ClientServerProject/Public/IndustryEthernet.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>IndustryEthernet</name>
    </assembly>
    <members>
        <member name="T:IndustryEthernet.File_Save">
            <summary>
            用来保存的文件信息类
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.FileName">
            <summary>
            文件的名称
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.FileSize">
            <summary>
            文件的大小
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.FileFacory">
            <summary>
            文件所属的工厂大类
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.FileGroup">
            <summary>
            文件的类别
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.FileId">
            <summary>
            文件所属的设备ID号
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.UploadName">
            <summary>
            文件的上传人
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.UploadDate">
            <summary>
            文件的上传日期
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.FileNote">
            <summary>
            文件的描述，说明备注
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.FilePath">
            <summary>
            文件在服务器的实际存储路径
            </summary>
        </member>
        <member name="P:IndustryEthernet.File_Save.FileDownloadTimes">
            <summary>
            文件被下载的次数
            </summary>
        </member>
        <member name="T:IndustryEthernet.Net_File_Server">
            <summary>
            文件传送类服务器，仅仅负责数据传送部分，不负责数据库的存储
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_File_Server.FilesPath">
            <summary>
            所有文件存储的根目录 默认D盘Files文件夹
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_File_Server.IsStarted">
            <summary>
            服务器引擎是否启动，防止冗余调用
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_File_Server.Server_Start(System.Int32)">
            <summary>
            启动服务器的引擎
            </summary>
            <param name="port">指定一个端口号</param>
        </member>
        <member name="M:IndustryEthernet.Net_File_Server.ReceiveCallBack(System.IAsyncResult)">
            <summary>
            用来确认文件是否发送完成的
            </summary>
            <param name="ir"></param>
        </member>
        <member name="F:IndustryEthernet.Net_File_Server.log_record">
            <summary>
            日志保存类
            </summary>
        </member>
        <member name="T:IndustryEthernet.InfoTcp">
            <summary>
            用于超时验证的类
            </summary>
        </member>
        <member name="P:IndustryEthernet.InfoTcp.ConnectTime">
            <summary>
            开始请求的时间
            </summary>
        </member>
        <member name="P:IndustryEthernet.InfoTcp.IsConnect">
            <summary>
            是否连接成功
            </summary>
        </member>
        <member name="P:IndustryEthernet.InfoTcp.Worksocket">
            <summary>
            连接的socket
            </summary>
        </member>
        <member name="T:IndustryEthernet.HU_DES">
            <summary>
            整个系统的加密解密块
            不对外进行开放，只用于网络模块的加密解密
            </summary>
        </member>
        <member name="M:IndustryEthernet.HU_DES.Encrypt(System.Byte[])">
            <summary>
            进行DES加密。
            </summary>
            <param name="pToEncrypt">要加密的字节流</param>
            <returns>以Base64格式返回的加密字符串。</returns>
        </member>
        <member name="M:IndustryEthernet.HU_DES.Decrypt(System.Byte[])">
            <summary>
            进行DES解密。
            </summary>
            <param name="pToDecrypt">要解密的字符数组</param>
            <returns>已解密的字符串。</returns>
        </member>
        <member name="T:IndustryEthernet.SocketBase">
            <summary>
            所有网络通信类的基类，提供一些基础的服务
            </summary>
        </member>
        <member name="M:IndustryEthernet.SocketBase.ReadFromSocket(System.Net.Sockets.Socket,System.Int32)">
            <summary>
            读取socket数据的基础方法
            </summary>
            <param name="socket">通信对象</param>
            <param name="receive">接收的长度</param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.SocketBase.ReadFromSocketAndWriteStream(System.IO.FileStream,System.Net.Sockets.Socket,System.Int32,System.Boolean)">
            <summary>
            读取socket指定长度数据并写入文件流中
            </summary>
            <param name="fs">支持写入的文件流</param>
            <param name="socket">连接的套接字</param>
            <param name="receive">指定接收长度</param>
            <param name="is_response">是否回发进度</param>
        </member>
        <member name="M:IndustryEthernet.SocketBase.ReadFromSocketAndWriteStream(System.IO.FileStream,IndustryEthernet.FileStateOne,System.Int32,System.Boolean)">
            <summary>
            读取socket指定长度数据并写入文件流中
            </summary>
            <param name="fs">支持写入的文件流</param>
            <param name="receive">指定接收长度</param>
            <param name="is_response">是否回发进度</param>
            <param name="stateone">套接字的属性</param>
        </member>
        <member name="M:IndustryEthernet.SocketBase.ReadFromStreamAndWriteSocket(System.IO.FileStream,System.Net.Sockets.Socket,System.Int32)">
            <summary>
            读取文件流并将数据写入socket
            </summary>
            <param name="fs">文件流</param>
            <param name="socket">连接的套接字</param>
            <param name="send_length">要写入的长度</param>
        </member>
        <member name="M:IndustryEthernet.SocketBase.IsTwoBytesEquel(System.Byte[],System.Byte[])">
            <summary>
            判断两个字节是否相同
            </summary>
            <param name="b1">第一个字节</param>
            <param name="b2">第二个字节</param>
            <returns></returns>
        </member>
        <member name="P:IndustryEthernet.SocketBase.ConnectTimeout">
            <summary>
            网络访问中的超时时间，单位：毫秒，默认值2200
            </summary>
        </member>
        <member name="P:IndustryEthernet.SocketBase.KeyToken">
            <summary>
            该网络通信验证类的身份令牌
            </summary>
        </member>
        <member name="M:IndustryEthernet.SocketBase.ThreadPoolCheckConnect(System.Object)">
            <summary>
