### Summarize contributors to the feature by name for recognition and assuredness that people involved in the feature agree with stabilization
- `@clubby789` (RFC)
- `@Urgau` (Implementation in rustc)
### Which tools need to be adjusted to support this feature. Has this work been done?
`rustdoc`'s unstable`#[doc(cfg(..)]` has been updated to respect it. `cargo` has been updated with a forward compatibility lint to enable supporting it in cargo once stabilized.
## Type system and execution rules
### What updates are needed to the reference/specification? (link to PRs when they exist)
A few lines to be added to the reference for configuration predicates, specified in the RFC.
Add minimal x86_64-lynx-lynxos178 support.
Add minimal x86_64-lynx-lynxos178 support. It's possible to build no_std
programs with this compiler.
## Tier 3 Target Policy
> A tier 3 target must have a designated developer or developers (the "target
maintainers") on record to be CCed when issues arise regarding the target. (The
mechanism to track and CC such developers may evolve over time.)
Tim Newsome (`@tnewsome-lynx)` will be the designated developer for
x86_64-lynx-lynxos178 support.
> Targets must use naming consistent with any existing targets; for instance, a
target for the same CPU or OS as an existing Rust target should use the same
name for that CPU or OS. Targets should normally use the same names and naming
conventions as used elsewhere in the broader ecosystem beyond Rust (such as in
other toolchains), unless they have a very good reason to diverge. Changing the
name of a target can be highly disruptive, especially once the target reaches a
higher tier, so getting the name right is important even for a tier 3 target.
I believe the target is named appropriately.
> Target names should not introduce undue confusion or ambiguity unless
absolutely necessary to maintain ecosystem compatibility. For example, if the
name of the target makes people extremely likely to form incorrect beliefs about
what it targets, the name should be changed or augmented to disambiguate it.
The target name is not confusing.
> If possible, use only letters, numbers, dashes and underscores for the name.
Periods (.) are known to cause issues in Cargo.
Done.
> Tier 3 targets may have unusual requirements to build or use, but must not
create legal issues or impose onerous legal terms for the Rust project or for
Rust developers or users.
> The target must not introduce license incompatibilities.
> Anything added to the Rust repository must be under the standard Rust license
(MIT OR Apache-2.0).
All this new code is licensed under the Apache-2.0 license.
> The target must not cause the Rust tools or libraries built for any other host
(even when supporting cross-compilation to the target) to depend on any new
dependency less permissive than the Rust licensing policy. This applies whether
the dependency is a Rust crate that would require adding new license exceptions
(as specified by the tidy tool in the rust-lang/rust repository), or whether the
dependency is a native library or binary. In other words, the introduction of
the target must not cause a user installing or running a version of Rust or the
Rust tools to be subject to any new license requirements.
Done.
> Compiling, linking, and emitting functional binaries, libraries, or other code
for the target (whether hosted on the target itself or cross-compiling from
another target) must not depend on proprietary (non-FOSS) libraries. Host tools
built for the target itself may depend on the ordinary runtime libraries
supplied by the platform and commonly used by other applications built for the
target, but those libraries must not be required for code generation for the
target; cross-compilation to the target must not require such libraries at all.
For instance, rustc built for the target may depend on a common proprietary C
runtime library or console output library, but must not depend on a proprietary
code generation library or code optimization library. Rust's license permits
such combinations, but the Rust project has no interest in maintaining such
combinations within the scope of Rust itself, even at tier 3.
I think we're in the clear here. We do link against some static libraries that
are proprietary (like libm and libc), but those are not used to generate code.
E.g. the VxWorks target requires `wr-c++` to be installed, which is not
publically available.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous"
legal/licensing terms include but are not limited to: non-disclosure
requirements, non-compete requirements, contributor license agreements (CLAs) or
equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional
on the employer or employment of any particular Rust developers, revocable
terms, any requirements that create liability for the Rust project or its
developers or users, or any requirements that adversely affect the livelihood or
prospects of the Rust project or its developers or users.
Our intention is to allow anyone with access to LynxOS CDK to use Rust for it.
> Neither this policy nor any decisions made regarding targets shall create any
binding agreement or estoppel by any party. If any member of an approving Rust
team serves as one of the maintainers of a target, or has any legal or
employment requirement (explicit or implicit) that might affect their decisions
regarding a target, they must recuse themselves from any approval decisions
regarding the target's tier status, though they may otherwise participate in
discussions.
