This attempts to keep the logic as close to the original python as possible.
`probably_large` has been removed, since it was always `True`, and UTF-8 paths are no longer supported when patching files for NixOS.
I can readd UTF-8 support if desired.
Note that this required making `llvm_link_shared` computed on-demand,
since we don't know whether it will be static or dynamic until we download LLVM from CI.
Always use system `python3` on MacOS
This PR includes 2 changes:
1. Always use the system Python found at `/usr/bin/python3` on MacOS
2. Removes the hard requirement on having `python` in your system path if you didn't specify alternatives. The proposed change will instead attempt to find and use in order: `python` -> `python3` -> `python2`. This change isn't strictly necessary but without any change to this check, the original issue inspiring this change will still exist.
Fixes#95204
r? ```@jyn514```
Make it possible to run `cargo test` for bootstrap
Note that this only runs bootstrap's self-tests, not compiler or library tests.
Helps with https://github.com/rust-lang/rust/issues/94829.
Fix `cargo run tidy`
When I implemented rust-only bootstrapping in https://github.com/rust-lang/rust/pull/92260,
I neglected to test stage0 tools - it turns out they were broken because
they couldn't find the sysroot of the initial bootstrap compiler.
This fixes stage0 tools by using `rustc --print sysroot` instead of assuming rustc is already in a
sysroot and hard-coding the relative directory.
Fixes https://github.com/rust-lang/rust/issues/94797 (properly, without having to change rustup).
Enable conditional checking of values in the Rust codebase
This pull-request enable conditional checking of (well known) values in the Rust codebase.
Well known values were added in https://github.com/rust-lang/rust/pull/94362. All the `target_*` values are taken from all the built-in targets which is why some extra values were needed do be added as they are not (yet ?) defined in any built-in targets.
r? `@Mark-Simulacrum`
When I implemented rust-only bootstrapping in https://github.com/rust-lang/rust/pull/92260,
I neglected to test stage0 tools - it turns out they were broken because
they couldn't find the sysroot of the initial bootstrap compiler.
This fixes stage0 tools by using `rustc --print sysroot` instead of assuming rustc is already in a
sysroot and hard-coding the relative directory.
this also fixes a bug where bootstrap would try to use the fake `rustc` binary built by bootstrap -
cargo puts it in a different directory when using `cargo run` instead of x.py
The majority of the code is only used by either rustbuild or
rustc_llvm's build script. Rust_build is compiled once for rustbuild and
once for every stage. This means that the majority of the code in this
crate is needlessly compiled multiple times. By moving only the code
actually used by the respective crates to rustbuild and rustc_llvm's
build script, this needless duplicate compilation is avoided.
Enable conditional compilation checking on the Rust codebase
This pull-request enable conditional compilation checking on every rust project build by the `bootstrap` tool.
To be more specific, this PR only enable well known names checking + extra names (bootstrap, parallel_compiler, ...).
r? `@Mark-Simulacrum`
Remove num_cpus dependency from bootstrap, build-manifest and rustc_s…
…ession
`std::threads::available_parallelism` was stabilized in rust 1.59.
r? ```````````````````````````@Mark-Simulacrum```````````````````````````
First, this reverts the `CFLAGS`/`CXXFLAGS` of #93918. Those flags are
already read by `cc` and populated into `Build` earlier on in the
process. We shouldn't be overriding that based on `CFLAGS`, since `cc`
also respects overrides like `CFLAGS_{TARGET}` and `HOST_CFLAGS`, which
we want to take into account.
Second, this adds the same capability to specify target-specific
versions of `LDFLAGS` as we have through `cc` for the `C*` flags:
https://github.com/alexcrichton/cc-rs#external-configuration-via-environment-variables
Note that this also necessitated an update to compiletest to treat
CXXFLAGS separately from CFLAGS.
Drop time dependency from bootstrap
This was only used for the inclusion of 'current' dates into our manpages, but
it is not clear that this is practically necessary. The manpage is essentially
never updated, and so we can likely afford to keep a manual date in these files.
It also seems possible to just omit it, but that may cause other tools trouble,
so avoid doing that for now.
This is largely done to reduce bootstrap complexity; the time crate is not particularly
small and in #92480 would have started pulling in num-threads, which does runtime
thread count detection. I would prefer to avoid that, so filing this to just drop the nearly
unused dependency entirely.
r? `@pietroalbini`
This was only used for the inclusion of 'current' dates into our manpages, but
it is not clear that this is practically necessary. The manpage is essentially
never updated, and so we can likely afford to keep a manual date in these files.
It also seems possible to just omit it, but that may cause other tools trouble,
so avoid doing that for now.
This is particularly intended for invoking compiletest; the command line there
is long (3,350 characters on my system) and takes up a lot of screen real estate
for little benefit to the majority of those running bootstrap. This moves
printing it to verbose mode (-v must be passed) which means that it's still
possible to access when needed for debugging.
The main downside is that CI logs will by-default become less usable for
debugging (particularly) spurious failures, but it is pretty rare for us to
really need the information there -- it's usually fairly obvious what is being
run with a little investigation.