            检查超时的子线程
            </summary>
            <param name="obj"></param>
        </member>
        <member name="T:IndustryEthernet.SocketBase.IEDelegate">
            <summary>
            不带参数的委托
            </summary>
        </member>
        <member name="T:IndustryEthernet.SocketBase.IEDelegate`1">
            <summary>
            带一个参数的委托
            </summary>
            <typeparam name="T1">T1</typeparam>
            <param name="object1"></param>
        </member>
        <member name="T:IndustryEthernet.SocketBase.IEDelegate`2">
            <summary>
            带二个参数的委托
            </summary>
            <typeparam name="T1">T1</typeparam>
            <typeparam name="T2">T2</typeparam>
            <param name="object1">object1</param>
            <param name="object2">object2</param>
        </member>
        <member name="T:IndustryEthernet.SocketBase.IEDelegate`3">
            <summary>
            带三个参数的委托
            </summary>
            <typeparam name="T1">T1</typeparam>
            <typeparam name="T2">T2</typeparam>
            <typeparam name="T3">T3</typeparam>
            <param name="object1">object1</param>
            <param name="object2">object2</param>
            <param name="object3">object3</param>
        </member>
        <member name="M:IndustryEthernet.SocketBase.ByteToHexString(System.Byte[])">
            <summary>
            将字节数组转化为16进制的字符串
            </summary>
            <param name="InBytes">字节数组</param>
            <returns>字符串</returns>
        </member>
        <member name="F:IndustryEthernet.SocketBase.ConnectFailed">
            <summary>
            连接失败的文本
            </summary>
        </member>
        <member name="F:IndustryEthernet.SocketBase.TransportFailed">
            <summary>
            数据传输异常的文本
            </summary>
        </member>
        <member name="T:IndustryEthernet.SocketServerBase">
            <summary>
            所有服务器类对象的基类，添加了一些服务器属性
            </summary>
        </member>
        <member name="F:IndustryEthernet.SocketServerBase.hu_socket_server">
            <summary>
            基础服务的套接字对象
            </summary>
        </member>
        <member name="P:IndustryEthernet.SocketServerBase.IsStarted">
            <summary>
            服务器引擎是否启动
            </summary>
        </member>
        <member name="M:IndustryEthernet.SocketServerBase.ThreadPoolLogin(System.Object)">
            <summary>
            登录回调方法
            </summary>
            <param name="obj"></param>
        </member>
        <member name="M:IndustryEthernet.SocketServerBase.Server_Start(System.Int32)">
            <summary>
            启动服务器的引擎
            </summary>
            <param name="port">指定一个端口号</param>
        </member>
        <member name="F:IndustryEthernet.SocketServerBase.log_record">
            <summary>
            日志保存类
            </summary>
        </member>
        <member name="T:IndustryEthernet.HuTcpState">
            <summary>
            异步多客户端系统的套接字对象
            </summary>
        </member>
        <member name="P:IndustryEthernet.HuTcpState._HeadCode_Bytes">
            <summary>
            数据信息的接收的数据头
            </summary>
        </member>
        <member name="P:IndustryEthernet.HuTcpState._Work_Socket">
            <summary>
            此次连接的套接字
            </summary>
        </member>
        <member name="P:IndustryEthernet.HuTcpState._Head_Length">
            <summary>
            信息头的数据长度
            </summary>
        </member>
        <member name="P:IndustryEthernet.HuTcpState._IpEnd_Point">
            <summary>
            此连接对象连接的远程客户端
            </summary>
        </member>
        <member name="P:IndustryEthernet.HuTcpState._Login_Alias">
            <summary>
            远程对象的别名
            </summary>
        </member>
        <member name="P:IndustryEthernet.HuTcpState._Heart_Time">
            <summary>
            心跳验证的时间点
            </summary>
        </member>
        <member name="T:IndustryEthernet.Hu_Net_Protocol">
            <summary>
            服务器客户端约定的暗号协议
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_Check_Secends">
            <summary>
            用于心跳程序的暗号信息
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_String_Text">
            <summary>
            说明发送的只是文本信息
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_User_Bytes">
            <summary>
            发送的数据就是普通的字节数组
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_Client_Quit">
            <summary>
            客户端退出消息
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_Client_Refuse_Login">
            <summary>
            因为客户端达到上限而拒绝登录
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_Client_Allow_Login">
            <summary>
            允许客户端登录到服务器
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_File_Download">
            <summary>
            请求文件下载的暗号
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_File_Upload">
            <summary>
            请求文件上传的暗号
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_File_Check_Right">
            <summary>
            文件校验成功
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_File_Check_Error">
            <summary>
            文件校验失败
            </summary>
        </member>
        <member name="P:IndustryEthernet.Hu_Net_Protocol.HU_Protocol_File_Save_Error">
            <summary>
            文件保存失败
            </summary>
        </member>
        <member name="M:IndustryEthernet.Hu_Net_Protocol.CommandBytes(System.String)">
            <summary>
            根据字符串数据生成带有暗号头的数据
            </summary>
            <param name="str_Sended"></param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.Hu_Net_Protocol.CommandBytes(System.Byte[])">
            <summary>
            根据字节数据生成带有暗号头的数据
            </summary>
            <param name="Sended"></param>
            <returns></returns>
        </member>
        <member name="T:IndustryEthernet.OperateResultBase">
            <summary>
            操作结果的类
            </summary>
        </member>
        <member name="P:IndustryEthernet.OperateResultBase.IsSuccess">