> This requirement does not prevent part or all of this policy from being cited
in an explicit contract or work agreement (e.g. to implement or maintain support
for a target). This requirement exists to ensure that a developer or team
responsible for reviewing and approving a target does not face any legal threats
or obligations that would prevent them from freely exercising their judgment in
such approval, even if such judgment involves subjective matters or goes beyond
the letter of these requirements.
No problem.
> Tier 3 targets should attempt to implement as much of the standard libraries
as possible and appropriate (core for most targets, alloc for targets that can
support dynamic memory allocation, std for targets with an operating system or
equivalent layer of system-provided functionality), but may leave some code
unimplemented (either unavailable or stubbed out as appropriate), whether
because the target makes it impossible to implement or challenging to implement.
The authors of pull requests are not obligated to avoid calling any portions of
the standard library on the basis of a tier 3 target not implementing those
portions.
With this first PR, only core is supported. I am working on support for the std
library and intend to submit that once all the tests are passing.
> The target must provide documentation for the Rust community explaining how to
build for the target, using cross-compilation if possible. If the target
supports running binaries, or running tests (even if they do not pass), the
documentation must explain how to run such binaries or tests for the target,
using emulation if possible or dedicated hardware if necessary.
This is documented in `src/doc/rustc/src/platform-support/lynxos178.md`.
> Tier 3 targets must not impose burden on the authors of pull requests, or
other developers in the community, to maintain the target. In particular, do not
post comments (automated or manual) on a PR that derail or suggest a block on
the PR based on a tier 3 target. Do not send automated messages or notifications
(via any medium, including via `@)` to a PR author or others involved with a PR
regarding a tier 3 target, unless they have opted into such messages.
> Backlinks such as those generated by the issue/PR tracker when linking to an
issue or PR are not considered a violation of this policy, within reason.
However, such messages (even on a separate repository) must not generate
notifications to anyone involved with a PR who has not requested such
notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2
or tier 1 target, and must not knowingly break another tier 3 target without
approval of either the compiler team or the maintainers of the other tier 3
target.
> In particular, this may come up when working on closely related targets, such
as variations of the same architecture with different features. Avoid
introducing unconditional uses of features that another variation of the target
may not have; use conditional compilation or runtime detection, as appropriate,
to let each target run code supported by that target.
As far as I know this change does not affect any other targets.
> Tier 3 targets must be able to produce assembly using at least one of rustc's
supported backends from any host target. (Having support in a fork of the
backend is not sufficient, it must be upstream.)
Many targets produce assembly for x86_64 so that also works for LynxOS-178.
This commit adds unprivileged ratified extensions that are either
dicoverable from the `riscv_hwprobe` syscall of the Linux kernel (as of
version 6.14) plus 1 minus 3 extensions.
Plus 1:
* "B"
This is a combination of "Zba", "Zbb" and "Zbs".
Note:
Although not required by the RISC-V specification, it is convenient to
imply "B" from its three members (will be implemented in LLVM 21/22) but
this is not yet implemented in Rust due to current implication handling.
It still implies three members *from* "B".
Minus 2:
* "Zcf" (target_arch = "riscv32" only)
This is the compression instruction subset corresponding "F".
This is implied from RV32 + "C" + "F" but this complex handling is
not yet supported by Rust's feature handling.
* "Zcd"
This is the compression instruction subset corresponding "D".
This is implied from "C" + "D" but this complex handling is
not yet supported by Rust's feature handling.
* "Supm"
Unlike regular RISC-V extensions, "Supm" and "Sspm" extensions do not
provide any specific architectural features / constraints but requires
*some* mechanisms to control pointer masking for the current mode.
For instance, reported existence of the "Supm" extension in Linux means
that `prctl` system call to control pointer masking is available and
there are alternative ways to detect the existence.
Notes:
* Because this commit adds the "Zca" extension (an integer subset of the
"C" extension), the "C" extension is modified to imply "Zca".
It's possible to build no_std programs with this compiler.
> A tier 3 target must have a designated developer or developers (the "target
maintainers") on record to be CCed when issues arise regarding the target. (The
mechanism to track and CC such developers may evolve over time.)
Tim Newsome (@tnewsome-lynx) will be the designated developer for
x86_64-lynx-lynxos178 support.
> Targets must use naming consistent with any existing targets; for instance, a
target for the same CPU or OS as an existing Rust target should use the same
name for that CPU or OS. Targets should normally use the same names and naming
conventions as used elsewhere in the broader ecosystem beyond Rust (such as in
other toolchains), unless they have a very good reason to diverge. Changing the
name of a target can be highly disruptive, especially once the target reaches a
higher tier, so getting the name right is important even for a tier 3 target.
I believe the target is named appropriately.
