Visit `PatField` when collecting lint levels
Fixes#138428
Side-note, I vaguely skimmed over the other nodes we could be visiting here and it doesn't *seem* to me that we're missing anything, though I may be mistaken given recent(?) support for attrs in where clauses(??). Can be fixed in a follow-up PR.
To make room for the moving of `Map::attrs` to `TyCtxt::hir_attrs` in
the next commit. (It makes sense to rename the query, because it has
many fewer uses than the method.)
Continuing the work started in #136466.
Every method gains a `hir_` prefix, though for the ones that already
have a `par_` or `try_par_` prefix I added the `hir_` after that.
First of all, note that `Map` has three different relevant meanings.
- The `intravisit::Map` trait.
- The `map::Map` struct.
- The `NestedFilter::Map` associated type.
The `intravisit::Map` trait is impl'd twice.
- For `!`, where the methods are all unreachable.
- For `map::Map`, which gets HIR stuff from the `TyCtxt`.
As part of getting rid of `map::Map`, this commit changes `impl
intravisit::Map for map::Map` to `impl intravisit::Map for TyCtxt`. It's
fairly straightforward except various things are renamed, because the
existing names would no longer have made sense.
- `trait intravisit::Map` becomes `trait intravisit::HirTyCtxt`, so named
because it gets some HIR stuff from a `TyCtxt`.
- `NestedFilter::Map` assoc type becomes `NestedFilter::MaybeTyCtxt`,
because it's always `!` or `TyCtxt`.
- `Visitor::nested_visit_map` becomes `Visitor::maybe_tcx`.
I deliberately made the new trait and associated type names different to
avoid the old `type Map: Map` situation, which I found confusing. We now
have `type MaybeTyCtxt: HirTyCtxt`.
Point at lint name instead of whole attr for gated lints
```
warning: unknown lint: `test_unstable_lint`
--> $DIR/warn-unknown-unstable-lint-inline.rs:4:10
|
LL | #![allow(test_unstable_lint, another_unstable_lint)]
| ^^^^^^^^^^^^^^^^^^
|
= note: the `test_unstable_lint` lint is unstable
= help: add `#![feature(test_unstable_lint)]` to the crate attributes to enable
= note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
note: the lint level is defined here
--> $DIR/warn-unknown-unstable-lint-inline.rs:3:9
|
LL | #![warn(unknown_lints)]
| ^^^^^^^^^^^^^
warning: unknown lint: `test_unstable_lint`
--> $DIR/warn-unknown-unstable-lint-inline.rs:4:29
|
LL | #![allow(test_unstable_lint, another_unstable_lint)]
| ^^^^^^^^^^^^^^^^^^^^^
|
= note: the `another_unstable_lint` lint is unstable
= help: add `#![feature(another_unstable_lint)]` to the crate attributes to enable
= note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
```
This is particularly relevant when there are multiple lints in the same `warn` attribute. Pointing at the smaller span makes it clearer which one the warning is complaining about.
```
warning: unknown lint: `test_unstable_lint`
--> $DIR/warn-unknown-unstable-lint-inline.rs:4:10
|
LL | #![allow(test_unstable_lint, another_unstable_lint)]
| ^^^^^^^^^^^^^^^^^^
|
= note: the `test_unstable_lint` lint is unstable
= help: add `#![feature(test_unstable_lint)]` to the crate attributes to enable
= note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
note: the lint level is defined here
--> $DIR/warn-unknown-unstable-lint-inline.rs:3:9
|
LL | #![warn(unknown_lints)]
| ^^^^^^^^^^^^^
warning: unknown lint: `test_unstable_lint`
--> $DIR/warn-unknown-unstable-lint-inline.rs:4:29
|
LL | #![allow(test_unstable_lint, another_unstable_lint)]
| ^^^^^^^^^^^^^^^^^^^^^
|
= note: the `test_unstable_lint` lint is unstable
= help: add `#![feature(test_unstable_lint)]` to the crate attributes to enable
= note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
note: the lint level is defined here
--> $DIR/warn-unknown-unstable-lint-inline.rs:3:9
|
LL | #![warn(unknown_lints)]
| ^^^^^^^^^^^^^
```
This is particularly relevant when there are multiple lints in the same `warn` attribute. Pointing at the smaller span makes it clearer which one the warning is complaining about.
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
(Big performance change) Do not run lints that cannot emit
Before this change, adding a lint was a difficult matter because it always had some overhead involved. This was because all lints would run, no matter their default level, or if the user had `#![allow]`ed them. This PR changes that. This change would improve both the Rust lint infrastructure and Clippy, but Clippy will see the most benefit, as it has about 900 registered lints (and growing!)
So yeah, with this little patch we filter all lints pre-linting, and remove any lint that is either:
- Manually `#![allow]`ed in the whole crate,
- Allowed in the command line, or
- Not manually enabled with `#[warn]` or similar, and its default level is `Allow`
As some lints **need** to run, this PR also adds **loadbearing lints**. On a lint declaration, you can use the ``@eval_always` = true` marker to label it as loadbearing. A loadbearing lint will never be filtered (it will always run)
Fixes#106983
Before this change, adding a lint was a difficult matter
because it always had some overhead involved. This was
because all lints would run, no matter their default level,
or if the user had #![allow]ed them. This PR changes that
Forbid cannot be overriden. When someome tries to do this anyways,
it results in a hard error. That makes sense.
Except it doesn't, because macros. Macros may reasonably use `#[deny]`
in their expansion to assert
that their expanded code follows the lint. This is doesn't work when the
output gets expanded into a `forbid()` context. This is pretty silly,
since both the macros and the code agree on the lint!
Therefore, we allow `#[deny(..)]`ing a lint that's already forbidden,
keeping the level at forbid.
It has a clumsy type, with repeated `&'a [LintId]`, and sometimes
requires an empty string that isn't used in the `Err`+`None` case.
This commit splits it into two variants.
[perf] Delay the construction of early lint diag structs
Attacks some of the perf regressions from https://github.com/rust-lang/rust/pull/124417#issuecomment-2123700666.
See individual commits for details. The first three commits are not strictly necessary.
However, the 2nd one (06bc4fc671, *Remove `LintDiagnostic::msg`*) makes the main change way nicer to implement.
It's also pretty sweet on its own if I may say so myself.
* instead simply set the primary message inside the lint decorator functions
* it used to be this way before [#]101986 which introduced `msg` to prevent
good path delayed bugs (which no longer exist) from firing under certain
circumstances when lints were suppressed / silenced
* this is no longer necessary for various reasons I presume
* it shaves off complexity and makes further changes easier to implement
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
Create some minimal HIR for associated opaque types
`LocalDefId`s for opaque types in traits and impls are created after AST -> HIR lowering, so they don't have corresponding HIR and return their various properties through fed queries.
In this PR I also feed some core HIR-related queries for these `LocalDefId`s (which happen to be HIR owners).
As a result all `LocalDefId`s now have corresponding `HirId`s and HIR nodes, and "optional" methods like `opt_local_def_id_to_hir_id` and `opt_hir_node_by_def_id` can be removed.
Follow up to https://github.com/rust-lang/rust/pull/120206.