            <summary>
            指示本次访问是否成功
            </summary>
        </member>
        <member name="P:IndustryEthernet.OperateResultBase.Message">
            <summary>
            失败访问时，包含的一些信息描述
            </summary>
        </member>
        <member name="P:IndustryEthernet.OperateResultBase.ErrorCode">
            <summary>
            访问失败时的错误代码
            </summary>
        </member>
        <member name="M:IndustryEthernet.OperateResultBase.ToMessageShowString">
            <summary>
            获取错误代号及文本描述
            </summary>
            <returns></returns>
        </member>
        <member name="T:IndustryEthernet.OperateResultString">
            <summary>
            操作结果的字符串类
            </summary>
        </member>
        <member name="P:IndustryEthernet.OperateResultString.Content">
            <summary>
            实际的数据
            </summary>
        </member>
        <member name="T:IndustryEthernet.OperateResultBytes">
            <summary>
            操作结果的字节数组类
            </summary>
        </member>
        <member name="P:IndustryEthernet.OperateResultBytes.Content">
            <summary>
            实际的数据
            </summary>
        </member>
        <member name="T:IndustryEthernet.StateOneBase">
            <summary>
            系统套接字基类，提供一些基础服务
            </summary>
        </member>
        <member name="F:IndustryEthernet.StateOneBase.ReceiveBuffer">
            <summary>
            用来缓冲长度的字节
            </summary>
        </member>
        <member name="P:IndustryEthernet.StateOneBase.AlreadyReceivedLength">
            <summary>
            已经接收或上传的数据长度，用来判断接收是否完成的依据
            </summary>
        </member>
        <member name="F:IndustryEthernet.StateOneBase.SendBuffer">
            <summary>
            用于发送数据的
            </summary>
        </member>
        <member name="P:IndustryEthernet.StateOneBase.AlreadySendLength">
            <summary>
            已经发送的数据长度，用来判定是否发送完成的依据
            </summary>
        </member>
        <member name="F:IndustryEthernet.StateOneBase._WorkSocket">
            <summary>
            通信用的socket
            </summary>
        </member>
        <member name="P:IndustryEthernet.StateOneBase.ConnectTime">
            <summary>
            套接字的连接时间
            </summary>
        </member>
        <member name="M:IndustryEthernet.StateOneBase.BytesSizeToString(System.Int32)">
            <summary>
            获取指定长度的数据的文本描述
            </summary>
            <param name="size"></param>
            <returns></returns>
        </member>
        <member name="T:IndustryEthernet.HuStateOne">
            <summary>
            同步服务器的使用的套接字对象
            </summary>
        </member>
        <member name="F:IndustryEthernet.HuStateOne._HeadBytes">
            <summary>
            用于接收密令头
            </summary>
        </member>
        <member name="P:IndustryEthernet.HuStateOne.Lenght">
            <summary>
            密令头长度
            </summary>
        </member>
        <member name="M:IndustryEthernet.HuStateOne.Close">
            <summary>
            关闭网络资源
            </summary>
        </member>
        <member name="T:IndustryEthernet.FileStateOne">
            <summary>
            用于文件传输的时候的封装对象
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileStateOne.IsFinishOperate">
            <summary>
            指示本操作是否完成，也可能因为意外终止
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileStateOne.FileContentLength">
            <summary>
            文件的长度
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileStateOne.LastReceivedLength">
            <summary>
            上次已接收或已上传的长度，用来计算网速
            </summary>
        </member>
        <member name="M:IndustryEthernet.FileStateOne.RenderInformation(System.Boolean)">
            <summary>
            用于显示的消息内容
            </summary>
            <param name="is_download"></param>
            <returns></returns>
        </member>
        <member name="T:IndustryEthernet.Log_Record">
            <summary>
            日誌記錄的類，用來方便的記錄一些系統的文本日誌
            該類具有兩種記錄日誌的方式，
            當記錄日誌相對頻繁的時候，請使用AddLog(string str)來記錄日誌
            </summary>
        </member>
        <member name="M:IndustryEthernet.Log_Record.#ctor">
            <summary>
            实例化一个日志纪录类对象
            </summary>
        </member>
        <member name="P:IndustryEthernet.Log_Record.log_save_path">
            <summary>
            日志记录的路径，如果没有设置将不进行保存
            </summary>
        </member>
        <member name="P:IndustryEthernet.Log_Record.lock_file_save">
            <summary>
            日誌文件保存時的線程鎖
            </summary>
        </member>
        <member name="P:IndustryEthernet.Log_Record.lock_list_save">
            <summary>
            日誌緩存列表的操作線程鎖
            </summary>
        </member>
        <member name="F:IndustryEthernet.Log_Record.all_save_wait">
            <summary>
            所有的等待保存的消息，包括主動添加的和之前保存失敗的
            </summary>
        </member>
        <member name="M:IndustryEthernet.Log_Record.WriteMessageToFile(System.String)">
            <summary>
            向文件中進行寫入最終的消息
            請確保文件路徑真實存在，該方法不對外開放
            </summary>
            <param name="str">要寫入的數據</param>
        </member>
        <member name="M:IndustryEthernet.Log_Record.LogSave(System.String)">
            <summary>
            用于内部保存日志内容的方法
            </summary>
            <param name="str"></param>
        </member>
        <member name="M:IndustryEthernet.Log_Record.AddLog(System.String)">
            <summary>
            增加一個需要保存的消息，在需要的时候调用LogSave存储
            </summary>
            <param name="str"></param>
        </member>
        <member name="M:IndustryEthernet.Log_Record.LogSave">
            <summary>
            當有列表信息時，調用該方法即可存儲所有的消息
            </summary>
        </member>
        <member name="M:IndustryEthernet.Log_Record.GetLogText">
            <summary>
            調用此方法可以獲取所有的日誌內容
            </summary>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.Log_Record.ClearLogText">
            <summary>
            用於清空日誌的所有內容，可從外部進行調用
            </summary>
        </member>