> Target names should not introduce undue confusion or ambiguity unless
absolutely necessary to maintain ecosystem compatibility. For example, if the
name of the target makes people extremely likely to form incorrect beliefs about
what it targets, the name should be changed or augmented to disambiguate it.
The target name is not confusing.
> If possible, use only letters, numbers, dashes and underscores for the name.
Periods (.) are known to cause issues in Cargo.
Done.
> Tier 3 targets may have unusual requirements to build or use, but must not
create legal issues or impose onerous legal terms for the Rust project or for
Rust developers or users.
> The target must not introduce license incompatibilities.
> Anything added to the Rust repository must be under the standard Rust license
(MIT OR Apache-2.0).
All this new code is licensed under the Apache-2.0 license.
> The target must not cause the Rust tools or libraries built for any other host
(even when supporting cross-compilation to the target) to depend on any new
dependency less permissive than the Rust licensing policy. This applies whether
the dependency is a Rust crate that would require adding new license exceptions
(as specified by the tidy tool in the rust-lang/rust repository), or whether the
dependency is a native library or binary. In other words, the introduction of
the target must not cause a user installing or running a version of Rust or the
Rust tools to be subject to any new license requirements.
Done.
> Compiling, linking, and emitting functional binaries, libraries, or other code
for the target (whether hosted on the target itself or cross-compiling from
another target) must not depend on proprietary (non-FOSS) libraries. Host tools
built for the target itself may depend on the ordinary runtime libraries
supplied by the platform and commonly used by other applications built for the
target, but those libraries must not be required for code generation for the
target; cross-compilation to the target must not require such libraries at all.
For instance, rustc built for the target may depend on a common proprietary C
runtime library or console output library, but must not depend on a proprietary
code generation library or code optimization library. Rust's license permits
such combinations, but the Rust project has no interest in maintaining such
combinations within the scope of Rust itself, even at tier 3.
I think we're in the clear here. We do link against some static libraries that
are proprietary (like libm and libc), but those are not used to generate code.
E.g. the VxWorks target requires `wr-c++` to be installed, which is not
publically available.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous"
legal/licensing terms include but are not limited to: non-disclosure
requirements, non-compete requirements, contributor license agreements (CLAs) or
equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional
on the employer or employment of any particular Rust developers, revocable
terms, any requirements that create liability for the Rust project or its
developers or users, or any requirements that adversely affect the livelihood or
prospects of the Rust project or its developers or users.
Our intention is to allow anyone with access to LynxOS CDK to use Rust for it.
> Neither this policy nor any decisions made regarding targets shall create any
binding agreement or estoppel by any party. If any member of an approving Rust
team serves as one of the maintainers of a target, or has any legal or
employment requirement (explicit or implicit) that might affect their decisions
regarding a target, they must recuse themselves from any approval decisions
regarding the target's tier status, though they may otherwise participate in
discussions.
> This requirement does not prevent part or all of this policy from being cited
in an explicit contract or work agreement (e.g. to implement or maintain support
for a target). This requirement exists to ensure that a developer or team
responsible for reviewing and approving a target does not face any legal threats
or obligations that would prevent them from freely exercising their judgment in
such approval, even if such judgment involves subjective matters or goes beyond
the letter of these requirements.
No problem.
> Tier 3 targets should attempt to implement as much of the standard libraries
as possible and appropriate (core for most targets, alloc for targets that can
support dynamic memory allocation, std for targets with an operating system or
equivalent layer of system-provided functionality), but may leave some code
unimplemented (either unavailable or stubbed out as appropriate), whether
because the target makes it impossible to implement or challenging to implement.
The authors of pull requests are not obligated to avoid calling any portions of
the standard library on the basis of a tier 3 target not implementing those
portions.
With this first PR, only core is supported. I am working on support for the std
library and intend to submit that once all the tests are passing.
> The target must provide documentation for the Rust community explaining how to
build for the target, using cross-compilation if possible. If the target
supports running binaries, or running tests (even if they do not pass), the
documentation must explain how to run such binaries or tests for the target,
using emulation if possible or dedicated hardware if necessary.
This is documented in `src/doc/rustc/src/platform-support/lynxos_178.md`.
> Tier 3 targets must not impose burden on the authors of pull requests, or
other developers in the community, to maintain the target. In particular, do not
post comments (automated or manual) on a PR that derail or suggest a block on
the PR based on a tier 3 target. Do not send automated messages or notifications
(via any medium, including via @) to a PR author or others involved with a PR
regarding a tier 3 target, unless they have opted into such messages.
