Add a travis builder for wasm32-unknown-emscripten
This commits add an entry to travis matrix that will execute wasm32-unknown-emscripten tests suites.
- Emscripten for asmjs was updated to sdk-1.37.13-64bit
- The tests are run with node 8.0.0 (it can execute wasm)
- A wrapper script is used to run each test from the directory where it is (workaround for https://github.com/kripken/emscripten/issues/4542)
- Some tests are ignore, see #42629 and #42630
Build instruction profiler runtime as part of compiler-rt
r? @alexcrichton
This is #38608 with some fixes.
Still missing:
- [x] testing with profiler enabled on some builders (on which ones? Should I add the option to some of the already existing configurations, or create a new configuration?);
- [x] enabling distribution (on which builders?);
- [x] documentation.
This option forwards to each `cargo test` invocation, and applies the
same logic across all test steps to keep going after failures. At the
end, a brief summary line reports how many commands failed, if any.
Note that if a test program fails to even start at all, or if an
auxiliary build command related to testing fails, these are still left
to stop everything right away.
Fixes#40219.
When `--quiet` is passed to rustbuild, suppress rustdoc test output unless
failure.
Added a `--quiet` flag to `tidy`, which suppresses the features table.
The actual `--quiet` flag is enabled in #42354.
Since details of failed tests will still be printed, and the name of slow
tests taking >60 to runtime will also be printed, the debugging difficulty
caused by information loss should be minimal; but it is very worthwhile to
keep the log under 10000 lines on Travis CI so that common errors can be
spotted without reading the raw log.
* Bring back colors on Travis, which was disabled since #39036.
Append --color=always to cargo when running in CI environment.
* Removed `set -x` in the shell scripts. The `retry` function already
prints which command it is running, add `-x` just add noise to the
output.
* Support travis_fold/travis_time. Matching pairs of these allow Travis CI
to collapse the output in between. This greatly cut down the unnecessary
"successful" output one need to scroll through before finding the failed
statement.
When -Z profile is passed, the GCDAProfiling LLVM pass is added
to the pipeline, which uses debug information to instrument the IR.
After compiling with -Z profile, the $(OUT_DIR)/$(CRATE_NAME).gcno
file is created, containing initial profiling information.
After running the program built, the $(OUT_DIR)/$(CRATE_NAME).gcda
file is created, containing branch counters.
The created *.gcno and *.gcda files can be processed using
the "llvm-cov gcov" and "lcov" tools. The profiling data LLVM
generates does not faithfully follow the GCC's format for *.gcno
and *.gcda files, and so it will probably not work with other tools
(such as gcov itself) that consume these files.
Add a distcheck for rust-src completeness
This is for the last commit of #41546. For some reason, @bors only saw the first two commits, and wouldn't approve the last even when explicitly directed so.
r? @alexcrichton
We've got a freshly minted beta compiler, let's update to use that on nightly!
This has a few other changes associated with it as well
* A bump to the rustc version number (to 1.19.0)
* Movement of the `cargo` and `rls` submodules to their "proper" location in
`src/tools/{cargo,rls}`. Now that Cargo workspaces support the `exclude`
option this can work.
* Updates of the `cargo` and `rls` submodules to their master branches.
* Tweak to the `src/stage0.txt` format to be more amenable for Cargo version
numbers. On the beta channel Cargo will bootstrap from a different version
than rustc (e.g. the version numbers are different), so we need different
configuration for this.
* Addition of `dev` as a readable key in the `src/stage0.txt` format. If present
then stage0 compilers are downloaded from `dev-static.rust-lang.org` instead
of `static.rust-lang.org`. This is added to accomodate our updated release
process with Travis and AppVeyor.
Currently our slowest test suite on android, run-pass, takes over 5 times longer
than the x86_64 component (~400 -> ~2200s). Typically QEMU emulation does indeed
add overhead, but not 5x for this kind of workload. One of the slowest parts of
the Android process is that *compilation* happens serially. Tests themselves
need to run single-threaded on the emulator (due to how the test harness works)
and this forces the compiles themselves to be single threaded.
Now Travis gives us more than one core per machine, so it'd be much better if we
could take advantage of them! The emulator itself is still fundamentally
single-threaded, but we should see a nice speedup by sending binaries for it to
run much more quickly.
It turns out that we've already got all the tools to do this in-tree. The
qemu-test-{server,client} that are in use for the ARM Linux testing are a
perfect match for the Android emulator. This commit migrates the custom adb
management code in compiletest/rustbuild to the same qemu-test-{server,client}
implementation that ARM Linux uses.
This allows us to lift the parallelism restriction on the compiletest test
suites, namely run-pass. Consequently although we'll still basically run the
tests themselves in single threaded mode we'll be able to compile all of them in
parallel, keeping the pipeline much more full and using more cores for the work
at hand. Additionally the architecture here should be a bit speedier as it
should have less overhead than adb which is a whole new process on both the host
and the emulator!
Locally on an 8 core machine I've seen the run-pass test suite speed up from
taking nearly an hour to only taking 6 minutes. I don't think we'll see quite a
drastic speedup on Travis but I'm hoping this change can place the Android tests
well below 2 hours instead of just above 2 hours.