        <member name="T:IndustryEthernet.Net_Socket_Server">
            <summary>
            基于TCP的服务器引擎端核心类
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.server_socket">
            <summary>
            服务器最核心的用于侦听的套接字
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.Is_Server_Start">
            <summary>
            服务器系统是否启动
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.ConnectMax">
            <summary>
            所支持的同时在线客户端的最大数量
            商用限制1000个，最小10个
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.FormatClientOnline">
            <summary>
            客户端在线信息显示的格式化文本，如果自定义，必须#开头，
            示例："#IP:{0} Name:{1}"
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.AllClients">
            <summary>
            所有客户端的在线信息，使用#符号分隔开来
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.IsSaveLogClientLineChange">
            <summary>
            获取或设置服务器是否记录客户端上下线信息
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.ClientCount">
            <summary>
            所有在线客户端的数量
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.all_sockets_connect">
            <summary>
            所有的客户端连接的核心对象
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Server.lock_sockets_operate">
            <summary>
            客户端数组操作的线程锁
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Server.SocketStart(System.Int32)">
            <summary>
            启动系统
            </summary>
            <param name="_port">启动服务侦听端口</param>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Server.SocketStop">
            <summary>
            系统关闭
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Server.MessageAlerts">
            <summary>
            服务器的异常，启动，等等一般消息产生的时候，出发此事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Server.ClientOnline">
            <summary>
            当客户端上线的时候，触发此事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Server.ClientOffline">
            <summary>
            当客户端下线的时候，触发此事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Server.AcceptString">
            <summary>
            当接收到文本数据的时候,触发此事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Server.AcceptByte">
            <summary>
            当接收到字节数据的时候,触发此事件
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Server.Send(IndustryEthernet.HuTcpState,System.String)">
            <summary>
            服务器端用于数据发送文本的方法
            </summary>
            <param name="stateone">数据发送对象</param>
            <param name="str">发送的文本</param>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Server.Send(IndustryEthernet.HuTcpState,System.Byte[])">
            <summary>
            服务器端用于发送字节的方法
            </summary>
            <param name="stateone">数据发送对象</param>
            <param name="bytes">实际发送的数据</param>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Server.SendAllClients(System.String)">
            <summary>
            服务端用于发送所有数据到所有的客户端
            </summary>
            <param name="str"></param>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Server.SendAllClients(System.Byte[])">
            <summary>
            服务端用于发送所有数据到所有的客户端
            </summary>
            <param name="data">需要群发客户端的字节数据</param>
        </member>
        <member name="F:IndustryEthernet.Net_Socket_Server.LogReacord">
            <summary>
            日志存储类，用来存储日志信息
            </summary>
        </member>
        <member name="T:IndustryEthernet.Net_Socket_Client">
            <summary>
            基于TCP通信的客户端核心类
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Client.stateone">
            <summary>
            客户端的核心连接块
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Client.Is_Client_Start">
            <summary>
            客户端系统是否启动
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Client.Connect_Failed_Count">
            <summary>
            重连接失败的次数
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Client.Is_Client_Connecting">
            <summary>
            指示客户端是否处于正在连接服务器中
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Client.lock_connecting">
            <summary>
            登录服务器的判断锁
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Client.ClientAlias">
            <summary>
            客户端登录的标识名称，可以为ID号，也可以为登录名
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Socket_Client.EndPointServer">
            <summary>
            远程服务器的IP地址和端口
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Client.LoginSuccess">
            <summary>
            客户端启动成功的事件，重连成功也将触发此事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Client.LoginFailed">
            <summary>
            连接失败时触发的事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Client.MessageAlerts">
            <summary>
            服务器的异常，启动，等等一般消息产生的时候，出发此事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Client.AcceptString">
            <summary>
            当接收到文本数据的时候,触发此事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Socket_Client.AcceptByte">
            <summary>
            当接收到字节数据的时候,触发此事件
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Client.ClientClose">
            <summary>
            关闭该客户端引擎
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Client.ClientStart">
            <summary>
            启动客户端引擎，连接服务器系统
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Client.Send(System.String)">
            <summary>
            服务器端用于数据发送文本的方法
            </summary>
            <param name="str">发送的文本</param>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Client.Send(System.Byte[])">
            <summary>
            服务器端用于发送字节的方法
            </summary>
            <param name="bytes">实际发送的数据</param>
        </member>
        <member name="M:IndustryEthernet.Net_Socket_Client.ThreadHeartCheck">
            <summary>
            心跳线程的方法
            </summary>
        </member>
        <member name="T:IndustryEthernet.PlcNetBase">
            <summary>
            以太网模块访问的基类
            </summary>
        </member>
        <member name="P:IndustryEthernet.PlcNetBase.PortRead">
            <summary>
            读取数据的端口，默认为1000
            </summary>
