Stabilize `unsafe_op_in_unsafe_fn` lint
This makes it possible to override the level of the `unsafe_op_in_unsafe_fn`, as proposed in https://github.com/rust-lang/rust/issues/71668#issuecomment-729770896.
Tracking issue: #71668
r? ```@nikomatsakis``` cc ```@SimonSapin``` ```@RalfJung```
# Stabilization report
This is a stabilization report for `#![feature(unsafe_block_in_unsafe_fn)]`.
## Summary
Currently, the body of unsafe functions is an unsafe block, i.e. you can perform unsafe operations inside.
The `unsafe_op_in_unsafe_fn` lint, stabilized here, can be used to change this behavior, so performing unsafe operations in unsafe functions requires an unsafe block.
For now, the lint is allow-by-default, which means that this PR does not change anything without overriding the lint level.
For more information, see [RFC 2585](https://github.com/rust-lang/rfcs/blob/master/text/2585-unsafe-block-in-unsafe-fn.md)
### Example
```rust
// An `unsafe fn` for demonstration purposes.
// Calling this is an unsafe operation.
unsafe fn unsf() {}
// #[allow(unsafe_op_in_unsafe_fn)] by default,
// the behavior of `unsafe fn` is unchanged
unsafe fn allowed() {
// Here, no `unsafe` block is needed to
// perform unsafe operations...
unsf();
// ...and any `unsafe` block is considered
// unused and is warned on by the compiler.
unsafe {
unsf();
}
}
#[warn(unsafe_op_in_unsafe_fn)]
unsafe fn warned() {
// Removing this `unsafe` block will
// cause the compiler to emit a warning.
// (Also, no "unused unsafe" warning will be emitted here.)
unsafe {
unsf();
}
}
#[deny(unsafe_op_in_unsafe_fn)]
unsafe fn denied() {
// Removing this `unsafe` block will
// cause a compilation error.
// (Also, no "unused unsafe" warning will be emitted here.)
unsafe {
unsf();
}
}
```
### Add debug assertion to check `AbiDatas` ordering
This makes a small alteration to `Abi::index`, so that we include a
debug assertion to check that the index we are returning corresponds
with the same abi in our data array.
This will help prevent ordering bugs in the future, which can
manifest in rather strange errors.
### Using exhaustive ABI matches
This slightly modifies the changes from our previous commits,
favoring exhaustive matches in place of `_ => ...` fall-through
arms.
This should help with maintenance in the future, when additional
ABI's are added, or when existing ABI's are modified.
### List all `-unwind` ABI's in unstable book
This updates the `c-unwind` page in the unstable book to list _all_
of the other ABI strings that are introduced by this feature gate.
Now, all of the ABI's specified by RFC 2945 are shown.
Co-authored-by: Amanieu d'Antras <amanieu@gmail.com>
Co-authored-by: Niko Matsakis <niko@alum.mit.edu>
### Changes
This commit implements unwind ABI's, specified in RFC 2945.
We adjust the `rustc_middle::ty::layout::fn_can_unwind` function,
used to compute whether or not a `FnAbi` object represents a
function that should be able to unwind when `panic=unwind` is in
use.
Changes are also made to
`rustc_mir_build::build::should_abort_on_panic` so that the
function ABI is used to determind whether it should abort, assuming
that the `panic=unwind` strategy is being used, and no explicit
unwind attribute was provided.
### Tests
Unit tests, checking that the behavior is correct for `C-unwind`,
`stdcall-unwind`, `system-unwind`, and `thiscall-unwind`, are
included. These alternative `unwind` ABI strings are specified in
RFC 2945, in the "_Other `unwind` ABI strings_" section.
Additionally, a test case is included to assert that the LLVM IR
generated for an external function defined with the `C-unwind` ABI
will be appropriately labeled with the `nounwind` LLVM attribute
when the `panic=abort` compilation flag is used.
### Ignore Directives
This commit uses `ignore-*` directives in two of our `*-unwind` ABI
test cases.
Specifically, the `stdcall-unwind` and `thiscall-unwind` test cases
ignore architectures that do not support `stdcall` and `thiscall`,
respectively.
These directives are cribbed from
`src/test/ui/c-variadic/variadic-ffi-1.rs` for `stdcall`, and
`src/test/ui/extern/extern-thiscall.rs` for `thiscall`.
### Overview
This commit begins the implementation work for RFC 2945. For more
information, see the rendered RFC [1] and tracking issue [2].
A boolean `unwind` payload is added to the `C`, `System`, `Stdcall`,
and `Thiscall` variants, marking whether unwinding across FFI
boundaries is acceptable. The cases where each of these variants'
`unwind` member is true correspond with the `C-unwind`,
`system-unwind`, `stdcall-unwind`, and `thiscall-unwind` ABI strings
introduced in RFC 2945 [3].
### Feature Gate and Unstable Book
This commit adds a `c_unwind` feature gate for the new ABI strings.
Tests for this feature gate are included in `src/test/ui/c-unwind/`,
which ensure that this feature gate works correctly for each of the
new ABIs.
A new language features entry in the unstable book is added as well.
### Further Work To Be Done
This commit does not proceed to implement the new unwinding ABIs,
and is intentionally scoped specifically to *defining* the ABIs and
their feature flag.