Because the client/server here are now repurposed for more than just QEMU,
they've been renamed to `remote-test-{server,client}`.
Note that this PR does not currently modify how debuginfo tests are executed on
Android. While parallelizable it wouldn't be quite as easy, so that's left to
another day. Thankfully that test suite is much smaller than the run-pass test
suite.
As a final fix I discovered that the ARM and Android test suites were actually
running all library unit tests (e.g. stdtest, coretest, etc) twice. I've
corrected that to only run tests once which should also give a nice boost in
overall cycle time here.
Previously the `cargotest` suite would run some arbitrary revision of Cargo's
test suite, but now that we're bundling it in tree we should be running the
Cargo submodule's test suite instead.
As we continue to add more crates to the compiler and use them to implement
various features we want to be sure we're not accidentally expanding the API
surface area of the compiler! To that end this commit adds a new `run-make` test
which will attempt to `extern crate foo` all crates in the sysroot, verifying
that they're all unstable.
This commit discovered that the `std_shim` and `test_shim` crates were
accidentally stable and fixes the situation by deleting those shims. The shims
are no longer necessary due to changes in Cargo that have happened since they
were originally incepted.
Add support for test suites emulated in QEMU
This commit adds support to the build system to execute test suites that cannot
run natively but can instead run inside of a QEMU emulator. A proof-of-concept
builder was added for the `arm-unknown-linux-gnueabihf` target to show off how
this might work.
In general the architecture is to have a server running inside of the emulator
which a local client connects to. The protocol between the server/client
supports compiling tests on the host and running them on the target inside the
emulator.
Closes#33114
This commit adds support to the build system to execute test suites that cannot
run natively but can instead run inside of a QEMU emulator. A proof-of-concept
builder was added for the `arm-unknown-linux-gnueabihf` target to show off how
this might work.
In general the architecture is to have a server running inside of the emulator
which a local client connects to. The protocol between the server/client
supports compiling tests on the host and running them on the target inside the
emulator.
Closes#33114
I've been noticing some spurious recompiles of the final stage on Travis lately
and in debugging them I found a case where we were a little to eager to update
a stamp file due to the build_helper library being introduced during the testing
phase.
Part of the rustbuild system detects when libstd is recompiled and automatically
cleans out future directories to ensure that dirtyness propagation works. To do
this rustbuild doesn't know the artifact name of the standard library so it just
probes everything in the target directory, looking to see if anything changed.
The problem here happened where:
* First, rustbuild would compile everything (a normal build)
* Next, rustbuild would run all tests
* During testing, the libbuild_helper library was introduced into the target
directory, making it look like a change happened because a file is newer
than the newest was before
* Detecting a change, the next compilation would then cause rustbuild to clean
out old artifacts and recompile everything again.
This commit fixes this problem by correcting rustbuild to just not test the
build_helper crate at all. This crate doesn't have any unit tests, nor is it
intended to. That way the target directories should stay the same throughout
testing after a previous build.
This commit starts adding the infrastructure for uploading release artifacts
from AppVeyor/Travis on each commit. The idea is that eventually we'll upload a
full release to AppVeyor/Travis in accordance with plans [outlined earlier].
Right now this configures Travis/Appveyor to upload all tarballs in the `dist`
directory, and various images are updated to actually produce tarballs in these
directories. These are nowhere near ready to be actual release artifacts, but
this should allow us to play around with it and test it out. Once this commit
lands we should start seeing artifacts uploaded on each commit.
[outlined earlier]: https://internals.rust-lang.org/t/rust-ci-release-infrastructure-changes/4489
This commit optimizes the compile time for creating tarballs of cross-host
compilers and as a proof of concept adds two to the standard Travis matrix. Much
of this commit is further refactoring and refining of the `step.rs` definitions
along with the interpretation of `--target` and `--host` flags. This has gotten
confusing enough that I've also added a small test suite to
`src/bootstrap/step.rs` to ensure what we're doing works and doesn't regress.
After this commit when you execute:
./x.py dist --host $MY_HOST --target $MY_HOST
the build system will compile two compilers. The first is for the build platform
and the second is for the host platform. This second compiler is then packaged
up and placed into `build/dist` and is ready to go. With a fully cached LLVM and
docker image I was able to create a cross-host compiler in around 20 minutes
locally.
Eventually we plan to add a whole litany of cross-host entries to the Travis
matrix, but for now we're just adding a few before we eat up all the extra
capacity.
cc #38531
Gate on distcheck on Travis
This commit adds a new entry to the Travis matrix to gate on distcheck, the illustrious test process that has historically taken *8 hours* to complete and also breaks all the time on nightly. By adding it to Travis we should hope to never see nightly breakage (like https://github.com/rust-lang/rust/issues/38690) because of this ever again!