        </member>
        <member name="P:IndustryEthernet.PlcNetBase.PortWrite">
            <summary>
            写入数据端口，默认为1001
            </summary>
        </member>
        <member name="P:IndustryEthernet.PlcNetBase.PLCIpAddress">
            <summary>
            远程PLC的IP地址，默认为192.168.0.2
            </summary>
        </member>
        <member name="M:IndustryEthernet.PlcNetBase.AddVoidHead(System.Byte[],System.Int32)">
            <summary>
            追加字节数据的头部空字节
            </summary>
            <param name="bytes">实际数据</param>
            <param name="length">追加的长度</param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.PlcNetBase.ManageBytesLength(System.Byte[],System.Int32)">
            <summary>
            控制字节长度，超出选择截断，不够补零
            </summary>
            <param name="bytes">字节数据</param>
            <param name="length">最终需要的目标长度</param>
            <returns>处理后的数据</returns>
        </member>
        <member name="M:IndustryEthernet.PlcNetBase.GetBytesFromArray(System.Int16[])">
            <summary>
            根据数据的数组返回真实的数据字节
            </summary>
            <param name="array"></param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.PlcNetBase.GetBytesFromArray(System.UInt16[])">
            <summary>
            根据数据的数据返回真实的数据字节
            </summary>
            <param name="array"></param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.PlcNetBase.GetArrayFromBytes(System.Byte[])">
            <summary>
            根据底层的数据情况返回转换后的数组
            </summary>
            <param name="bytes">真实的数据</param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.PlcNetBase.GetShortFromBytes(System.Byte[],System.Int32)">
            <summary>
            从指定的字节数据中提取指定位置的short值
            </summary>
            <param name="content">读取的字节数组</param>
            <param name="index">索引</param>
            <returns>实际值</returns>
        </member>
        <member name="T:IndustryEthernet.MelsecNet">
            <summary>
            数据访问类，用于计算机和三菱PLC的以太网模块通讯的类
            通讯协议为基于以太网的QnA兼容3E帧协议
            只支持同步访问方式，必须先配置网络参数
            </summary>
        </member>
        <member name="P:IndustryEthernet.MelsecNet.NetworkNumber">
            <summary>
            获取或设置PLC所在的网络号，一般都为0
            </summary>
        </member>
        <member name="P:IndustryEthernet.MelsecNet.NetworkStationNumber">
            <summary>
            获取或设置PLC所在网络的站号，一般都为0
            </summary>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.ReceiveBytesTranslate(System.Byte[])">
            <summary>
            当读取位数据时，进行相对的转化
            </summary>
            <param name="bytes"></param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.SingularTurnEven(System.Byte[])">
            <summary>
            根据字节数据进行补齐偶数位
            </summary>
            <param name="bytes">数据</param>
            <returns>补齐后的数据</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.ReadFromPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.UInt16)">
            <summary>
            从三菱PLC中读取想要的数据，返回读取结果
            </summary>
            <param name="type">想要读取的数据类型</param>
            <param name="address">读取数据的起始地址</param>
            <param name="lengh">读取的数据长度，字最大值960，位最大值7168</param>
            <returns>带数据头的字节数组</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.WriteAsciiStringIntoPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.String)">
            <summary>
            向PLC写入ASCII编码字符串数据，针对W,D的方式，数据为字符串
            </summary>
            <param name="type">写入的数据类型</param>
            <param name="address">初始地址</param>
            <param name="data">字符串数据信息</param>
            <returns>结果</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.WriteAsciiStringIntoPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.String,System.Int32)">
            <summary>
            向PLC写入指定长度ASCII编码字符串数据，超过截断，不够补0，针对W,D的方式，数据为字符串
            </summary>
            <param name="type">写入的数据类型</param>
            <param name="address">初始地址</param>
            <param name="data">字符串数据信息</param>
            <param name="length">指定写入长度，必须为偶数</param>
            <returns>结果</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.WriteUnicodeStringIntoPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.String)">
            <summary>
            使用Unicode编码向PLC写入字符串数据，针对W,D的方式，数据为字符串
            </summary>
            <param name="type">写入的数据类型</param>
            <param name="address">初始地址</param>
            <param name="data">字符串数据信息</param>
            <returns>结果</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.WriteUnicodeStringIntoPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.String,System.Int32)">
            <summary>
            使用Unicode编码向PLC写入指定长度的字符串数据，针对W,D的方式，数据为字符串
            </summary>
            <param name="type">写入的数据类型</param>
            <param name="address">初始地址</param>
            <param name="data">字符串数据信息</param>
            <param name="length">指定字符串的长度</param>
            <returns>结果</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.WriteIntoPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.Boolean[])">
            <summary>
            向PLC写入数据，针对X,Y,M,L的方式，数据为通断的信号
            data数组长度必须为偶数，否则报错
            </summary>
            <param name="type">写入的数据类型</param>
            <param name="address">初始地址</param>
            <param name="data">通断信号的数组</param>
            <exception cref="T:System.Exception"></exception>
            <returns>结果</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.WriteIntoPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.UInt16[])">
            <summary>
            向PLC写入数据，针对D和W的方式，数据格式为无符号的ushort数组
            </summary>
            <param name="type">写入的数据类型</param>
            <param name="address">初始地址</param>
            <param name="data">无符号的ushort数组</param>
            <returns>结果</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.WriteIntoPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.Int16[])">
            <summary>
            向PLC写入数据，针对D和W的方式，数据格式为有符号的short数组
            </summary>