> Backlinks such as those generated by the issue/PR tracker when linking to an
issue or PR are not considered a violation of this policy, within reason.
However, such messages (even on a separate repository) must not generate
notifications to anyone involved with a PR who has not requested such
notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2
or tier 1 target, and must not knowingly break another tier 3 target without
approval of either the compiler team or the maintainers of the other tier 3
target.
> In particular, this may come up when working on closely related targets, such
as variations of the same architecture with different features. Avoid
introducing unconditional uses of features that another variation of the target
may not have; use conditional compilation or runtime detection, as appropriate,
to let each target run code supported by that target.
As far as I know this change does not affect any other targets.
> Tier 3 targets must be able to produce assembly using at least one of rustc's
supported backends from any host target. (Having support in a fork of the
backend is not sufficient, it must be upstream.)
Many targets produce assembly for x86_64 so that also works for LynxOS-178.
rustc_target: RISC-V: add base `I`-related important extensions
Of ratified RISC-V features defined, this commit adds extensions satisfying following criteria:
* Formerly a part of the `I` extension and splitted thereafter (now ratified as `I` + `Zifencei` + `Zicsr` + `Zicntr` + `Zihpm`) or
* Dicoverable from newer versions of the Linux kernel and implemented as a part of `std_detect`'s feature (`Zihintpause`) and
* Available on LLVM 18.
This is based on [the latest ratified ISA Manuals (version 20240411)](https://lf-riscv.atlassian.net/wiki/spaces/HOME/pages/16154769/RISC-V+Technical+Specifications).
LLVM Definitions:
* [`Zifencei`](https://github.com/llvm/llvm-project/blob/llvmorg-20.1.0/llvm/lib/Target/RISCV/RISCVFeatures.td#L133-L137)
* [`Zicsr`](https://github.com/llvm/llvm-project/blob/llvmorg-20.1.0/llvm/lib/Target/RISCV/RISCVFeatures.td#L116-L120)
* [`Zicntr`](https://github.com/llvm/llvm-project/blob/llvmorg-20.1.0/llvm/lib/Target/RISCV/RISCVFeatures.td#L122-L124)
* [`Zihpm`](https://github.com/llvm/llvm-project/blob/llvmorg-20.1.0/llvm/lib/Target/RISCV/RISCVFeatures.td#L153-L155)
* [`Zihintpause`](https://github.com/llvm/llvm-project/blob/llvmorg-20.1.0/llvm/lib/Target/RISCV/RISCVFeatures.td#L139-L144)
Additional (1):
One of those, `Zicsr`, is a dependency of many other ISA extensions and this commit adds correct dependencies to `Zicsr`.
Additional (2):
In RISC-V, `G` is an abbreviation of following extensions:
* `I`
* `M`
* `A`
* `F`
* `D`
* `Zicsr` (although implied by `F`)
* `Zifencei`
and all RISC-V targets with the `G` abbreviation and targets for Android / VxWorks are updated accordingly.
Note:
Android will require RVA22 (likely RVA22U64) and some more extensions, which is a superset of RV64GC. For VxWorks, all BSPs currently distributed by Wind River are for boards with RV64GC (this commit also updates `riscv32-wrs-vxworks` though).
--------
This is the version 4.
`Ztso` in the original proposal is removed on the PR version 2 due to the minimum LLVM version (non-experimental `Ztso` requires LLVM 19 while minimum LLVM version of Rust is 18). This is not back in PR version 3 and 4 after noticing adding `Ztso` is possible by checking host LLVM version because PR version 3 introduces compiler target changes (and adding more extensions would complicate the problems; sorry `Zihintpause`).
Version 4:
* Fixed some commit messages,
* Added Android / VxWorks targets to imply `G` and
* Added an implication from `Zve32x` to `Zicsr` (which makes all vector extension subsets to imply `Zicsr`)
since #138742 is now merged.
Related:
* #44839
(`riscv_target_feature`)
* #114544
(This PR can be a prerequisite of resolving a part of that tracking issue)
* #138742
(Touches the same place and vector extensions depend on `Zicsr`)
NOT Related but linked:
* #132618
(This PR won't be blocked by this issue since none of those extensions do not change the ABI)
`@rustbot` r? `@Amanieu`
`@rustbot` label +T-compiler +O-riscv +A-target-feature
Add the new `amx` target features and the `movrs` target feature
Adds 5 new `amx` target features included in LLVM20. These are guarded under `x86_amx_intrinsics` (#126622)
- `amx-avx512`
- `amx-fp8`
- `amx-movrs`
- `amx-tf32`
- `amx-transpose`
Adds the `movrs` target feature (from #137976).