"But wait, surely we can't wait 8 hours for all PRs!" you might be thinking, and you are indeed correct. The distcheck added here is much more optimized for speed than the old buildbot instances for a number of reasons:
* We're not building *two host compilers* beforehand. The current distcheck bot does a cross for i686 Linux and x86_64 Linux before it actually runs distcheck, building 6 compilers and LLVM twice. None of this is done in parallel as well (e.g. `-j1`). Not doing any of this work will be a huge win!
* We're using sccache to compile LLVM, so it should be much faster. Distcheck on the bots didn't cache LLVM well and rebuilt it every time.
All in all, this version of "distcheck" should be exactly like other matrix entries that run tests except that it's a *little* slower to start as it has to create the source tarball then rebuild the build system in the distcheck dir. Overall this should be well under the 2 hours that Android is currently taking anyway.
Closes https://github.com/rust-lang/rust/issues/38691
rustbuild: Compile all support tools in stage0
This commit changes all tools and such to get compiled in stage0, not in
later stages. The purpose of this commit is to cut down dependencies on later
stages for future modifications to the build system. Notably we're going to be
adding builders that produce a full suite of cross-compiled artifacts for a
particular host, and that shouldn't compile the `x86_64-unknown-linux-gnu`
compiler more than once. Currently dependencies on, for example, the error index
end up compiling the `x86_64-unknown-linux-gnu` compiler more than necessary.
As a result here we move many dependencies on these tools to being produced by a
stage0 compiler, not a stage1+ compiler. None of these tools actually need to be
staged at all, so they'll exhibit consistent behavior across the stages.
The android-copy-libs step is crucial for running tests on the Android target as
it copies necessary scripts and such to the emulator. We must run that before
running any tests there, but we erroneously only did it for compiletest test
suites!
This commit adds a new entry to the Travis matrix which performs a "distcheck",
which basically means that we create a tarball, extract that tarball, and then
build/test inside there. This ensures that the tarballs we produce are actually
able to be built/tested!
Along the way this also updates the rustbuild distcheck definition to propagate
the configure args from the top-level invocation.
Closes#38691
This commit changes all tools and such to get compiled in stage0, not in
later stages. The purpose of this commit is to cut down dependencies on later
stages for future modifications to the build system. Notably we're going to be
adding builders that produce a full suite of cross-compiled artifacts for a
particular host, and that shouldn't compile the `x86_64-unknown-linux-gnu`
compiler more than once. Currently dependencies on, for example, the error index
end up compiling the `x86_64-unknown-linux-gnu` compiler more than necessary.
As a result here we move many dependencies on these tools to being produced by a
stage0 compiler, not a stage1+ compiler. None of these tools actually need to be
staged at all, so they'll exhibit consistent behavior across the stages.
This commit switches the rustbuild build system to compiling the
compiler twice for a normal bootstrap rather than the historical three
times.
Rust is a bootstrapped language which means that a previous version of
the compiler is used to build the next version of the compiler. Over
time, however, we change many parts of compiler artifacts such as the
metadata format, symbol names, etc. These changes make artifacts from
one compiler incompatible from another compiler. Consequently if a
compiler wants to be able to use some artifacts then it itself must have
compiled the artifacts.
Historically the rustc build system has achieved this by compiling the
compiler three times:
* An older compiler (stage0) is downloaded to kick off the chain.
* This compiler now compiles a new compiler (stage1)
* The stage1 compiler then compiles another compiler (stage2)
* Finally, the stage2 compiler needs libraries to link against, so it
compiles all the libraries again.
This entire process amounts in compiling the compiler three times.
Additionally, this process always guarantees that the Rust source tree
can compile itself because the stage2 compiler (created by a freshly
created compiler) would successfully compile itself again. This
property, ensuring Rust can compile itself, is quite important!
In general, though, this third compilation is not required for general
purpose development on the compiler. The third compiler (stage2) can
reuse the libraries that were created during the second compile. In
other words, the second compilation can produce both a compiler and the
libraries that compiler will use. These artifacts *must* be compatible
due to the way plugins work today anyway, and they were created by the
same source code so they *should* be compatible as well.
So given all that, this commit switches the default build process to
only compile the compiler three times, avoiding this third compilation
by copying artifacts from the previous one. Along the way a new entry in
the Travis matrix was also added to ensure that our full bootstrap can
succeed. This entry does not run tests, though, as it should not be
necessary.
To restore the old behavior of a full bootstrap (three compiles) you can
either pass:
./configure --enable-full-bootstrap
or if you're using config.toml:
[build]
full-bootstrap = true
Overall this will hopefully be an easy 33% win in build times of the
compiler. If we do 33% less work we should be 33% faster! This in turn
should affect cycle times and such on Travis and AppVeyor positively as
well as making it easier to work on the compiler itself.
adaptation to rustbuild for openbsd
Since the switch to rustbuild, the build for openbsd is broken:
- [X] `ar` inference based on compiler name is wrong (OpenBSD usually use `egcc`, but `ear` doesn't exist)
- [X] `make` isn't GNU-make under OpenBSD (and others BSD platforms)
- [x] `stdc++` isn't the right stdc++ library to link with (it should be `estdc++`)
- [x] corrects tests that don't pass anymore (problems related to rustbuild)
r? @alexcrichton