            <param name="type">写入的数据类型</param>
            <param name="address">初始地址</param>
            <param name="data">有符号的short数组</param>
            <returns>结果</returns>
        </member>
        <member name="M:IndustryEthernet.MelsecNet.WriteIntoPLC(IndustryEthernet.MelsecDataType,System.UInt16,System.Byte[])">
            <summary>
            向PLC写入数据，数据格式为原始的字节类型
            </summary>
            <param name="type">写入的数据类型</param>
            <param name="address">初始地址</param>
            <param name="data">原始的字节数据</param>
            <returns>结果</returns>
        </member>
        <member name="T:IndustryEthernet.MelsecDataType">
            <summary>
            三菱PLC的数据类型，此处只包含了几个常用的类型
            X,Y,M,D,W,L
            </summary>
        </member>
        <member name="M:IndustryEthernet.MelsecDataType.#ctor(System.Byte,System.Byte)">
            <summary>
            如果您清楚类型代号，可以根据值进行扩展
            </summary>
            <param name="code">数据类型的代号</param>
            <param name="type">0或1，默认为0</param>
        </member>
        <member name="P:IndustryEthernet.MelsecDataType.DataCode">
            <summary>
            类型的代号值
            </summary>
        </member>
        <member name="P:IndustryEthernet.MelsecDataType.DataType">
            <summary>
            数据的类型，0代表按字，1代表按位
            </summary>
        </member>
        <member name="F:IndustryEthernet.MelsecDataType.X">
            <summary>
            X输入寄存器
            </summary>
        </member>
        <member name="F:IndustryEthernet.MelsecDataType.Y">
            <summary>
            Y输出寄存器
            </summary>
        </member>
        <member name="F:IndustryEthernet.MelsecDataType.M">
            <summary>
            M中间寄存器
            </summary>
        </member>
        <member name="F:IndustryEthernet.MelsecDataType.D">
            <summary>
            D数据寄存器
            </summary>
        </member>
        <member name="F:IndustryEthernet.MelsecDataType.W">
            <summary>
            W链接寄存器
            </summary>
        </member>
        <member name="F:IndustryEthernet.MelsecDataType.L">
            <summary>
            L锁存继电器
            </summary>
        </member>
        <member name="T:IndustryEthernet.SiemensNet">
            <summary>
            数据访问类，用于计算机和西门子PLC的以太网模块通讯的类
            通讯协议为基于以太网的FETCH/WRITE协议
            想要访问成功，必须先配置PLC的网络
            </summary>
        </member>
        <member name="M:IndustryEthernet.SiemensNet.ReadFromPLC(IndustryEthernet.SiemensDataType,System.UInt16,System.UInt16)">
            <summary>
            从西门子PLC中读取想要的数据，返回结果类说明
            </summary>
            <param name="type">想要读取的数据类型</param>
            <param name="address">读取数据的起始地址</param>
            <param name="lengh">读取的数据长度</param>
            <returns>返回读取结果</returns>
        </member>
        <member name="M:IndustryEthernet.SiemensNet.WriteAsciiStringIntoPLC(IndustryEthernet.SiemensDataType,System.UInt16,System.String)">
            <summary>
            向PLC中写入字符串，编码格式为ASCII
            </summary>
            <param name="type">要写入的数据类型</param>
            <param name="address">要写入的数据地址</param>
            <param name="data">要写入的实际数据</param>
            <returns>返回读取结果</returns>
        </member>
        <member name="M:IndustryEthernet.SiemensNet.WriteAsciiStringIntoPLC(IndustryEthernet.SiemensDataType,System.UInt16,System.String,System.Int32)">
            <summary>
            向PLC中写入指定长度的字符串,超出截断，不够补0，编码格式为ASCII
            </summary>
            <param name="type">要写入的数据类型</param>
            <param name="address">要写入的数据地址</param>
            <param name="data">要写入的实际数据</param>
            <param name="length">指定的字符串长度，必须大于0</param>
            <returns>返回读取结果</returns>
        </member>
        <member name="M:IndustryEthernet.SiemensNet.WriteUnicodeStringIntoPLC(IndustryEthernet.SiemensDataType,System.UInt16,System.String)">
            <summary>
            向PLC中写入字符串，编码格式为Unicode
            </summary>
            <param name="type">要写入的数据类型</param>
            <param name="address">要写入的数据地址</param>
            <param name="data">要写入的实际数据</param>
            <returns>返回读取结果</returns>
        </member>
        <member name="M:IndustryEthernet.SiemensNet.WriteUnicodeStringIntoPLC(IndustryEthernet.SiemensDataType,System.UInt16,System.String,System.Int32)">
            <summary>
            向PLC中写入指定长度的字符串,超出截断，不够补0，编码格式为Unicode
            </summary>
            <param name="type">要写入的数据类型</param>
            <param name="address">要写入的数据地址</param>
            <param name="data">要写入的实际数据</param>
            <param name="length">指定的字符串长度，必须大于0</param>
            <returns>返回读取结果</returns>
        </member>
        <member name="M:IndustryEthernet.SiemensNet.WriteIntoPLC(IndustryEthernet.SiemensDataType,System.UInt16,System.Int16[])">
            <summary>
            向PLC中写入short数据，返回值说明
            </summary>
            <param name="type">要写入的数据类型</param>
            <param name="address">要写入的数据地址</param>
            <param name="data">要写入的实际数据</param>
            <exception cref="T:System.ArgumentNullException">写入的数据不能为空</exception>
            <returns>返回写入结果</returns>
        </member>
        <member name="M:IndustryEthernet.SiemensNet.WriteIntoPLC(IndustryEthernet.SiemensDataType,System.UInt16,System.Byte[])">
            <summary>
            向PLC中写入数据，返回值说明
            </summary>
            <param name="type">要写入的数据类型</param>
            <param name="address">要写入的数据地址</param>
            <param name="data">要写入的实际数据</param>
            <exception cref="T:System.ArgumentNullException">写入的数据不能为空</exception>
            <returns>返回写入结果</returns>
        </member>
        <member name="T:IndustryEthernet.SiemensDataType">
            <summary>
            西门子的数据类型
            </summary>
        </member>
        <member name="M:IndustryEthernet.SiemensDataType.#ctor(System.Byte)">
            <summary>
            如果您清楚类型代号，可以根据值进行扩展
            </summary>
            <param name="code"></param>
        </member>
        <member name="P:IndustryEthernet.SiemensDataType.DataCode">