### One Note on Test Churn
This will lead to some test churn, in re-blessing hash tests, as the
deleted comment in `src/librustc_target/spec/abi.rs` mentioned,
because we can no longer guarantee the ordering of the `Abi`
variants.
While this is a downside, this decision was made bearing in mind
that RFC 2945 states the following, in the "Other `unwind` Strings"
section [3]:
> More unwind variants of existing ABI strings may be introduced,
> with the same semantics, without an additional RFC.
Adding a new variant for each of these cases, rather than specifying
a payload for a given ABI, would quickly become untenable, and make
working with the `Abi` enum prone to mistakes.
This approach encodes the unwinding information *into* a given ABI,
to account for the future possibility of other `-unwind` ABI
strings.
### Ignore Directives
`ignore-*` directives are used in two of our `*-unwind` ABI test
cases.
Specifically, the `stdcall-unwind` and `thiscall-unwind` test cases
ignore architectures that do not support `stdcall` and
`thiscall`, respectively.
These directives are cribbed from
`src/test/ui/c-variadic/variadic-ffi-1.rs` for `stdcall`, and
`src/test/ui/extern/extern-thiscall.rs` for `thiscall`.
This would otherwise fail on some targets, see:
fcf697f902
### Footnotes
[1]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md
[2]: https://github.com/rust-lang/rust/issues/74990
[3]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md#other-unwind-abi-strings
This updates all places where match branches check on StatementKind or UseContext.
This doesn't properly implement them, but adds TODOs where they are, and also adds some best
guesses to what they should be in some cases.
I'm still not totally sure if this is the right way to implement the memcpy, but that portion
compiles correctly now. Now to fix the compile errors everywhere else :).
Change x64 size checks to not apply to x32.
Rust contains various size checks conditional on target_arch = "x86_64", but these checks were never intended to apply to x86_64-unknown-linux-gnux32. Add target_pointer_width = "64" to the conditions.
Rust contains various size checks conditional on target_arch = "x86_64",
but these checks were never intended to apply to
x86_64-unknown-linux-gnux32. Add target_pointer_width = "64" to the
conditions.
Implement NOOP_METHOD_CALL lint
Implements the beginnings of https://github.com/rust-lang/lang-team/issues/67 - a lint for detecting noop method calls (e.g, calling `<&T as Clone>::clone()` when `T: !Clone`).
This PR does not fully realize the vision and has a few limitations that need to be addressed either before merging or in subsequent PRs:
* [ ] No UFCS support
* [ ] The warning message is pretty plain
* [ ] Doesn't work for `ToOwned`
The implementation uses [`Instance::resolve`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/instance/struct.Instance.html#method.resolve) which is normally later in the compiler. It seems that there are some invariants that this function relies on that we try our best to respect. For instance, it expects substitutions to have happened, which haven't yet performed, but we check first for `needs_subst` to ensure we're dealing with a monomorphic type.
Thank you to ```@davidtwco,``` ```@Aaron1011,``` and ```@wesleywiser``` for helping me at various points through out this PR ❤️.
Skip Ty w/o infer ty/const in trait select
Remove some allocations & also add `skip_current_subtree` to skip subtrees with no inferred items.
r? `@eddyb` since marked in the FIXME
Make the `Query` enum a simple struct.
A lot of code in `rustc_query_system` is generic over it, only to encode an exceptional error case: query cycles.
The delayed computations are now done at cycle detection.
MIR-OPT: Pass to deduplicate blocks
This pass finds basic blocks that are completely equal,
and replaces all uses with just one of them.
```bash
$ RUSTC_LOG=rustc_mir::transform::deduplicate_blocks ./x.py build --stage 2 | grep "SUCCESS: Replacing: " > log
...
$ cat log | wc -l
23875
```
Fix sizes of repr(C) enums on hexagon
Enums on hexagon use a smallest size (but at least 1 byte) that fits all
the enumeration values. This is unlike many other ABIs where enums are
at least 32 bits.
Fixes#82100
Enums on hexagon use a smallest size (but at least 1 byte) that fits all
the enumeration values. This is unlike many other ABIs where enums are
at least 32 bits.
Rollup of 7 pull requests
Successful merges:
- #80595 (`impl PartialEq<Punct> for char`; symmetry for #78636)
- #81991 (Fix panic in 'remove semicolon' when types are not local)
- #82176 (fix MIR fn-ptr pretty-printing)
- #82244 (Keep consistency in example for Stdin StdinLock)
- #82260 (rustc: Show ``@path`` usage in stable)
- #82316 (Fix minor mistake in LTO docs.)
- #82332 (Don't generate src link on dummy spans)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
fix MIR fn-ptr pretty-printing
An uninitialized function pointer would get printed as `{{uninit fn()}` (notice the unbalanced parentheses), and a dangling fn ptr would ICE. This fixes both of that.
However, I have no idea how to add tests for this.
Also, I don't understand this MIR pretty-printing code. Somehow the print function `pretty_print_const_scalar` actually *returns* a transformed form of the const (but there is no doc comment explaining what is being returned); some match arms do `p!` while others do `self =`, and there's a wild mixture of `p!` and `write!`... all very mysterious and confusing.^^
r? ``@oli-obk``