`@rustbot` label O-x86_64 O-x86_32 T-compiler A-target-feature
r? `@Amanieu`
Of ratified RISC-V features defined, this commit adds extensions
satisfying following criteria:
* Formerly a part of the "I" extension and splitted thereafter
(now ratified as "I" + "Zifencei" + "Zicsr" + "Zicntr" + "Zihpm") or
* Dicoverable from newer versions of the Linux kernel and implemented
as a part of std_detect's feature ("Zihintpause").
This is based on the latest ratified ISA Manuals (version 20240411).
Additional (1):
One of those, "Zicsr", is a dependency of many other ISA extensions and
this commit adds correct dependencies to "Zicsr".
Additional (2):
In RISC-V, "G" is an abbreviation of following extensions:
* "I"
* "M"
* "A"
* "F"
* "D"
* "Zicsr" (although implied by "F")
* "Zifencei"
and all RISC-V targets with the "G" abbreviation and targets for Android /
VxWorks are updated accordingly.
Note:
Android will require RVA22 (likely RVA22U64) and some more extensions,
which is a superset of RV64GC. For VxWorks, all BSPs currently distributed
by Wind River are for boards with RV64GC (this commit also updates
riscv32-wrs-vxworks though).
Set `target_vendor = "openwrt"` on `mips64-openwrt-linux-musl`
OpenWRT is a Linux distribution for embedded network devices. The target name contains `openwrt`, so we should set `cfg(target_vendor = "openwrt")`.
This is similar to what other Linux distributions do (the only one in-tree is `x86_64-unikraft-linux-musl`, but that sets `target_vendor = "unikraft"`).
Motivation: To make correctly [parsing target names](https://github.com/rust-lang/cc-rs/pull/1413) simpler.
Fixes https://github.com/rust-lang/rust/issues/131165.
CC target maintainer `@Itus-Shield`
rustc_target: Add target features for LoongArch v1.1
This patch adds new target features for LoongArch v1.1:
* div32
* lam-bh
* lamcas
* ld-seq-sa
* scq
The target feature names are, right now, based on the llvm target feature names. These mostly line up well with the names of [Facility Inidications](https://publibfp.dhe.ibm.com/epubs/pdf/a227832d.pdf#page=301) names. The linux kernel uses shorter, more cryptic names. (e.g. "vector" is `vx`). We can deviate from the llvm names, but the CPU vendor (IBM) does not appear to use e.g. `vx` for what they call `vector`.
There are a number of implied target features between the vector facilities (based on the [Facility Inidications](https://publibfp.dhe.ibm.com/epubs/pdf/a227832d.pdf#page=301) table):
- 129 The vector facility for z/Architecture is installed in the z/Architecture architectural mode.
- 134 The vector packed decimal facility is installed in the z/Architecture architectural mode. When bit 134 is one, bit 129 is also one.
- 135 The vector enhancements facility 1 is installed in the z/Architecture architectural mode. When bit 135 is one, bit 129 is also one.
- 148 The vector-enhancements facility 2 is installed in the z/Architecture architectural mode. When bit 148 is one, bits 129 and 135 are also one.
- 152 The vector-packed-decimal-enhancement facility 1 is installed in the z/Architecture architectural mode. When bit 152 is one, bits 129 and 134 are also one.
- 165 The neural-network-processing-assist facility is installed in the z/Architecture architectural mode. When bit 165 is one, bit 129 is also one.
- 192 The vector-packed-decimal-enhancement facility 2 is installed in the z/Architecture architectural mode. When bit 192 is one, bits 129, 134, and 152 are also one.
And then there are a number of facilities without any implied target features
- 45 The distinct-operands, fast-BCR-serialization, high-word, and population-count facilities, the interlocked-access facility 1, and the load/store-oncondition facility 1 are installed in the z/Architecture architectural mode.
- 73 The transactional-execution facility is installed in the z/Architecture architectural mode. Bit 49 is one when bit 73 is one.
- 133 The guarded-storage facility is installed in the z/Architecture architectural mode.
- 150 The enhanced-sort facility is installed in the z/Architecture architectural mode.
- 151 The DEFLATE-conversion facility is installed in the z/Architecture architectural mode.
The added target features are those that have ISA implications, can be queried at runtime, and have LLVM support. LLVM [defines more target features](d49a2d2bc9/llvm/lib/Target/SystemZ/SystemZFeatures.td), but I'm not sure those are useful. They can always be added later, and can already be set globally using `-Ctarget-feature`.