            <summary>
            类型的代号值
            </summary>
        </member>
        <member name="F:IndustryEthernet.SiemensDataType.M">
            <summary>
            M寄存器
            </summary>
        </member>
        <member name="F:IndustryEthernet.SiemensDataType.I">
            <summary>
            I寄存器
            </summary>
        </member>
        <member name="F:IndustryEthernet.SiemensDataType.Q">
            <summary>
            Q寄存器
            </summary>
        </member>
        <member name="T:IndustryEthernet.Net_Simplify_Base">
            <summary>
            提供同步访问客户端服务器端共有的属性方法
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_Simplify_Base.TranslateDataToSend(System.Byte[],System.Int32)">
            <summary>
            将需要发送的数据进行加密并添加相应的暗号说明
            </summary>
            <param name="send">需要发送字节数据</param>
            <param name="headcode">数据的暗号</param>
            <returns></returns>
        </member>
        <member name="T:IndustryEthernet.Net_Simplify_Client">
            <summary>
            用户同步访问数据的客户端类
            在客户端设置参数后，调用方法即可成功读取服务器数据，甚至是文件
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_Simplify_Client.#ctor(System.Net.IPEndPoint)">
            <summary>
            实例化一个客户端的对象，用于和服务器通信
            </summary>
            <param name="end_point">服务器的通信地址</param>
        </member>
        <member name="M:IndustryEthernet.Net_Simplify_Client.ReadFromServer(System.String)">
            <summary>
            客戶端向服務器進行請求，發送的內容是字符串
            </summary>
            <param name="send"></param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.Net_Simplify_Client.ReadFromServer(System.Byte[])">
            <summary>
            客戶端向服務器進行請求，發送的內容是字節數據
            </summary>
            <param name="send"></param>
            <returns></returns>
        </member>
        <member name="M:IndustryEthernet.Net_Simplify_Client.ReadFromServerBase(System.Byte[],System.Int32)">
            <summary>
            需要发送的底层数据
            </summary>
            <param name="send">需要发送的底层数据</param>
            <param name="headcode">数据的指令头</param>
            <returns></returns>
        </member>
        <member name="T:IndustryEthernet.Net_Simplify_Server">
            <summary>
            用戶同步訪問數據的服務器類
            該類運行在服務器端，用來收發所有的消息，需要配置相關的參數，然後啟動系統
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_Simplify_Server.IsStarted">
            <summary>
            服务器引擎是否启动
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Simplify_Server.ReceiveStringEvent">
            <summary>
            接收字符串信息的事件
            </summary>
        </member>
        <member name="E:IndustryEthernet.Net_Simplify_Server.ReceivedBytesEvent">
            <summary>
            接收字节信息的事件
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_Simplify_Server.Server_Start(System.Int32)">
            <summary>
            启动服务器的引擎
            </summary>
            <param name="port">指定一个端口号</param>
        </member>
        <member name="M:IndustryEthernet.Net_Simplify_Server.SendMessage(IndustryEthernet.HuStateOne,System.String)">
            <summary>
            向指定的通信对象发送字符串数据
            </summary>
            <param name="socket">通信对象</param>
            <param name="str">实际发送的字符串数据</param>
        </member>
        <member name="M:IndustryEthernet.Net_Simplify_Server.SendMessage(IndustryEthernet.HuStateOne,System.Byte[])">
            <summary>
            向指定的通信对象发送字节数据
            </summary>
            <param name="socket"></param>
            <param name="bytes"></param>
        </member>
        <member name="F:IndustryEthernet.Net_Simplify_Server.log_record">
            <summary>
            日志保存类
            </summary>
        </member>
        <member name="T:IndustryEthernet.Net_SoftUpdate_Server">
            <summary>
            用於服務器端支持全自動的軟件升級的類
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_SoftUpdate_Server.FileUpdatePath">
            <summary>
            系統升級時客戶端軟件所在的文件夾
            默認為C:\HuShaoLin
            </summary>
        </member>
        <member name="P:IndustryEthernet.Net_SoftUpdate_Server.is_engine_start">
            <summary>
            服務器引擎是否啟動
            防止冗餘調用啟動
            </summary>
        </member>
        <member name="M:IndustryEthernet.Net_SoftUpdate_Server.AutoUpdateEngineStart(System.Int32)">
            <summary>
            啟動全自動更新的引擎
            同時連接數量最大為200個
            啟動的端口諕為13141
            </summary>
        </member>
        <member name="F:IndustryEthernet.Net_SoftUpdate_Server.log_record">
            <summary>
            日志存储快
            </summary>
        </member>
        <member name="T:IndustryEthernet.FileOperateControl">
            <summary>
            上传或下载的控件
            </summary>
        </member>
        <member name="M:IndustryEthernet.FileOperateControl.#ctor(System.Guid,System.Net.IPEndPoint,System.String,System.String,System.String,System.String)">
            <summary>
            上传的实例化方法
            </summary>
            <param name="token">网络令牌</param>
            <param name="endpoint">服务器的端口地址</param>
            <param name="filepath">完整的文件路径</param>
            <param name="factory">文件所属的工厂</param>
            <param name="group">文件所属的分类</param>
            <param name="id">文件所属的设备ID</param>
        </member>
        <member name="M:IndustryEthernet.FileOperateControl.#ctor(System.Guid,System.Net.IPEndPoint,System.String,System.String)">
            <summary>
            下载的实例化方法
            </summary>
            <param name="token">网络令牌</param>
            <param name="endpoint">服务器的端口地址</param>
            <param name="filepath">服务器的文件路径</param>
            <param name="savepath">本地保存的路径</param>
        </member>
        <member name="P:IndustryEthernet.FileOperateControl.IpEndServer">
            <summary>
            服务器地址终结点
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileOperateControl.IsOperateFinished">
            <summary>
            指示本次上传或是下载是否结束
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileOperateControl.FilePath">
            <summary>