Previously, it would concatenate the relative path to the current
subdirectory, which looked at the wrong folder.
I tested this by checking out `1.56.1`, changing the current directory
to `src/`, and running `../x.py build`.
The new submodule handling depends on `is_git()` to be accurate to
decide whether it should handle submodules at all or not. Unfortunately,
`is_git()` treated "this directory does not have a git repository" and
"this repository should not be used for SHA/version/commit date info"
the same. This changes it to distinguish the two.
To clarify: ignore_get is set by default whenever channel == "dev", which it is by default whenever you're compiling locally. So basically everyone would hit this, not just people who had explicitly configured ignore_git.
Here's an example of an error this fixes:
```
$ x build
Updating only changed submodules
Submodules updated in 0.01 seconds
Finished dev [unoptimized + debuginfo] target(s) in 0.17s
warning: x.py has made several changes recently you may want to look at
help: consider looking at the changes in `src/bootstrap/CHANGELOG.md`
note: to silence this warning, add `changelog-seen = 2` at the top of `config.toml`
Building stage0 std artifacts (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu)
Finished release [optimized] target(s) in 0.16s
Copying stage0 std from stage0 (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu / x86_64-unknown-linux-gnu)
Building LLVM for x86_64-unknown-linux-gnu
detected home dir change, cleaning out entire build directory
running: "cmake" "/home/joshua/rustc3/src/llvm-project/llvm" "-G" "Ninja" "-DLLVM_ENABLE_ASSERTIONS=OFF" "-DLLVM_TARGETS_TO_BUILD=AArch64;ARM;BPF;Hexagon;MSP430;Mips;NVPTX;PowerPC;RISCV;Sparc;SystemZ;WebAssembly;X86" "-DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=AVR" "-DLLVM_INCLUDE_EXAMPLES=OFF" "-DLLVM_INCLUDE_DOCS=OFF" "-DLLVM_INCLUDE_BENCHMARKS=OFF" "-DLLVM_ENABLE_TERMINFO=OFF" "-DLLVM_ENABLE_LIBEDIT=OFF" "-DLLVM_ENABLE_BINDINGS=OFF" "-DLLVM_ENABLE_Z3_SOLVER=OFF" "-DLLVM_PARALLEL_COMPILE_JOBS=48" "-DLLVM_TARGET_ARCH=x86_64" "-DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-unknown-linux-gnu" "-DLLVM_ENABLE_ZLIB=ON" "-DLLVM_ENABLE_LIBXML2=OFF" "-DLLVM_VERSION_SUFFIX=-rust-dev" "-DCMAKE_INSTALL_MESSAGE=LAZY" "-DCMAKE_C_COMPILER=gcc" "-DCMAKE_CXX_COMPILER=g++" "-DCMAKE_ASM_COMPILER=gcc" "-DCMAKE_C_FLAGS=-ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_CXX_FLAGS=-ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_INSTALL_PREFIX=/home/joshua/rustc3/build/x86_64-unknown-linux-gnu/llvm" "-DCMAKE_ASM_FLAGS= -ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_BUILD_TYPE=Release"
CMake Error: The source directory "/home/joshua/rustc3/src/llvm-project/llvm" does not exist.
Specify --help for usage, or press the help button on the CMake GUI.
thread 'main' panicked at '
command did not execute successfully, got: exit status: 1
build script failed, must exit now', /home/joshua/.local/lib/cargo/registry/src/github.com-1ecc6299db9ec823/cmake-0.1.44/src/lib.rs:885:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
finished in 0.783 seconds
Build completed unsuccessfully in 0:00:01
```
This only updates the submodules the first time they're needed, instead
of unconditionally the first time you run x.py.
Ideally, this would move *all* submodules and not exclude some tools and
backtrace. Unfortunately, cargo requires all `Cargo.toml` files in the
whole workspace to be present to build any crate.
On my machine, this takes the time for an initial submodule clone (for
`x.py --help`) from 55.70 to 15.87 seconds.
This uses exactly the same logic as the LLVM update used, modulo some
minor cleanups:
- Use a local variable for `src.join(relative_path)`
- Remove unnecessary arrays for `book!` macro and make the macro simpler to use
- Add more comments
Use HTTPS links where possible
While looking at #86583, I wondered how many other (insecure) HTTP links were in `rustc`. This changes most other `http` links to `https`. While most of the links are in comments or documentation, there are a few other HTTP links that are used by CI that are changed to HTTPS.
Notes:
- I didn't change any to or in licences
- Some links don't support HTTPS :(
- Some `http` links were dead, in those cases I upgraded them to their new places (all of which used HTTPS)
Don't run sanity checks for `x.py setup`
These requirements change as soon as the command finishes running, and
`setup` doesn't build anything, so the check doesn't make sense.
Previously, `x.py setup` would give hard errors if `ninja` and `cmake`
were not installed, even if the new profile didn't require them.
Fixes https://github.com/rust-lang/rust/issues/84938.
These requirements change as soon as the command finishes running, and
`setup` doesn't build anything, so the check doesn't make sense.
Previously, `x.py setup` would give hard errors if `ninja` and `cmake`
were not installed, even if the new profile didn't require them.