            文件的原始路径
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileOperateControl.Factory">
            <summary>
            文件所属的工厂分类
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileOperateControl.Group">
            <summary>
            文件所属的类别
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileOperateControl.Id">
            <summary>
            文件所属的特殊ID
            </summary>
        </member>
        <member name="P:IndustryEthernet.FileOperateControl.SavaPathDirectory">
            <summary>
            文件保存的路径，文件下载的时候所需的
            </summary>
        </member>
        <member name="M:IndustryEthernet.FileOperateControl.StartUploadFile">
            <summary>
            开始上传文件
            </summary>
        </member>
        <member name="M:IndustryEthernet.FileOperateControl.ThreadPoolCheckConnect(System.Object)">
            <summary>
            检查超时的子线程
            </summary>
            <param name="obj"></param>
        </member>
        <member name="M:IndustryEthernet.FileOperateControl.StartDownloadFile">
            <summary>
            启动下载文件
            </summary>
        </member>
        <member name="M:IndustryEthernet.FileOperateControl.StartDownloadFileAsync">
            <summary>
            启动一个异步的下载方法
            </summary>
        </member>
        <member name="F:IndustryEthernet.FileOperateControl.components">
            <summary> 
            必需的设计器变量。
            </summary>
        </member>
        <member name="M:IndustryEthernet.FileOperateControl.Dispose(System.Boolean)">
            <summary> 
            清理所有正在使用的资源。
            </summary>
            <param name="disposing">如果应释放托管资源，为 true；否则为 false。</param>
        </member>
        <member name="M:IndustryEthernet.FileOperateControl.InitializeComponent">
            <summary> 
            设计器支持所需的方法 - 不要修改
            使用代码编辑器修改此方法的内容。
            </summary>
        </member>
        <member name="T:IndustryEthernet.FormMatterRemind">
            <summary>
            用于稍微耗时事件处理时的消息框提醒
            </summary>
        </member>
        <member name="M:IndustryEthernet.FormMatterRemind.#ctor(System.String,System.Action)">
            <summary>
            实例化一个耗时处理的对象
            </summary>
            <param name="description">需要显示的文本描述</param>
            <param name="action">需要操作的方法</param>
        </member>
        <member name="F:IndustryEthernet.FormMatterRemind.components">
            <summary>
            Required designer variable.
            </summary>
        </member>
        <member name="M:IndustryEthernet.FormMatterRemind.Dispose(System.Boolean)">
            <summary>
            Clean up any resources being used.
            </summary>
            <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        </member>
        <member name="M:IndustryEthernet.FormMatterRemind.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="T:IndustryEthernet.FormFileOperate">
            <summary>
            用于文件上传或下载的窗口
            </summary>
        </member>
        <member name="M:IndustryEthernet.FormFileOperate.#ctor(System.Guid,System.Net.IPEndPoint,System.String[],System.String,System.String,System.String)">
            <summary>
            实例化一个文件上传的窗口
            </summary>
            <param name="token">网络令牌</param>
            <param name="endpoint">服务器远程地址</param>
            <param name="files">等待上传的文件数组</param>
            <param name="factory">工厂大类</param>
            <param name="group">分类</param>
            <param name="id">设备序号</param>
        </member>
        <member name="M:IndustryEthernet.FormFileOperate.#ctor(System.Guid,System.Net.IPEndPoint,System.String[],System.String)">
            <summary>
            实例化一个文件下载的窗口
            </summary>
            <param name="token">网络令牌</param>
            <param name="endpoint">服务器的远程地址</param>
            <param name="files">等待下载的文件</param>
            <param name="savepath">保存路径</param>
        </member>
        <member name="P:IndustryEthernet.FormFileOperate.is_down_file">
            <summary>
            是否是下载文件操作
            </summary>
        </member>
        <member name="F:IndustryEthernet.FormFileOperate.components">
            <summary>
            Required designer variable.
            </summary>
        </member>
        <member name="M:IndustryEthernet.FormFileOperate.Dispose(System.Boolean)">
            <summary>
            Clean up any resources being used.
            </summary>
            <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        </member>
        <member name="M:IndustryEthernet.FormFileOperate.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="T:IndustryEthernet.SerialSupport.CRC">
            <summary>
            用于CRC16验证的类，提供了标准的验证方法
            </summary>
        </member>
        <member name="M:IndustryEthernet.SerialSupport.CRC.CheckCRC16(System.Byte[])">
            <summary>
            校验对应的接收数据的CRC校验码
            </summary>
            <param name="data">需要校验的数据，带CRC校验码</param>
            <returns>返回校验成功与否</returns>
        </member>
        <member name="M:IndustryEthernet.SerialSupport.CRC.CRC16(System.Byte[])">
            <summary>
            获取对应的数据的CRC校验码
            </summary>
            <param name="data">需要校验的数据，不包含CRC字节</param>
            <returns>返回带CRC校验码的字节数组，可用于串口发送</returns>
        </member>
        <member name="T:IndustryEthernet.SerialSupport.SerialBase">
            <summary>
            所有串行通信类的基类，提供了一些基础的服务
            </summary>
        </member>
        <member name="F:IndustryEthernet.SerialSupport.SerialBase.SP_ReadData">
            <summary>
            用于通信的基础串口
            </summary>
        </member>
        <member name="M:IndustryEthernet.SerialSupport.SerialBase.SerialPortInni(System.String)">
            <summary>
            初始化串口信息
            </summary>
        </member>
        <member name="M:IndustryEthernet.SerialSupport.SerialBase.SerialPortInni(System.Action{System.IO.Ports.SerialPort})">
            <summary>
            根据自定义初始化方法进行初始化串口信息
            </summary>
        </member>
    </members>
</doc>